SOP-MES0036 Generic Attribute Maintenance
This edition applies to MES15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.
Contents
Introduction
This edition applies to MES 15 Portal 1.0 Application and all subsequent releases and modifications until otherwise indicated in new revisions.
Administrative privileges for the Cirrus portal are located in the Administration menu heading. With the portal, Administrators are able to access privileges from one convenient location. Privileges include User Maintenance, Plant Maintenance, Site Maintenance, Profile Maintenance, and Generic Attribute Maintenance. Also located in the Administration menu heading are SFDC Administrator, Document Control, PTS Administrator, and LE Administration.
This work instruction is intended to guide administrators on how to manage and maintain the Cirrus Portal, as well as to provide specific user groups a common sense of portal operation.
To access any of the Administration functionalities, the user must sign into the Cirrus Portal and then select the Administration expandable heading located in the menu on the left of the screen.
Figure 1: User Sign-In
Figure 2: Cirrus Welcome
Generic Attributes Maintenance
The Generic Attributes module allows users to set parameters that will be used at specific MDS modules as described below.
To access the Generic Attribute Maintenance page, navigate to Administration > Generic Attribute Maintenance.
Figure 3: Generic Attribute Maintenance Main Page
The main screen displays all defined generic attributes.
Filter Generic Attributes
The user can filter the results by Table and Attribute Name.
1. Enter the Table or Attribute Name in the appropriate field.
2. Select Filter to filter results or Clear to clear the filter fields.
(NOTE: The user can sort the columns alphabetically by clicking on the Table, Attribute Name or Value fields.)
Figure 4: Filter Results
Add Generic Attribute
1. To add a Generic Attribute, select Add Generic Attribute located above the generic attribute list.
2. The Generic Attribute Form is displayed:
Figure 5: Add Generic Attribute
3. Select a Table and Attribute Name from the drop-down boxes in the form.
4. Enter a value in the Value field.
5. Select Save to confirm, Reset to clear fields, orCancel to exit the form.
Editing Generic Attribute
1. To edit a Generic Attribute, select Edit Generic Attribute located above the list of Generic Attributes.
2. The Generic Attribute Form is displayed:
Figure 6: Edit Generic Attribute
NOTE: The user is only able to edit the attribute value. The other fields are not available to be edited.
Generic Attributes Descriptions
See below for Generic Attributes descriptions:
A
add_log_incomplete_container
Table: Project
Description: set if is allowed to log some reason/information when an incomplete container is closing.
Default Value: the default value is NO.
Module: this generic attribute is used in the Muli-Level Containerization module.
Functionality: containerization
System Configuration: NO
| ato_so_order_number |
Table: shop_order
Description: ato_so_order_number
Default Value: FALSE
Module: N/A
Functionality: N/A
System Configuration: N/A
C
ctr_export_ftp_dir
Table: Project
Description: it is the directory where the exported container file will be stored.
Default Value: N/A
Module: this generic attribute is used in the Multi-Level Containerization Browser.
Functionality: this generic attribute is used in the Export Container and Export Filtered Containers.
System Configuration: N/A
ctr_export_ftp_password
Table: Project
Description: it is the password authentication to access the server where the exported container file will be stored. Multi-Level
Default Value: N/A
Module: this generic attribute is used in the Multi-Level Containerization Browser
Functionality: export Container and Export Filtered Containers
System Configuration: N/A
ctr_export_ftp_server
Table: Project
Description: it is the server address where the exported container file will be stored.
Default Value:
Module: this generic attribute is used in the Multi-Level Containerization Browser
Functionality: export container and export filtered Containers
System Configuration: N/A
ctr_export_ftp_user
Table: Project
| Description: it is the user authentication to access the server where the exported container file will be stored. |
Default Value: N/A
Module: this generic attribute is used in the Multi-Level Containerization Browser
Functionality: export container and export filtered containers
System Configuration: N/A
customer_part_number
Table: shop_order
Description: 150512
Default Value: FALSE
Module: N/A
Functionality: N/A
System Configuration: N/A
D
define_usl_on_release
Table: Project
Description: set if is allowed to define the Unit Started Location to the serials when release Shop Order.
Default Value: N/A
Module: this generic attribute is used in the "Shop Order Release"
Functionality: N/A
System Configuration: N/A
F
| frus_child_ctr_export |
Table: Project
Description: N/A
Default Value: YES
Module: N/A
Functionality: N/A
System Configuration: N/A
K
kit_complete
Table: Project
Description: it forces the user to do the kit with all Top Level Assemblies at the same time.
Default Value: NO
Module: this generic attribute is used in the Kit Verify
Functionality: kit consolidation
System Configuration: NO
kit_genband_enabled
Table: Project
| Description: set if is possible work in Kit verify modules with GenBand project. |
Default Value: NO
| Module: this generic attribute is used in the Kit Verify |
Functionality: kit verify functionalities (Kit Consolidation/Work)
System Configuration: NO
kit_genband_files_path
Table: Project
Description: it is the path of the folder where is stored the genband files.
Default Value: N/A
| Module: this generic attribute is used in the Kit Verify |
Functionality: kit verify functionalities (Kit Consolidation/Work)
System Configuration: N/A
L
| label_engine_context |
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the SO / Container
Functionality: print label
System Configuration: TRUE
| label_engine_MDS_active |
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the SO / Container
Functionality: print label
System Configuration: TRUE
| label_engine_port |
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the SO / Container
Functionality: print label
System Configuration: TRUE
| label_engine_server |
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the SO / Container
Functionality: print label
System Configuration: TRUE
label_engine_token_JMDS
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the SO / Container
Functionality: print label
System Configuration: TRUE
| label_engine_token_SFDC |
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the SO / Container
Functionality: print label
System Configuration: TRUE
labor_tracking_database_name
Table: Project
Description: Labor Tracking modules access a PostgresSQL database, and then jMDS needs to know which database access.
Default Value: N/A
Module: this generic attribute is used in the Labor Tracking Maintenance
Functionality: to have access to all Labor Tracking functionalities
System Configuration: N/A
labor_tracking_password
Table: Project
Description: It is the password to access Labor Tracking database.
Default Value: N/A
Module: this generic attribute is used in the Labor Tracking Maintenance
Functionality: To have access to all Labor Tracking functionalities
System Configuration: N/A
labor_tracking_port
Table: Project
Description: it is the number of the Labor Tracking server port.
Default Value: N/A
Module: this generic attribute is used in the Labor Tracking Maintenance
Functionality: to have access to all Labor Tracking functionalities
System Configuration: N/A
labor_tracking_server
Table: Project
Description: it is the Labor Tracking database server address.
Default Value: N/A
Module: this generic attribute is used in the Labor Tracking Maintenance
Functionality: To have access to all Labor Tracking functionalities
System Configuration: N/A
labor_tracking_user
Table: Project
Description: it is the user to access Labor Tracking database.
Default Value: N/A
Module: this generic attribute is used in the Labor Tracking Maintenance
Functionality: To have access to all Labor Tracking functionalities
System Configuration: N/A
N
| next_sokey |
Table: shop_order
Description: 695770
Default Value: FALSE
Module: this generic attribute is used in the Shop Order
Functionality: N/A
System Configuration: N/A
O
order_line_qty_chk_warning
Table: Project
Description: set if the Sales Order Line quantity of units assigned can exceed or not.
Default Value: N/A
Module: N/A
Functionality: N/A
System Configuration: N/A
original_part_number
Table: shop_order
Description: 150512
Default Value: FALSE
Module: N/A
Functionality: N/A
System Configuration: N/A
P
part_bom_description_column
Table: Project
Description: it’s the position of the column into the file used to load a BOM for a Part Number, which have the Part Number Description information (this position starts in 1), and in the mask field (attr_data) should be informed the name header of this column.
Default Value: 3, FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: To load a BOM structure for the Part Number.
System Configuration: N/A
part_bom_part_number_column
Table: Project
Description: it’s the position of the column into the file used to load a BOM for a Part Number, which have the Part Number Description information (the position starts in 1), and in the mask field (attr_data) should be informed the name header of this column.
Default Value: 2, FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: To load a BOM structure for the Part Number
System Configuration: N/A
part_bom_quantity_column
Table: Project
Description: it’s the position of the column into the file used to load a BOM for a Part Number, which have the item quantity information (the position starts in 1), and in the mask field (attr_data) should be informed the name header of this column.
Default Value: 6, FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: To load a BOM structure for the Part Number
System Configuration: N/A
part_bom_reference_designator_column
Table: Project
Description: it’s the position of the column into the file used to load a BOM for a Part Number, which have the Reference Designator information to the item (this position starts in 1), and in the mask field(attr_data) should be informed the name header of this column.
Default Value: 7. FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: To load a BOM structure for the Part Number
System Configuration: N/A
part_bom_revision_column
Table: Project
Description: it’s the position of the column into the file used to load a BOM for a Part Number, which have the Revision information of the item (this position starts in 1), and in the mask field attr_data) should be informed the name header of this column.
Default Value: 4, FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: To load a BOM structure for the Part Number
System Configuration: N/A
part_opportunities_joint_errors_column
Table: Project
Description: it’s the position of the column into the file used to load Defect Opportunities for a Part Number, which have the Joint Errors information of the Reference Designator for the item (this position starts in 1), and in the mask field(attr_data) should be informed the name header of this column.
Default Value: 7, FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: to load Defect Opportunities for the Part Number.
System Configuration: N/A
part_opportunities_process_column
Description: it’s the position of the column into the file used to load Defect Opportunities for a Part Number, which have the Process information of the Reference Designator for the item (this position starts in 1), and in the mask field(attr_data) should be informed the name header of this column.
Default Value: 9, FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: to load Defect Opportunities for the Part Number.
System Configuration: N/A
part_opportunities_reference_designator_column
Table: Project
Description: it’s the position of the column into the file used to load Defect Opportunities for a Part Number, which have Reference Designator for the item (this position starts in 1), and in the mask field (attr_data) should be informed the name header of this column
Default Value: 4, FALSE
Module: this generic attribute is used in the Part Number Maintenance
Functionality: to load Defect Opportunities for the Part Number.
System Configuration: N/A
print_current_released
Table: Project
Description: set if is allowed to print the currently released Serial Number or all released
Default Value: YES
Module: this generic attribute is used in the Shop Order
Functionality: release – export serials to a file
System Configuration: N/A
print_label_log_on
Table: Project
Description: N/A
Default Value: NO
Module: N/A
Functionality: print label (labelfmt_v3_buffer)
System Configuration: FALSE
| print_label_log_verbose |
Table: Project
Description: N/A
Default Value: NO
Module: N/A
Functionality: print label (labelfmt_v3_buffer)
System Configuration: FALSE
Q
quantity
Table: Project
Description: N/A
Default Value: FALSE
Module: this generic attribute is used in the SFDC GUI
Functionality: configure Record and repair defects
System Configuration: N/A
R
recursive_ctr_export
Table: Project
Description: Set if will be exported only units inside the first level of the Container or all the units inside the Containers child will be exported too.
Default Value: NO
Module: this generic attribute is used in the Containerization Browse
Functionality: export container and export filtered containers
System Configuration: FALSE
reference_designator
Table: Project
Description: N/A
Default Value: TRUE
Module: this generic attribute is used in the SFDC GUI
Functionality: configure Record and repair defects
System Configuration: N/A
| release_sn_block_delay |
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the
Functionality: N/A
System Configuration: TRUE
| release_sn_block_size |
Table: Project
Description: N/A
Default Value: N/A
Module: this generic attribute is used in the
Functionality: N/A
System Configuration: FALSE
| remove_on_hold_log |
Table: Project
Description: set if when a rule is removed from the Hold is forced to log it.
Default Value: NO
Module: this generic attribute is used in the Mfg Hold
Functionality: Release a hold
System Configuration: FALSE
repair_code
Table: Project
Description: N/A
Default Value: FALSE
Module: this generic attribute is used in the SFDC GUI
Functionality: configure Record and repair defects
System Configuration: N/A
| revision_controlled |
Table: Project
Description: N/A
Default Value: 1
Module: this generic attribute is used in the Shop Order
Functionality: info
System Configuration: TRUE
S
so_control_help_link
Table: Project
Description: it is the link to Shop Order Control Usage page
Default Value: N/A
Module: this generic attribute is used in the Shop Order Release/Browser
Functionality: help area inside Shop Order Browse main screen and also inside Shop Order View screen
System Configuration: TRUE
| so_linkage_active |
Table: Project
Description: set if is allowed to link Shop Orders
Default Value: YES
Module: this generic attribute is used in the Shop Order Release/Browser
Functionality: release moment and Shop Order View screen
System Configuration: TRUE
| soms_mes_web_address |
Table: Project
Description: N/A
Default Value: NO
Module: this generic attribute is used in the Shop Oder
Functionality: SO Linkage
System Configuration: SO Linkage
| spcparam_putonhold_available |
Table: Project
Description: set if skeleton units must be created or not
Default Value: N/A
Module: N/A
Functionality: N/A
System Configuration: N/A
T
| traceability_warning |
Table: Project
Description: N/A
Default Value: YES
Module: this generic attribute is used in the Shop Order
Functionality: traceability check;
System Configuration: N/A
U
| update_pts_data |
Table: Project
Description: N/A
Default Value: NO
Module: this generic attribute is used in the SIT
Functionality: SIT Range maintenance
System Configuration: N/A
Document Revision History
| Date | Author | Title | Version | Change Reference |
| 02/14/14 | Elaine Fonaro | Technical Writer | v 1.0 | This is the first revision of Generic Attribute User Guide. |
| 02/14/14 | Ashley Martin | Technical Writer | v 1.0 | General Review and New Images |
| 02/24/14 | Elaine Fonaro | Technical Writer | v 1.0 | Formatting for WIKI |
