SOP-42Q-MES0012 Product Route Maintenance

42Q Home > Shop Floor Control > Configuration > Product Route Maintenance
 

 

 

 

Shop Floor Control Configuration Product Route Maintenance Version MES 15.75 Revision H1  

 

 

 

 

Shop Floor Configuration Setup

42Q’s powerful data collection system collects critical information from a plant’s shop floor, utilizing a shop floor data collector, an intuitive tool developed by 42Q’s experienced manufacturing team. The aggregate information is stored in a cloud database, and available to MESWeb, where quality reports are generated. The 42Q system uses manual and automated barcode scanning to collect data for a product line or plant. Thus, 42Q plays an important role in maintaining unit histories and directing product movement on the manufacturing floor. The current version of 42Q includes configuration capabilities, which provide access to all sub-module pages and their functionalities (view, add, edit, print/generate output files).

Note: A user only has access to the modules assigned to his/her profile. 

 

 

Product Route Maintenance

A route is the sequence of steps that a product follows to complete the manufacturing process. A route also controls rework requirements. The Product Routing Manager creates, views, and updates Route definitions. Shop Floor Configuration assigns every product to a route. The route should be flow-charted as a reference for the actual process prior to creating the route definition.

To access Product Route Maintenance, navigate to Shop Floor Control > Configuration > Shop Floor Configuration > Product Route.

 

Figure 1: Product Route

 

Product Route List 

Once the user selects theProduct Route icon in the main menu, a list of available routes will be displayed.

The Product Route List window is displayed:

 

Figure 2: List Route

 

The user is able to use the pagination feature to navigate between the Assemblies pages.

 

 

Route Naming Conventions

As a general rule, route names should be prefaced with a character and a colon ":" to easily identify the type of route, as well as simplify sorting and/or filtering. The route type would depend on its intended use. For example, Product Specific, Generic/General Shared, Sub route, and Master Sub route.

Product Specific Routes are assigned only to a single product or part number. The route name will begin with "P: " (for Product) identifying it as a product-specific route.

 

Product Specific Route Examples:

P:VALBB_TCOMP

If multiple routes are to be created for the same part number, add a -A, -B (or -1, -2) suffix to the end of the Route Name.

Multiple Product Specific Route Examples:

P:LF563-041-A

P:LF563-041-B

P:LF563-041-C

 

Generic/General Shared Product Routes are assigned to multiple products or product lines, or family. The route name will begin with “G:” (for Generic or General) identifying it as a generic/general shared route. When using a part number as part of the route name, use the standard masking format (a for letters, and n for numbers) where necessary.

Generic Shared Product Route Examples:

G:GE1006711-9m

G:GE1006712-9m

 

Subroutes are used in multiple product specific, or generic/general shared routes. The route name will begin with “S:” identifying it as a subroute.

Standard Subroute Example:

S: AUDT-SHIP-SUBVC

S: AUDT-CMP1

Above identifies a subroute with definite 'from' and 'pass' locations.

 

Subroute Exit Example:

S: ADT1 – (?)

S: AXI1 – (?)

Above identifies a subroute as a subroute exit. The 'pass to' location, denoted by the “(?)” is defined in the product route.

Subroute Entry Example:

S: (?) – PURG

S: (?) - OBAT

Above identifies a subroute as a subroute entry. The 'from' location, denoted by the “(?)” is defined in the product route.

Master Subroutes are Subroutes that are used in all (or many) P: Part_Number or G: Generic_Route routes. Master Subroutes provide an easy way of adding/modifying routes (mass rework, scrap, evaluation, etc.) that affect every part number. The route name will begin with “M: ” identifying it as a master subroute.

Master Subroute Example:

M: Master – MFG

M: Master - RMA

 

Filter Routes

This functionality enables the user to search for a specific route from all available routes.

To perform the filter search, populate the desired filter fields then select Filter.

Select Clear to clear the filter fields.

 

Figure 3: List Route – Filters

 

 

 

Add Route

This functionality enables the user to add a new route to the database.

To add a route, select the Add icon located in the List Route main screen. The Route form is displayed:

 

Figure 4: Add Route

 

1. Select the desired Shop Floor ID from the drop-down list.

2. Enter the Route Name.

As a general rule, it is preferred that the aforementioned Route Naming Conventions be used when naming routes.

3. Enter a brief route Description.

Note: This is a user defined field. It is often useful to describe the route in this field.

4. The Route Step form is displayed.

 

Figure 5: Route Step page

Once this information is Saved, theRoute Step form is displayed.

 

Figure 6: Route Step

 

There are four different route options used to create routes:Standard, Subroute Entry, Subroute Exit, Inserted Subroute, andStart?.

 

 

 

Standard Route Option

The standard route option is the most basic of all route types. The steps need to be defined with each new route created. The configuration of a Standard Route Option can be completely unique to this route.

As a general rule, when a commonly used route step configuration is desired, utilizing Subroute type Options is preferred. These route options allow the user to avoid having to reconfigure the same Location multiple times for each new route, which is the case when using the Standard Route Option. The Subroute Option provides an extremely fast means for updating multiple product routes that call the subroute. The user is only required to update one route; therefore any/all routes calling the subroute will follow its Route Step configuration. Subroutes are called by selecting Inserted Subroute Option when creating the route.

 

Figure 7: Route Step - Standard

1. Select the Step number, then the Standard option, and check Start? if the step is a start location.

Note: The Step number is used for ordering the route steps.

 

As a general rule, configure each Route Step in chronological order with the process flow of the product.

2. Enter, or select from the drop-down menu, the desired Location name.

Location: Defines the Location in the assembly process where the product is scanned. The location must be unique from all other Locations within the Route, including subroutes.

Note: Only locations associated with the selected Shop Floor ID are displayed.

3. Enter, or select from the drop-down menu, the desired Pass Location.

Pass: Defines the pass located in the assembly process. This Location should be a Logical Location with an On the Line status. This allows multiple Locations with the same Process name to pass to a common holding area for the next Location in the Route. It is mandatory to select the Pass step.

Note: Only On the Line status locations associated with the Shop Floor ID are displayed.

4. Enter, or select from the drop-down menu, the desired Fail Location.

Fail: Defines the fail location in the assembly process. This Location should be a Logical Location with an In Repair status.

Note: if the option FAIL_TO_LOC_ON_LINE is enabled in Setup Data Editor, the users are able to set up Fail To location with the location's 20/28 statuses.

Note: Only In Repair status locations associated with the Shop Floor ID selected in the previous Route are displayed.

5. Enter, or select from the drop-down menu, the desired Shop Floor''''ID,' and Src. Loc. 1: (Source, or 'from' Location) Up to four Source Locations may be defined for a single route step.

Source Locations: define the location from which a unit is accepted. If a unit is at any location other than one of the four listed, a Flow Error occurs and the product is not accepted. This Location is one of the Logical Locations used as a pass or fail in any of the previous steps. Unless this route step has a Start status, at least one from Location should be selected. If no Source Location is defined, and it is not a Start Step, the route step location is able to accept units from any location on the same Shop Floor ID. Caution should be taken when leaving the Source Locations blank as the flow of control provided by the route is compromised. Leaving Source Locations blank is not a preferred routing strategy in most production location steps.

By default, the Shop Floor ID selected in the first step is displayed. The user may select any Shop Floor ID and Location desired. If selecting a Shop Floor ID other than the one selected in the first step, keep in mind that this route step must be a Start step and the location selected as the Source Location on the other Shop Floor ID must be status On the Line Hold or In Repair Hold.

Note: As a general rule, Source Location 1 is defined as the same location selected for the Route Step. The scan location must always accept itself to avoid Flow Errors.

6. Check the Add More? checkbox to insert additional route steps, or remove the check if this is the last Route Step to be defined for this route.

Note: If Add More? The checkbox was checked, and the user is able to define another Route Step.

The route step list is displayed. If no update is necessary, select Save. A confirmation message is displayed.

 

Figure 8: Route Saved 

Figure 9: Created Route

Sub route Entry Route Option

The Sub route options indicate that a route step will be configured separately from a product route and will be called by another route (using the Inserted Sub route option). When a Sub route option is selected, all input fields except for the required input fields are disabled. The Sub route Entry Route Option indicates the step is an entry for the sub route used by another route. All source locations are disabled and the route calling the Sub route will provide the Source Locations.

As a general rule, when a commonly used route step configuration is desired, utilizing Sub route type Options is preferred. These route Options avoid having to reconfigure the same Location steps over and over again, with each new route, which is the case when using the Standard Route Option. The Sub route Option provides rapid means for updating multiple product routes that call the subroute. The user is only required to update one route; therefore any route calling the subroute will follow its Route Step configuration. Subroutes are called by selecting Inserted Sub route Option when creating the route.

 

Figure 10: Subroute Entry

1. Select the Step number, then select Subroute Entry, and check the Start? checkbox if the step will be a start location.

Note: The Step number is used for ordering the route steps.

As a general rule, configure each Route Step in chronological order with the process flow of the product.

2. Enter, or select from the drop-down menu, the desired Location name.

    Location: Defines the Location in the assembly process where the product is scanned. The location must be unique from all other Locations within the Route, including subroutes.

Note: Only locations associated with the selected Shop Floor ID are displayed.

3. Enter, or select from the drop-down menu, the desired Pass Location.

    Pass: Defines the pass location in the assembly process. This Location should be a Logical Location with an On the Line status. This allows multiple Locations with the same Process name to pass to a common holding area for the next Location in the Route. It is mandatory to select the Pass step.

Note: Only On the Line status locations associated with the Shop Floor ID selected are displayed.

4. Enter, or select from the drop-down menu, the desired Fail Location.

    Fail: Defines the fail location in the assembly process. This Location should be a Logical Location with an In Repair status.

Note: Only In Repair status locations associated with the Shop Floor ID selected are displayed.

5. The Source Locations are disabled because the route calling the Sub route will provide the Source Locations when configuring the Inserted Subroute Option.

6. Check the Add More? Check-box to insert additional route steps, else remove the check if this is the last Route Step to be defined for this route.

7. Click Save to proceed to the Route Step List page.

 

 

Subroute Exit Route Option

The Subroute options indicate that a route step will be configured separately from a product route and will be called by another route (using the Inserted Subroute option). When a Subroute option is selected, all input fields except for the required input fields are disabled. The Subroute Exit Route Option indicates the step is an exit for the subroute used by another route. The Pass Location is disabled because the route calling the Subroute will provide the Pass Locations.

As a general rule, when a commonly used route step configuration is desired, utilizing Subroute type Options is preferred. These route Options avoid having to reconfigure the same Location steps over and over again, with each new route, which is the case when using the Standard Route Option. The Subroute Option provides an extremely fast method for updating multiple product routes that call the subroute. The user is only required to update one route; therefore any route calling the subroute will follow its Route Step configuration.

 

Figure 11: Subrout Exit

1. Select the Step number, then select Subroute Exit, and check the Start? checkbox if the step is a start location.

Note: The Step number is used for ordering the route steps.

As a general rule, configure each Route Step in chronological order with the process flow of the product.

2. Enter, or select from the drop-down menu, the desired Location name.

Location: Defines the Location in the assembly process where the product is scanned. The location must be unique from all other Locations within the Route, including subroutes.

Note: Only locations assigned to the selected Shop Floor ID are displayed.

3. Pass location is disabled because the route calling the Subroute will provide the pass locations when configuring the Inserted Subroute Option.

4. Enter, or select from the drop-down menu, the desired Fail Location.

Fail: Defines the fail location in the assembly process. This Location should be a Logical Location with an In Repair status.

Note: Only In Repair status locations associated with the selected Shop Floor ID are displayed.

5. Enter, or select from the drop-down menu, the desired Shop Floor'ID' and Src. Loc. 1: (Source, or from Location) Up to four Source Locations may be defined for a single route step.

Source Locations define the Location from which a unit is accepted. If a unit is at any location other than one of the four listed, a Flow Error occurs and the product is not accepted. This Location is one of the Logical Locations used as a pass or fail in any of the previous steps. Unless this route step has a Start status, at least one from the location should be selected. If no Source Location is defined, and it is not a Start Step, the route step location is able to accept units from any location on the same Shop Floor ID.

Caution should be taken when leaving the Source Locations blank as the flow of control provided by the route is compromised. Leaving Source Locations blank is not a preferred routing strategy in most production location steps.

By default, the Shop Floor ID selected is displayed. The user may select any Shop Floor ID and Location desired. If selecting a Shop FloorC ID other than the one selected in the first step, keep in mind that this route step must be a Start step and the location selected as the Source Location on the other Shop Floor ID must be status On the Line Hold, or In Repair Hold.

Note: As a general rule, Source Location 1 is defined as the same location selected for the Route Step, which is itself. The scan location must always accept itself to avoid Flow Errors.

6. Check the Add More? checkbox to insert additional route steps, else remove the check if this is the last Route Step to be defined for this route.

Note: If Add More? Check-box was checked, and the user is returned to define another Route Step.

7. Select Save to proceed to the Route Step List page.

 

Inserted Subroute Option

The Subroute options indicate that a route step will be configured separately from a product route and will be called by another route (using the Inserted Subroute option). When the Inserted Subroute Option is selected, all input fields except for the required input fields are disabled. The Inserted Subroute Option indicates the step will insert a previously created subroute. The required input fields are displayed as required, depending on the route type option selected.

The following conditions are implied when inserting subroutes:

• If a Standard Subroute is selected, no other input field is required.
• If a Subentry Subroute is selected, only the Source Locations will be required.
• If a Subexit Subroute is selected, only the Pass Location will be required.

As a general rule, when a commonly used route step configuration is desired, utilizing Subroute type Options is preferred. These route Options avoid having to reconfigure the same Location steps over and over again, with each new route, which is the case when using the Standard Route Option. The Subroute Option provides an extremely fast method for updating multiple product routes that call the subroute. The user is only required to update one route; therefore any/all routes calling the subroute will follow its Route Step configuration.

 

Figure 12: Inserted Subroute Option

1. Select the Step number, then select Inserted Subroute, and un-check the Start? checkbox.

Note: The Step number is used for ordering the route steps.

As a general rule, configure each Route Step in chronological order with the process flow of the product. Inserted Subroute Options are rarely flagged as Start status as this should be defined in the subroute.

2. Enter, or select from the drop-down menu, the desired Subroute name.

Note: Only Subentry and Subexit Subroutes associated with the selected Shop Floor IS are displayed.

If the standard route naming convention was followed, the user can type the Subroute prefix (S:) to retrieve the desired subroute names.

3. Check the Add More? checkbox to insert additional route steps, else remove the check if this is the last Route Step to be defined for this route.

4. Select Save to proceed to the Route Step List page.

 

Start

Start defines the status of each Route step. Select Yes if any of the following conditions exist:

• The product is scanned for the first time and the serial record is created.
• The product has a serial record create, released on a Shop Order, and is scanned for the first time at the location specified as a start step.
• The product is associated with another Route (same or different Shop Floor ID) and is scanned for the first time as a step in this Route. The product must be in anOnline Hold or In Repair Hold location and be listed as a 'from' location for the start step location.

 

Edit Route

This functionality enables the user to edit any of the available fields to update a Route.

Note: Fifty-five minutes after the Route has been opened for Edit, the system warns the user that the edit time will expire. Five minutes after the warning, the route update page is closed and the user is redirected to the main route list. MES does not allow editing a Route at the same time by two different users. If a Route is being edited by one user and another user opens the route, a message is displayed stating the route is locked for editing and is read-only.

1. To edit a route, select the Route to be updated then select Edit from the List Route main screen.

Figure 13: List Route - Edit Route

The Route Step List is displayed:

Figure 14: Route Step List

The route information containsRoute Name, Description, Shop Floor ID, Update Date/Time, Steps, andthe Installer.

The colors in the tree depend on theLocation status.

 

Add Route Step

This functionality enables the user to add a route step to the selected Route.

1. To add a route step, select the Add icon.

The Route Step Configuration form is displayed:

 

Figure 15: Add Route Step

2. Reference section Add Route for additional details, as this is the same process (with the exception of selecting the Shop Floor ID, creating the Route Name, and Description, as these tasks, only occur when creating a new route).

 

Edit Route Information

This functionality enables the user to edit the Route Name and Description.

1. To edit Route Information, select the main Route Name from the display window, and then select Edit.

2. The Route Information page is displayed:

 

Figure 14: Edit Route

3. Make the necessary updates and click on Save.

As a general rule, it is preferred that the Route Naming Conventions be used when naming routes.

 

Edit Steps of Route

This functionality enables the user to modify any of the available fields to update a step route.

1. To edit a step route, first, select the step to be edited, and then select Edit.

The Route Step Information window displays.

 

Figure 15: Route Step Information

The route step information contains Step, Option (Standard, SubEntry, SubExit, and SubRt – Inserted Subroute), Location, Subroute, Pass and Fail (next step options), Source Locations and Is Start (true or false).

From the Route Step List, the user can perform the following operations for the selected Step:

• Add
• Edit Steps information
• Copy Steps
• Delete Steps
• Change Step Number

 

Edit Step Information

This functionality enables the user to edit Route step information.

Note: It is not possible to edit an Inserted Subroute. These subroutes must be modified as a Local Route separately.

1. To edit step information, select the desired step and then select Edit.

 

Figure 16: Edit Route Step Information

 

2. Make the necessary updates to the Route Step.

Note: Location is mandatory in this example, though this will not always be the case. This is the case when editing a step that contains an Option of SubRt. As the Option is changed, the required fields are enabled for editing. If a mandatory field is missing information, a warning message is displayed.

3. Select Next to confirm modifications.

 

Copy Route Step

This functionality enables the user to copy Route Steps from one selected step to another.

1. To copy a route step, select the desired step to copy and then select Copy.

The Route Step page is displayed:

 

Figure 17: Copy Route Step

 

2. Enter the desired Step#.

If the entered Step# already exists in the route, a confirmation message is displayed stating the step number already exists and prompts to overwrite the existing step.

Note: the Step number is used for ordering route steps.

As a general rule, configure each Route Step in chronological order with the process flow of the product.

3. Select Save to continue.

A "Successful" message is displayed to the user.

Select Save to install the route.

 

Delete Route Step

This functionality enables the user to delete a selected Step.

1. To delete a route step, select the desired step to delete and then select the Delete icon.

 

Figure 18: Delete a Route Step

A confirmation message is displayed.

Select Save to install the route or Reset to return.

 

Change Route Step Number

This functionality enables the user to change a Route Step Number. The new Step Number must be unique as duplicates are not allowed.

1. To change the route step number, select the desired step and then select Change Step Number.

The Change Step Number popup is displayed:

 

Figure 19: Changing Step Number

2. Enter the desired Step#.

If the entered Step# already exists in the route, an error message is displayed stating the step number already exists. Select Ok to return to the Change Step Number window and re-enter the unique step number.

 

Note: the Step number is used for ordering route steps.

As a general rule, configure each Route Step in chronological order with the process flow of the product.

3. Select Save to continue.

4. Select Save again to install the route.

 

Delete Unused Routes

This functionality enables the user to delete unused routes. It might be utilized when routes for obsolete products are no longer needed.

Prior to deleting a route, the following must be taken into consideration:

• Caution should be used when deleting routes, as the route is removed from the local database. If there is a reason the route needs to be restored, the plant is required to submit a Work Request to have the Shop Floor group restore the route.
• There may not be any serial numbers associated with the route in WIP. Validation is performed on WIP to ensure that there is not any unit with a status of less than 30 attached to the route to be deleted. If there is, a dialog box is displayed stating there is a unit attached to the routing that must first be completed before the route can be deleted.
• There Setup Editor may not contain any active references to the route to be deleted. If references are found, an MES Error box notifies the user that the route is unable to be deleted as it is referenced in the displayed Shop Floor IDs. Any/all references to the route must first be removed from the Setup Editor prior to deletion.
• The system will remove any Part x Route Assignments associated with the route upon deletion.

1. To delete an unused route, select the desired route to be deleted and then select Delete.

A confirmation window is displayed:

 

Figure 20: List Route – Delete Unused Route

2. Select Yes to confirm or No to cancel

3. The route is deleted from the database.

 

Copy Routes

This functionality enables the user to copy an existing route. This may be useful when replicating a complex route that may require little or no modifications. All Route information is copied to the new Route Name.

1. To copy a Route, select the desired Route to copy and then select Copy.

The Copy Route popup is displayed:

 

Figure 21: List Route - Copy

2. Enter the desired Route Name.

As a general rule, it is preferred that the Route Naming Conventions be used when naming routes.

3. Select Save to confirm or Cancel to cancel the route copy.

4. The originally selected route has been copied and added to the database under the new route name.

 

Print/Export Individual Route

This functionality prints the steps of a Route selected from the Routes List. The report results include all Route Information. The report prints to the default printer for the workstation.

1. To print/export an individual route, select the desired route and then select Print/Export.

 

Figure 22: List Route – Print/Export

2. A report is generated and the user is able to save the file or print it.

 

Print/Export Filtered Routes

This functionality enables the user to print or export filtered routes.

1. To print filtered Routes, select Print Filtered Routes from the List Route main screen.

 

Figure 23: Print Filtered Routes

A report is generated and the user is able to save the file or print it.

 

Export All Installed Steps

This functionality enables the user to print or export all Installed Steps.

1. To print all installed steps, select Print All Installed Steps from the List Route main screen.

 

Figure 24: Print All Installed Steps

 

A report is generated and the user is able to save it locally.

 

Where Used List

This functionality is enabled when the selected route is a subroute.

Select the route and then select Where Used List.

 

Figure 25: Where Used List

  

 

Publish History

The Publish History functionality is used by permitted users to show and publish the action history of a Route. To use this functionality

1. Select a route from the list. The Publish History function becomes available for selection.
2. Select Publish History. The Publish History window pops up for the given route. This history shows the Action, Status, Time/Date, and User for each item.
3. Select Publish, to publish the history to the Conduit. Select Close to end or abort.

 

Note: The Publish History Conduit functionality is also available under Part x Route Assignment. The functionality is used the same way as described for List Route.

 

Figure 28: Publish History

 

Part x Route Assignment

This functionality enables the user to view the Part Route Assignments.

All part numbers require a Part x Route Assignment to follow the production process flow defined in the Route. The exception to the addition of a Part x Route Assignment is when the assignment statement is added to the Setup Editor. i.e. NAME PRODUCT=(part mask) ROUTE=(route name)

1. To assign a part to a route, select Part x Route Assignment from the List Route main screen.

 

Figure 29: Add Part X Route Assignment

Figure 30: Add Part x Route Assignment (from Part x Route Assignment List page)

 

1. Select the desired Shop Floor ID;

2. Enter the Part Number;

3. Select the Route.

4. Select Save to commit the addition or Cancel to cancel the action.

5. A successful message displays.

6. The new assignment is displayed at Part / Route Assignment List.

From this page the user is able to Add Part x Route Assignment, Import Part(s) to Assign, Print/Export Filtered Part x Routes as well as Delete part to Route Assignments.

 

Delete Assignment

This functionality enables the user to delete the selected Part x Route Assignment.

1. To delete a Part x Route Assignment, select the desired part x route assignment and then select Delete.

Figure 31: Part x Route Assignment List - Delete

 

2. A confirmation window is displayed;

3. Select Yes to confirm or No to cancel.

4. The selected Part x Route Assignment has been deleted from the database.

 

Print/Export Filtered Part x Route

This functionality enables the user to print or export the filtered Part/Route Assignment List.

1. To print assignments, select Print from the Part x Route Assignment List screen.

 

Figure 32: Print/Export Filtered Part x Routes

 

A .The PDF report is generated:

 

Figure 33: Print/Export Filtered Part x Routes Report

 

 

 

 

Import Part(s) to Assign

This functionality enables the user to import a list of part numbers to assign to a single Route. The import requires the part numbers to be defined in a comma-separated value (CSV) file that has been exported from the Part Maintenance module.

1. Save the CSV file at a known location (the google sheet is a good option to save the template file). This file will be imported in step 4.

Figure 34: Import Part Route Template

2. To import part(s) to assign to a route, select Import Part(s) to Assign.

3. The Part x Route Assignment import page is displayed:

Figure 35: Import Part(s) to Assign

 

4. Select the Shop Floor ID from the drop-down list.

5. Select the Route from the drop-down list.

6. Select Ok to import or Cancel to cancel the import.

 

The Assigning Results confirmation page is displayed:

Figure 36: Part x Route Assignment Import Result

 

Publish History

The Publish History functionality is used by permitted users to show and publish the action history of a Route. To use this functionality.

Figure 37: Publish History

For further information, please see the Publish History topic on page 29.

 

Appendix A

Glossary

Access Control

A module that will set the permissions for users and external customers of 42Q

Administrator

The System Administration has full access - all plants, all reports, all users.

Component

A component is a specific piece of data that appears on a label, for example, bar code, part numbers, graphic images, line or text. Hence, label components are broken down into several different types: text, graphic images, MES database values, or a combination of text and database values.

Framework

In software development, a framework is a defined support structure in which another software project can be organized and developed. A framework may include support programs, code libraries, a scripting language, or other software to help develop and glue together the different components of a software project.

Shop Floor Configuration

The rules used to define how Shop Floor collects data provides analysis, controls the processing and maintains unit histories

Site Minder

Universal login of 42Q

Username

The username is the SiteMinder username (or a partial string)

---