How to Set Target for OEE

Introduction 

This document is about how to set the target for OEE, and includes:

The target fields table and how to define the target value in the system.

Which OEE Modules or pages will be impacted once the fields are updated.

 

Target Fields 

  For OEE, the users need to configure two tables (SOMS_Target, OEE_Target) with the target values for OEE, in the module Target Maintenance.  

SOMS_Target table

  Figure 1: SOMS Target Fields

 

OEE_Target table

  Figure 2: OEE Target Fields

 

SOMS_Target

  The OEE features that require the values of the SOMS Target fields are:  

OEE Performance value for target qty = TargetTPhr * duration:

   Soms_target fields: Part Number/Family, TargetTPhr, Workstation/Process/MFG Line/Asset

 

2. OEE Workbench to get Target:

Soms_target fields: Part Number, Workstation or Process or MFG Line, TargetHPU   Figure 3: SOMS Target Example       Note: Please visit the OEE Configuration(target maintenance section) to see the priorities for the fields about part number/process/workstation.  

OEE_Target

  The OEE features that require the values of the OEE Target fields are:   (1) 42Q Live/Operation Dashboard/OEE Dashboard to identify the OEE health status, such as Green, Yellow, Red.

OEE_Target fields: Asset Name, OEE, OEE Yellow, TEEP, TEEP Yellow, A, A Yellow, P, P Yellow, Level, Coordinates, Site, Asset Type fields.    (2) MTBF And MTTR Report: 
Figure 4: OEE Target Example    

Steps and Details

 

Configure data in Shop Floor Configuration

The users need to configure Location/Process/MFG Line/Part Number/Family/Route in the Shop Floor Control Module.

Navigate to Shop Floor Control > Configuration > Shop Floor Configuration, to configure the necessary data. 

Location

Process

MFG Line

Part Number/Family

Route

  Please visit the  Location, MFG Line, Part Number, Route  for more information.  

Configure Target

Navigate to Shop Floor Control > Configuration > Target Maintenance, to configure the SOMS target and OEE target.   If it is the first time to set the Target value and do not have the table, the users can create the soms_target tables and the OEE_Target tables by importing the SOMS_Target and OEE_Target .csv file:  

At the Target Maintenance page, select the + Icon to open the Target Form sub-page.

Input the Target Name.

Select the Select… to open the prepared file with the target values.

Select Save to import the target table with target values.

Figure 5: Create Target Table

 

  If you already have the two tables, you just need to search and open them, then add/delete/update one or more columns/lines. Here is an example for adding one target line.

At the Target Maintenance page, enter the target name in the Target Name field, then select Filter to search your existing target table.

Double-click on the Target name field to open the target table.

Select Create line, there will be a new line in the bottom.

Enter the values for the needed fields then select Save Tab.

The new target line will be saved into the system.

  Figure 6: Search the Target table

    Figure 7: Create Target Line

 
Please visit the Target Maintenance for more information.  

Effects of these fields:

 

SOMS_Target effects

 

The fields TargetHPU, TargetTPhr defined in the SOMS_Target table will affect items in the OEE Data Collection and the OEE Workbench modules.  

OEE Data Collection

  In the OEE Data Collection module to report a new asset event, when users enter/select the Asset, Asset Status(Running), Location, Shop Order, Part Number, Start Time, End Time, then the Target UPH/Target QTY will be filled automatically.   Figure 8: OEE Data Collection Report Asset Event

    OEE Performance = Finished QTY / Target QTY

Target QTY = TargetTPhr * duration

TargetTPhr = TargetUPH = Target Unit Per Hour

duration = End Time - Start Time  

OEE Workbench

In the OEE Workbench/PWB module, the progress bar will be in different colors according to the TargetHPU.

 

TargetHPU = TargetHourPerUnit 

The progress bar will be displayed like the below pic.

0-->50%: GREEN | 50-->99%: ORANGE | 99% or more: RED

Figure 9: OEE Workbench Progress bar

   

OEE_Target effects

Asset Name

OEE/OEE Yellow; TEEP/TEEP Yellow; A/A Yellow; P/P Yellow; Q/Q Yellow; Level; Coordinates; Site; U/U Yellow

Target MTTR; Target MTBF

 

MTBF and MTTR Report

The fields Target MTTR and Target MTBF defined in the OEE_Target table will affect the MTBF And MTTR Report.

 

Figure 10: MTBF and MTTR Report

   

42Q Live/OEE Dashboard 

  The fields Asset Name, OEE, OEE Yellow, TEEP, TEEP Yellow, A, A Yellow, P, P Yellow, Level, Coordinates, Site, Asset Type defined in the OEE_Target table will affect the 42Q Live/Operation Dashboard/OEE Dashboard to identify the OEE health status, such as Green, Yellow, Red.

 

Figure 11: 42Q Live

 

 

  Figure 12: OEE Dashboard