SOP-5-I-42Q-MES0106-C 42Q APK

Cirrus APK Version: MES15 Portal 1.0 Work Instruction

This Work Instruction is 42Q’s corporate standard. This document is under revision control. The latest revision is located at Intranet. Once printed it is an uncontrolled copy. All alterations to this work instruction require approval. Contact the IT Global Education and Training Department to submit suggested alterations and or updates

Table of Contents[#_9j6embi9y1hb Introduction]

[#_lud00xxmyc8s Hardware and Software Requirements]

[#_cbjukyg9qg6c Administrator Pre-Configuration]

[#_sgsry0wt8nm7 Figure 1: Initial Landing Screen]

[#_8rpfaktlhkrx Figure 2.: Administrator Password Prompt]

[#_w9c5pik3iqhk Figure 3: SFDC Host and Station ID Selection]

[#_3oedz26cwtgm Access]

[#_cj907i1v2xb1 Figure 4: View Mode Selection]

[#_j4vt2ufi3l8w Figure 5: Unit ID Selection]

[#_fne2taruud2m Figure 6: Log In]

[#_7l03rttp6qwp Figure 7: Initial Login Screen]

[#_vcyx4b8fnfxa Data Collector Mode]

[#_60v4xg7z20s3 Document Display]

[#_t5c8qkc6u2n5 Activity Log]

[#_dxv50h7gyuri Unit History]

[#_9r8i9ezihyrn Figure 11: Command Execution in the Unit History Tab]

[#_hnjf1pbd91i2 PCB Mode]

[#_z0nqndr7sjwv Document Revision History]Introduction

Android Application Package (APK) is the format for installation and distribution of application software implemented by Android’s operating system. 42Q’s MES development team has provided a mobile data collection solution that allows for manufacturing execution at the shop floor level through the use of convenient tablets. These inexpensive tablets provide mobility, flexibility, and scalability to increase productivity while decreasing overhead costs.

Access control is vital when providing mobile data collection to multiple end users. AppGarden, Android Package Maintenance, and Android Device Maintenance limit the applications that end users can access via mobile devices. Every tablet should have AppGarden installed. App Garden is an Android management tool that allows installation and updates on android mobile devices. Android Package Maintenance, available through 42Q.com, serves as a repository for Android tablet applications. Android Device Maintenance, available in the portal, is the primary module for managing the tablets to which the package maintenance applications are pushed.

Prior to release, the tablets will be configured by an administrator. For more information on how to configure the tablet’s SFDC Host, Station ID, or Unit ID, please refer to the MES Wiki documentation located at http://hsvmeswiki.42Q.com/mes_wiki/index.php/Cirrus#Categories.

Hardware and Software Requirements

Minimum Hardware Requirements:

WiFi:Built-in wi-fi module which supports IEEE 802.11b/g wireless networkAC Power Adapter: 100240V input, 9V/1500mA output Audio: built-in stereo speakers(2pcs x 1W), built-in microphone 

Minimum Software Requirements:

Operating System: Android 4.2.2Bundled package:AppGardenCirrus APK

CPU: A20 ARM Cortex-A7 Dual-Core

RAM: DDR2 512MB Storage: Built-in flash internal 2GB; support external TF card (maximum 32GB) 

Accessories:

Power Adaptor

USB 2.0 3-Port Hub with Ethernet Adapter (Optional)

USB Cable Connector (Optional)

Mounting Bracket (Optional)

Symbol USB Barcode Scanner (LS2208) (Optional)

Administrator Pre-Configuration

1. On the initial landing page, select the Settings button to display a password prompt.

Figure 1: Initial Landing Screen

[[Image:]]

Figure 2.: Administrator Password Prompt

[[Image:]]

1. Enter the Administrator password and select OK.
2. To proceed with setup, enter an SFDC host in the entry field and select the Reloading button.

Figure 3: SFDC Host and Station ID Selection

[[Image:]].

Once a successful connection has been made, the Station ID may be selected and the appropriate Unit IDs will be populated.

NOTE: APK versions 1.12 and below do not support DNS in the SFDC Host field.

NOTE: The Cirrus APK uses a built-in keyboard for ease of use, however for some Android versions it may be helpful to disable the default keyboard to avoid conflict.

Access

Once the Administrator has launched the Cirrus application and entered the SFDC Host and Station ID, the user can select a default view mode and Unit ID.

The following View Modes available to the user:

• Data Collector
• PCB Work Order
• Work Instruction
• Scan Activity
• Unit History

NOTE: The View Mode selection dictates the default view upon logging in. All other view modes are available (unless PCB Work Order is selected) in tabs from the Data Collector screen.

1. To log into the mobile Data Collector, select a View Mode from the drop down list provided.

Figure 4: View Mode Selection

[[Image:]]

1. Select a Unit ID from the list provided.(The Unit ID list is created from the Device Maintenance portlet in Cirrus)

Figure 5: Unit ID Selection

[[Image:]]

1. Select Go to log in to the mobile Data Collector.

Figure 6: Log In

[[Image:]]

1. The initial login screen prompts the user for an Employee Number.

Figure 7: Initial Login Screen

[[Image:]]

1. Once an Employee Number is entered/scanned, the default view mode will display.

Data Collector Mode

If Data Collector was selected as the default view mode, the following screen will display after entering an Employee Number:

Figure 8: Data Collector Default View Mode

[[Image:]][[Image:]]

All other view modes are available from tabs located at the top of the screen.

Figure 9: Additional Tabs

[[Image:]]

Document Display

If Work Instruction was selected as the default view mode, the screen will either display the default deviation, or the last uploaded document for the Part Number at that Process.

Figure 10: Document Display

[[Image:]]

The following navigational controls are provided on the left of the screen:

[[Image:]]

If multiple documents are uploaded for the serial’s Part Number and Process, they can be accessed by closing the current document, and then selecting the document icon in the input field at the bottom of the screen. All documents mapped to the scanned part number and process will display in a list for selection.

Figure 8: Multiple Document View

[[Image:]]

Activity Log

If Scan Activity was selected as the default view mode, the following screen will display after entering an Employee Number:

Figure 9: Scan Activity View

[[Image:]]

Unit History

If Unit History was selected as the default view mode, the following screen will display after entering an Employee Number:

Figure 10: Default Unit History View

[[Image:]]

NOTE: Currently, local and custom commands can be executed in the mobile data collector. Any action executed will display in the Unit History report tab.

Figure 11: Command Execution in the Unit History Tab

[[Image:]]

PCB Mode

The PCB Work Order mode is a customer specific tool that allows for non-serialized batch processing by interfacing with Inplan-ERP. For more information, please refer to the Oracle-MES Shopfloor for PCB documentation.

Document Revision History

Date	Author	Title	Version	Change Reference
11/17/15	Ashley Martin	Technical Writer	V 1.0	This is the first revision of Cirrus APK User’s Guide
04/03/15	Elaine Fonaro	Technical Writer	V 1.0	Update Oracle occurrences to ERP
04/28/16	Elaine Fonaro	Technical Writer	V 1.0	Converted to 42Q
10/5/16	Martha Jordan	Technical Writer	V 1.0	Upgraded Image in Figure 2.