SOP-42Q-MES0175-A SPC Dashboard Maintenance

From 42Q
Revision as of 21:30, 20 February 2023 by Marisol vargas (talk | contribs)
Jump to navigation Jump to search

42Q Home > Quality > SPC Dashboard

   

Administration
SPC Dashboard Maintenance
Version MES 15.75
Revision A1

 

 

Introduction

At the SPC Dashboard Maintenance module, users can add, edit or delete the dashboard, dashboard, and users can define the dashboard to show the charts for special monitor groups.

Go to Administration > SPC Dashboard Maintenance 

 

Figure 1: SPC Dashboard Maintenance

SPCDM MainMenu.png

 


Add SPC Dashboard

Users can add a new SPC Dashboard.

  1. Select the Add
  2. Complete the fields:
  • Name: The name of the SPC dashboard.
  • Title: The title of the SPC dashboard.
  1. Select the below from their respective drop down buttons:
  • Monitor Group: Select the Monitor group from the drop-down list

Note: The Monitor groups were defined at the SPC monitor group module.

  • Number of Points: To define the max points that show on one page.
  • Time Frame of Pareto(Hours): To define the time range of the date to show the Pareto chart.
  • Refresh Rate(Seconds): To define the refresh rate between the monitors of the monitor groups for the SPC dashboard. 
  1. Choose aTheme
  • Theme: The background color of the theme can be black or white.
  1. SelectSave orCancel to continue

 

Figure 2: Add SPC Dashboard

SPCDM AddSPC.png

 

 


Edit SPC Dashboard

Users can edit their created SPC Dashboards.

  1. Select the SPC dashboard then select Edit
  2. Change the fields as needed.
  3. Select Save to update an SPC dashboard.

 

Figure 3: Edit SPC Dashboard

SPCDM EditSPC.png

 

 


Delete SPC Dashboard

Users can delete an SPC Dashboard.

  1. Select the SPC dashboard then select Delete
  2. Will pop-up a window to ask the users to confirm.
  3. Select Yes to delete the SPC dashboard.

 

Figure 4: Delete SPC Dashboard

SPCDM DeleteSPC.png

 

SPC Dashboard

  1. To see the SPC dashboard, please navigate to the Quality > SPC Dashboard.

Figure 5: SPC Dashboard List.

Figure 5- SPC Dashboard List..png

  1. Select the Go at the right to see the SPC Dashboard.

Figure 6: SPC Dashboard -Monitor 1

Figure 6- SPC Dashboard -Monitor 1.png

 

Figure 7: SPC Dashboard -Monitor 2

Figure 7- SPC Dashboard -Monitor 2.png

 

Figure 8: SPC Dashboard -Monitor 3

Figure 8- SPC Dashboard -Monitor 3.png

 

 

As shown above, there are three icons at the top:

  • CURRENT NUMBER: The current monitor and the total numbers of monitors at the monitor groups which have data in charts in the past hours.

Note: The hour was defined at theSPC system Parameter Maintenance.

  • ABNORMAL MONITORS: The number of monitors at the monitor groups and these monitors has data that are out of control in the charts.
  • ALERTS IN PAST 60 MINUTES: The number of Emails that will be sent to associated users for that points were out of control (abnormal points) .

Note: In the example above, the SPC dashboard will show the monitors one by one every 30 seconds. The values 30 times were defined at the SPC dashboard configuration. (See figure 3).

Note: If all the monitors there are no data at the SPC dashboard, the system will refresh every 2 minutes.

  1. Users change the SPC dashboard configuration by selecting the icon at the right top.

Figure 9: SPC Dashboard Configuration

Figure 9- SPC Dashboard Configuration.png

 

 

 

Retrieved from "https://42qrpt1.42-q.com/mes_wiki/index.php?title=SOP-42Q-MES0175-A_SPC_Dashboard_Maintenance&oldid=45297"