Difference between revisions of "SOP-42Q-MES0055 MESWeb Reports"

From 42Q
Jump to navigation Jump to search
Line 1,096: Line 1,096:
 
 
 
 
  
= <span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report">Location Activity Report</span></span> =
+
 
 +
= <span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report"><span class="mw-headline" id="Location_Activity_Report">Location Activity Report</span></span></span></span></span></span></span></span> =
  
 
The '''Location Activity Report''' provides users a list of locations that had any activity recorded (e.g. when a unit is scanned and passed to another location).
 
The '''Location Activity Report''' provides users a list of locations that had any activity recorded (e.g. when a unit is scanned and passed to another location).
Line 1,105: Line 1,106:
  
 
[[File:MW R Location Activity Report.png|MW R Location Activity Report.png]]
 
[[File:MW R Location Activity Report.png|MW R Location Activity Report.png]]
 
&nbsp;
 
 
&nbsp;
 
  
 
&nbsp;
 
&nbsp;
Line 1,115: Line 1,112:
 
#Set the date range to search for location activities within that date range The date range limit is 90 days.  
 
#Set the date range to search for location activities within that date range The date range limit is 90 days.  
 
#Click on the '''Go''' button. A list of locations containing assigned processes, counters of pass to, and counters of activity.  
 
#Click on the '''Go''' button. A list of locations containing assigned processes, counters of pass to, and counters of activity.  
 +
 +
'''<u>Note:</u> Pass to Count''' is how many units passed from that location, and the '''Activity Count''' is how many activities were recorded at that location (quantity of attributes or commands that are entered). The report only provides the list of locations that have ‘'''Pass to Count'''’ or '''Activity Count''' values greater than 0. &nbsp;
  
 
&nbsp;
 
&nbsp;
  
'''<u>Note:</u> ''''''Pass to Count''' is how many units passed from that location, and the '''Activity Count''' is how many activities were recorded at that location (quantity of attributes or commands that are entered). The report only provides the list of locations that have ‘'''Pass to Count'''’ or '''Activity Count''' values greater than 0. &nbsp;
+
'''Figure 63: Location Activity Report generated'''
 +
 
 +
[[File:MW R Location Activity Report Generated.png|700px|MW R Location Activity Report Generated.png]]
  
 
&nbsp;
 
&nbsp;
  
'''Figure 63: Location Activity Report generated'''
+
= <span class="mw-headline" id="Customer_Active_User_Report"><span class="mw-headline" id="Customer_Active_User_Report"><span class="mw-headline" id="Customer_Active_User_Report">Customer Active User Report</span></span></span> =
 +
 
 +
The'''Customer Active User Report '''allows the extraction of active billable users who logged into the 42Q system. The report also provides users with the total billable user count. A billable user is the one who is assigned to a billable profile or is assigned to a non-billable profile but has access to reports other than'''Unit History Reports'''.
  
----
+
To access this report navigate to '''Reporting > MESWeb > Activity Reports > Customer Active User Report'''
  
 
&nbsp;
 
&nbsp;
 +
 +
'''Figure 64: Customer Active User Report'''
 +
 +
'''[[File:MW R Customer Active User Report.png|MW R Customer Active User Report.png]]'''
  
 
&nbsp;
 
&nbsp;
  
&nbsp;
+
#Select a data source.
 +
#Select a Client-Server.
 +
#Select an Iportal Site.
 +
#Select a MESWeb Application.
 +
#Profile (Optional) allows users to filter reports by different profiles.
 +
#Set the date range to search for which the report should be generated. The date range limit is 31 days.
 +
#Check the option User is billable if they have a login activity (Optional) if you want to show the users who had login activity within the date range selected.
 +
#Click on the Go button. A list of all the active users with the login date in the selected date range will be displayed. The last row of the report shows the count of total billable users.
 +
 
 +
'''Figure 65: Customer Active User-generated'''
  
&nbsp;
+
[[File:MW R Customer Active User-gernerated.png|700px|MW R Customer Active User-gernerated.png]]
  
 
= <span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History">Document Revision History</span></span></span></span></span></span> =
 
= <span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History"><span class="mw-headline" id="Document_Revision_History">Document Revision History</span></span></span></span></span></span> =

Revision as of 21:15, 15 March 2021

42Q Home > Reporting > MESWeb Reports
RTENOTITLE


 

 

Reporting
MESWeb Execution
Version 42Q
Work Instruction

 

This Work Instruction is 42Q's corporate standard.
 This document is under revision control. The latest revision is located on Intranet.
 Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.
 Contact the IT Global Education and Training Department to submit suggested alterations and or updates.

This edition applies to the MES15 Portal 1.0 Application and all subsequent releases and modifications until otherwise indicated in new revisions.


Introduction

MESWeb is a powerful business intelligence application designed from the ground up to simplify reporting from manufacturing execution systems and to empower end users with a streamlined and full-featured web interface. The application includes an "ad hoc report" design tool that allows users to create basic, customized reports from heterogeneous data sources.

Decentralized custom reports, redundant data, lack of formal security controls, and convoluted development requirements are problems faced by all plants, and MESWeb has been designed to resolve these issues while maximizing usability and performance.

Business Benefits:

MESWeb provides access to technical information about MES through a real-time reporting database to avoid negatively-impacting production system performance by eliminating the need for an ODBC connection. In its standard configuration, some of the reports based on MES include the following, while new reports continue to be created:

  • Work in Process (WIP Distribution)
  • Yield, Defect, and Repair analysis
  • Serial Number historical details (Unit History)
  • Evolution Reports (including moving averages) – Top Defect Evolution and Yield Evolution
  • Throughput information

These reports have the ability to filter and search data for common attributes such as Customer, Part Number, Process, Date and Time range, Shifts, Evolution Intervals, etc. These default reports provide a significant level of visibility to manufacturing processes.

Extensibility:

MESWeb is also the strategic platform for all MES reporting needs and it can be used with any system since the following databases are available:

  • ERP
  • Postgres
  • MySQL
  • SQL Server 2000-2005
  • ODBC

Access Level

MESWeb has five distinct access levels:

  • Administrator (System Administrator)
  • Security Manager (Local Administrator)
  • Report Manager
  • Data Source Manager
  • User (Execution Module only) Section Name

Administrator (System Administrator)

The System Administrator has full access to MESWeb Central and Execution – all plants, all reports, all customers. Basically, Administrator access includes the capabilities of all of the levels (Security Manager, Report Manager, and Data Source Manager). This access will be given to BSAs and global support personnel. An administrator can perform the following functions:

  • Access the "Access Control" module
  • Create, Edit, and Delete Locations
  • Create, Edit, and Delete Data Sources
  • Create, Edit, and Delete Data Source types
  • Create new custom reports globally
  • Copy, Edit, and Delete existing custom reports globally
  • Publish custom reports globally
  • Manage permissions for all MESWeb locations

Security Manager (Local Administrator)

The Security Manager has full access to the plant(s) where he/she has been designated as local Administrator for the MESWeb tool. The main responsibilities of this role are to organize permissions and manage customers. A Security Manager is able to:

  • Visualize the Central MESWeb module in the MES Portal
  • Access the "Access Control" module
  • Grant permissions to him/herself and others from the Security Manager level to all lower levels
  • Manage customers (add customers and map part numbers to them)

Report Manager

The Report Manager has access to "Reports" and "Report Groups" modules in the specific location(s) where he/she was designed as Report Manager. Inside those modules, a Report Manager is able to:

  • Create custom reports and publish them only in his/her location
  • Edit or Delete existing customer reports in his/her location

Note: Deleting is not possible if the report is published elsewhere

  • Create Report Groups
  • Add Reports to Report Groups

Data Source Manager

The Data Source Manager is responsible for creating and updating Data Sources and Data Source types.

A Data Source Manager is able to:

  • Create, Edit, and Delete Data Sources
  • Create, Edit, and Delete Data Source types

User (Execution Module only) Section Name

The User role is able to execute only those reports specifically granted access to him/her, and may not create new reports or modify existing reports. Administrators may restrict user access only to data belonging to specific customers and data sources.

Getting Started with MESWeb Reports

MESWeb has been designed to be easy to use. The process of executing a MESWeb Report involves following only a few simple steps. Instructions for these steps may currently be found in two locations: (1) the MES Wiki (navigate to Reporting >

MESWeb) on the respective pages for each report, and (2) the MESWeb Report page (accessible via the MES Portal). Users who wish to read instructions for one or more specific reports are referred to the two aforementioned locations. Items that are important to the general use of MESWeb Reports are reviewed here.

 

 

Accessing MESWeb Reports

To access the MESWeb Reports page, users must have access to the 42Q Portal. Once logged in, users must navigate to Reporting > MESWeb. The user is directed to the MESWeb Reports page. At this point the user's web browser should be displaying content similar to that seen in Figure 1.

Figure 1: Accessing MESWeb Reports

RTENOTITLE


Users can access MESWeb Reports from this page by selecting Reports and navigating either to Default Reports or to SOMS. Figures 2 and 3 show a listing of the pages where users can generate the respective reports.

Figure 2: Default Reports

RTENOTITLE


Figure 3: SOMS Reports

RTENOTITLE

 

Figure 4 shows the appearance of a typical Report page in MESWeb. (Note that the instructions are provided in the window on the right-hand side of the page, whereas all user actions are performed in the window on the left-hand side of the page).

Figure 4: Report Page

RTENOTITLE

 

Parameters

MESWeb has a collection of parameters highly configurable by the user to help filter the information.

Dropdown list

This manages a list where only one single option is selected (see Figure 5 for an example).

Figure 5: Dropdown List

MESWebExec05.png

Checkbox

A checkbox is used for true/false parameters (see Figure 6 for an example).

Figure 6: Checkbox

RTENOTITLE

Radio Buttons

Radio buttons allow the user to select one (1) option from the list (see Figure 7). Every selectable option is mutually exclusive. This also can be used for showing different parameters.

Figure 7: Radio Button

RTENOTITLE

Date

A date parameter is used to select a specific date. There is a variant that also allows the user to select a time.

Figure 8: Date

MESWebExec08.png

Date Range

Date range is a parameter that allows the user to select a range between two dates. There is a variant that also allows the user to select a time.

Figure 9: Date Range

RTENOTITLE

Listbox

In a Listbox, multiple options can be selected (i.e., users can select every option in the "Available" list). Users can filter options by using the radio buttons "Starts With", "Contains", and "Ends With". After the user selects the necessary option, he/she enters text into the text box and then must select the RTENOTITLE icon to refresh the list.

The RTENOTITLE (highlighted down-arrow) icon moves all of the options in the "Available" list to the "Selected" list.

The RTENOTITLE (down-arrow) icon moves only the selected option in the "Available" list to the "Selected" list.

The RTENOTITLE (up-arrow) icon moves only the selected option in the "Selected" list back into the "Available" list, thus removing it from the "Selected" list.

The RTENOTITLE (highlighted up-arrow) icon moves all of the options in the "Selected" list back to the "Available" list, thus removing all options from the "Selected" list.

Figure 10: Listbox

RTENOTITLE

Multi-Line Text Box

The multi-line text box allows the user to add lines as necessary.

Figure 11: Multi-Line Text Box

MESWebExec11.png

Steps

Steps mainly work as filters that are used to execute reports. A step contains x parameters and it may or may not be the parent of another subsequent step. For example, after the user selects a Customer, the Part Numbers related to the selected Customer are shown.

Results

Grids

Once a report is executed, a grid with the results will appear on the right side.

Figure 12: Grids

RTENOTITLE

Selected Parameters

Selected parameters also appear down the side. These results contain other useful information such as the Application, the Execution Date, and the Execution Time.

Figure 13: Selected Parameters

RTENOTITLE

Actions

There are three principal actions that can be done with the report s results: Print, Export, and Share. 

 

Print

This option allows the user to print the report.

Figure 14: Print Reports

RTENOTITLE

After selecting Print, a dialog box appears. Select Print to display the report’s results.

Figure 15: Print Result

RTENOTITLE

 

 

 

Export

The Export button downloads a file to the user's PC. 

Figure 16: Export Report

RTENOTITLE

 

The report can be saved in several formats, according to the user needs Excel, XML, CSV, text and now it can also be saved in Google Sheet.

Flow the steps below to export to google sheet:

Step 1: Select the Google Sheet option in the drop-down menu:

Figure 17: Export Report

RTENOTITLE

 

Step 2: Configure the Google permissions selecting the correct option:

Figure 18: Export Report

RTENOTITLE

 

Step 3: A message will be displayed when the configuration is done:

Figure 19: Export Report

RTENOTITLE

 

Step 4: See the report exported in the selected format:

Figure 20: Export Report

Exportstep4.png

 

 

 

Share

This option is used to share the report's results. The user can share the report via Email or as a Link.

Figure 21: Share Report Result

RTENOTITLE

 

Drilldowns

Drilldowns occur when a link is selected by the user in order to drill down or further expand the data. To access Drilldown reports, select the parent link. This report will generate another report using a parameter passed by the selected link from the first report. This second report will use the default configuration (i.e., WEB format and pagination) to generate the data. WIP serials, a default report that shows the serial numbers and other information, has a Drilldown to Unit History. Drilldowns can be identified by their format; they are all underscored.

Figure 22: Drilldown Reports

RTENOTITLE

 

Tools

Snap Shots

This tool allows the user to create Snap Shots of a report with the Selected Parameters displaying a certain time. These Snap Shots can be configured to run on a schedule.

Figure 23: Snapshot

RTENOTITLE

 

Schedules

Schedules allow the user to create a task that will execute the report with the saved parameters from a Snap Shot.

Follow the steps below to create a Schedule:

1. Select the configuration icon in the top right corner of the page

2. Select Snap Shots within the list menu to open the Snap Shots window

Figure 24: SnapShot Schedule

RTENOTITLE

3. Select the plus-sign icon to the left of the SnapShot to expand.

4. Select the plus-sign icon to the far right on the schedule bar to open the General Information form.

Figure 25: Snap Shot Additional Information

RTENOTITLE

The General Information form appears where the user can enter specific information, such as Name, Time Zone, and Frequency, about the schedule (see Figure 22).

The Frequency section allows the user to establish the timing settings for running a report.  

Figure 26: General Information

MESWebExec22.png

The Duration section allows the user to set a date range for execution. The user can also select how he/she would like the report to be delivered by choosing from the available options within the Delivery options section.

Figure 27: Duration and Delivery Options

MESWebExec23.png

In the example above, the report will be delivered via email in Excel format.

Figure 28: Sending

MESWebExec24.png

This form is shown when users select Email on Delivery Options.

Figure 29: Sending via FTP Server

MESWebExec25.png

Once the FTP information has been entered and setup, the user can Save, Cancel, or Delete the scheduled report.

Most Viewed

MESWeb automatically saves the most viewed reports. These reports can be found within the Most Viewed group.

Figure 30: Most Viewed

RTENOTITLE

 

Favorites

Every report has a star on the header that allows to user to save reports on the Favorites group.

Figure 31: Favorites

RTENOTITLE

 

Predefined Reports

Predefined Reports are reports that cannot be changed in the Report Builder. These reports have more complex functions and are more complete. They can also be viewed graphically.

Sometimes, the user can see sub-reports in a Predefined Report. The most common Predefined Report is the Unit History Report, which allows the user to query data from multiple tables.

 

Default Reports

Custom Reports

Custom Reports is a categorization of report types that users can create. Custom reports perform that function of default reports and allow users to be more specific and narrow in their searches within the application. 


See the steps below the steps to generate a Custom Report by Serial Number:  

  1. Select a data source.
  2. Insert a serial number.
  3. (Optional) Select a plant.
  4. (Optional) Select a year. 
  5. (Optional) Select a month. 
    1. Select whether or not parameters should be hidden when the report is executed.
    2. (Optional) Select the interval to refresh the report as needed.

 

The report result is:

 

Figure 32: Report 1 - Material on Board S3 

MESWebReport1.png

MESWebReport1(1).png

Note: This report will be able to use the serial number for finding its use in all of the materials from PTSR and Fujitrax databases, and show its scan board data and material information.


See the steps below the steps to generate a Custom Report by Date Period:  

  1. Select a data source.
  2. Insert a serial number.
  3. (Optional) Select a plant.
  4. (Optional) Select a year. 
  5. (Optional) Select a month. 
    1. Select whether or not parameters should be hidden when the report is executed.
    2. (Optional) Select the interval to refresh the report as needed.

 

The report result is:

Figure 33: Report 2 - Material Where Used S3

MESWebReport2.png

MESWebReport2(1).png

Note: This report will be able to use a scanning date period to retrieve its serial number.

 

Shop Order Report

The Shop Order Report presents details for one or more shop orders along with all serials associated with them. It is important for users to track shop orders, and in order to do so, a user needs to be able to see the details of the units that comprise the shop order.

Follow the steps below to generate a Shop Order Report:

1. Select a Data Source

2. Enter up to 1000 Shop Order Numbers

3. Select whether or not parameters should be hidden when the report is executed

4. (Optional) Select the interval to refresh the report as needed

The report result is:

Figure 34: Shop Order Report

MESWebExec28.png

Shop Order Summary Report

The Shop Order Summary Report displays information about the part numbers, the order status, and the quantity of units in each status of a shop order.

Follow the steps below to execute the Shop Order Summary Report:

1. Select a Data Source

2. Enter up to 100 Shop Orders (only one per line)

3. Select whether or not parameters should be hidden when the report is executed

4. (Optional) Select the interval to refresh the report as needed

The report result is:

Figure 35: Shop Order Summary Report

RTENOTITLE

 

By entering one or several Shop orders this report will display information about, their part numbers, order status, and the quantity of units in each status. 

 

Top Defect Evolution Report

The Top Defect Evolution Report allows users to have a better view of defects registered in MESR for one or more products. Those defects are classified by defect name, which produces a sum (number of defects and percent defect from total) of defects found in a given range for the specific defect. This report also lists the defect total based on a range of time.

Follow the steps below to generate a Top Defect Evolution Report:

1. Select a Data Source

2. Select one or more Customers

3. Select one or more Products

4. Select one or more Processes

5. Select one or more Lines

6. Select a Pass to view

7. Select one or more Shifts

8. Set the values for the Evolution Parameter

9. Select Start Date

10. Select which field to group by first

11. (Optional) Select which field to group by the second

12. Select the type of report you want to run

13. Indicate if you would like to view graphs, and, if so, select the type

14. Select whether or not parameters should be hidden when the report is executed

15. (Optional) Select the interval to refresh the report as needed

The report result is:

Figure 36: Top Defect Evolution Report

RTENOTITLE

 

 

WIP Distribution Report

The WIP Distribution Report is designed to take the parameters specified by the user and return the number of units that are currently in WIP based on those parameters. The WIP Distribution Report can group results in several ways, depending on the user's preferences. The top level of the results offers the ability to drill down to the unit details. The WIP Distribution Report aims to give users the ability to get a snapshot of where their plant s workload is distributed.

Follow the steps below to generate a WIP Distribution Report:

1. Select a Data Source

2. Select one or more Customers

3. Select one or more Products

4. (Optional) null

5. Select one or more Departments

6. Select one or more Unit Statuses

7. (Optional) Select one or more Processes

8. Select one or more Workstations

9. Select whether or not parameters should be hidden when the report is executed

10. (Optional) Select the interval to refresh the report as needed

Figure 37: WIP Distribution Report

MESWebExec31.png

Yield & Defect Report

The purpose of the Yield & Defect Report is to give users a high-level overview of progress. It lists the total number of units with activity, pass/fail quantity, and the yield for each process that is selected (filtered by other parameters as well). From there users can see details about the most common defects for a given process as well as details about each unit.

Managers can use this information to pinpoint the areas on the floor that require their attention and discover why. To execute this report, the user must be in Execution Module, where he/she should select the Reports menu and navigate to Default Reports  Yield & Defect Report.

Follow the steps below to generate a Yield & Defect Report:

1. Select a Data Source

2. Select one or more Customers

3. Select one or more Products

4. Select one or more Processes

5. Select one or more Lines

6. Select a Pass to view

7. Select one or more Shifts

8. Select one or more Workstations

9. Enter a Date Range or select one or more Orders

10. Select a field to group by

11. (Optional) Select a second field to group by

12. Choose whether to include moving units

13. Indicate if you would like to consider "No Fault Found" as passes

14. Indicate if you would like to view graphs

15. Select whether or not parameters should be hidden when the report is executed

16. (Optional) Select the interval to refresh the report as needed

The report result is:

Figure 38: Yield & Defect Report

RTENOTITLE

Yield Evolution Report

This report displays the percentage of success of the product for a determined period (Hour/Day/Week/Month). Users can view charts of this data and have tabular data presenting the hour/date/unit/passed/yield of a product. This data is presented via "All Products".

A Drilldown report, which offers more details about the product, is available for unit/passed/failed. To execute this report, the user must be in Execution Module, where he/she should select the Reports menu and navigate to Default Reports  Yield Evolution Report.

Follow the steps below to generate a Yield Evolution Report:

1. Select a Data Source

2. Select one or more Customers

3. Select one or more Products

4. Select one or more Processes

5. Select one or more Lines

6. Select a pass to view

7. Select one or more Shifts

8. Set the values for the Evolution Parameter

9. Select Start Date

10. Select which field to group by first

11. (Optional) Select which field to group by the second

12. Choose whether to include moving units

13. Indicate if you would like to display charts

14. Select whether or not parameters should be hidden when the report is executed

15. (Optional) Select the interval to refresh the report as needed

The report result is:

Figure 39: Yield Evolution Report

RTENOTITLE

 

Yield Serials Report

The Yield Serials Report displays the following information: Serial Number, Product, Workstation where the action occurred, Serial Quantity, Date of Action, and the Action.

Follow the steps below to generate a Yield Serials Report:

1. Select a Data Source

2. Select one or more Customers

3. Select one or more Products

4. Select one or more Processes

5. (Optional) Select one or more Lines

6. Select a pass to view

7. (Optional) Select one or more Shifts

8. (Optional) Select one or more Global Processes

9. (Optional) Select one or more Workstations

10. (Optional) Filter data by a Date Range

11. (Optional) Select number of Shop Orders

12. Select one or more Actions

13. Select whether or not parameters should be hidden when the report is executed

14. (Optional) Select the interval to refresh the report as needed

The report result is:

Figure 40: Yield Serials Report

RTENOTITLE

 

Unit History Report

The Unit History Report gives detailed information about a specific unit and all its activity throughout its lifecycle. This allows users to see information about a specific unit and its activity.

Follow the steps below to generate a Unit History Report:

1. Enter up to 1000 Serials

2. Select whether or not parameters should be hidden when the report is executed

3. (Optional) Select the interval to refresh the report as needed

Figure 41: Unit History

MESWebExec35.png

 

Unit History Report now has the capability to query data from MES Archive integrated into the report. A new parameter was added to the report which allows the user to decide whether to query Archive data or only be notified when searched serials have already been archived.

New includes Archive Parameter.

Figure 42: Unit History

RTENOTITLE

 

When the report is executed with the Include Archive parameter selected, it will query Archive data for all searched serials that have been archived. Archived serials will be labeled as such, and data will be presented in the same format as regular serials. Both archived and regular serials can be searched at the same time.

A Report executed with Include Archive selected

Figure 43: Unit History

Unithistoryrep37.png

 

When the report is executed with the Include Archive parameter unselected, serials that have been archived will be labeled as such, and the user will be given the option to click the link in order to get the data from Archive. This is to prevent a longer execution time in case the user is unaware serials have been already archived.

Report executed with Include Archive unselected

Figure 44: Unit History

Unithistoryrep38.png

 

 

Unit History With Multimedia File 

Production Workbench supports Multimedia Data Collection (PDF, Imagen, and Video) and users can take photos using their computer or tablet camera and upload any multimedia file. 

This will reflect in the Unit History report, where the user is able to see the image upload for the SN.

For more information about Multimedia files, refer to  Production Workbench SOP.

 

Figure 45: Unit History with Multimedia File Attached

Unit History with Multimedia File Attached.png

 

Clicking on the image icon, the attached file will be displayed:

 

Figure 46: Expanded Image

Expanded Image.png

Select the expand icon to see just the image.

 

Figure 47: Uploaded Image Details

Uploaded Image Details.png

 

Part Order Summary Report

This report displays the following information about works orders: Part Number, Status, Quantity, and Serial Quantity. It also shows the due date, last activity, and how many days have passed before the due date.

Follow the steps below to generate a Part Order Report:

1. Select a Data Source

2. Enter up to 500 Part Numbers (one per line)

3. Select whether or not parameters should be hidden when the report is executed

4. (Optional) Select the interval to refresh the report as needed

 

Figure 48: Part Order Summary

RTENOTITLE

 

 

RTY Report

RTY shows how many activities were created by a Global Process. The report can display the results by month, week, or day.

Follow the steps below to generate an RTY Report:

1. Select a Data Source

2. Select one or more Customers

3. Select the Data Range (Start and End Dates)

4. Select whether or not parameters should be hidden when the report is executed

5. (Optional) Select the interval to refresh the report as needed

Figure 49: RTY Report

RTENOTITLE

 

 

Workstation Monitor Report

The Workstation Monitor Report shows how many units have been processed on a particular station.

Follow the steps below to generate a Workstation Monitor Report:  

1. Select a Data Source

2. Select a Customer

3. Select a Product

4. Select a Workstation

5. Select the Date and Time Range for the Shift

6. Enter the start time for the first break (format: HH:mm)

7. Enter the end time for the first break (HH:mm)

8. (Optional) Enter the start time for the second break (HH:mm)

9. (Optional) Enter the end time for the second break (HH:mm)

10. (Optional) Enter the start time for the third break (HH:mm)

11. (Optional) Enter the end time for the third break (HH:mm)

12. Enter UPH target.

13. Select whether or not parameters should be hidden when the report is executed

14. (Optional) Select the interval to refresh the report as needed

Figure 50: Workstation Monitor

RTENOTITLE

 

WIP Serials Report

The WIP (Work in Process) Serials Report displays all the serial numbers that are in production.

Follow the steps below to generate a WIP Serial Report:

1. Select a Data Source

2. Select one or more Customers

3. Select one or more Products

4. Select the order that should be used to filter the results

5. Select one or more Departments

6. Select one or more Unit Status

7. Select one or more ways to group the information

8. (Optional) Select a field to group by

9. Indicate if you would like to display charts or not

10. Select whether or not parameters should be hidden when the report is executed

11. (Optional) Select the interval to refresh the report as needed

The report result is:

Figure 51: WIP Serials

MESWebExec39.png

 

Solder Paste Status Report 

 

The Solder Paste Status Report details the status of any items with the Solder Paste inventory, specified by part and serial numbers. It shows the current status, with timestamp data.

See the steps below the steps to generate a Solder Paste Status Report

  1. Select a data source
  2. (Optional) Select a Solder Paste P/N
  3. (Optional) Select a Solder Paste S/N
  4. (Optional) Select a Solder Paste Status
  5. Select a date range
  6. Select whether or not parameters should be hidden when the report is executed.
  7. (Optional) Select the interval to refresh the report as needed.

The report result is:

Figure 52: Solder Paste Status Report Result

Solder Paste Status Report Result.png

SOMS Reports

The SOMS Global Status Report is designed to start with a high-level overview of a plant's current operating status.  The user can see the current number of units that are in the WIP, the yield for the current and previous days, and the throughput for the current and previous days for each of the plant's levels. Users also have the ability to drill down into a single level to see the same information broken out by line and process. The report is designed to give a quick snapshot of the health of a plant operation.

Follow the steps below to generate a SOMS Report:

1. Select a Data Source

2. (Optional) Enter the Mfg Line Name

3. (Optional) Enter the Scanner ID

4. (Optional) Enter the Multi-Pass Location Name

5. Select whether or not parameters should be hidden when the report is executed

6. (Optional) Select the interval to refresh the report as needed

Figure 53: SOMS Setup

RTENOTITLE

 

 

QCP Checklist

The QCP Checklist is a new functionality that allows the MESWeb users to access a set of questions and answers done previously in Production Workbench.

To enter the QCP Checklist the user must go to MESWeb>Reports>Default Reports, there, three different reports are available: QCP History, QCP Details, and QCP Serials.

 

Figure 54: QCP Default Reports

MESWebExecQCP48.png

Note: The user can access QCP History, QCP Details, and QCP Serials by selecting them.

 

 

QCP History

QCP History is divided into four steps which allow the user to see the following  parameters:

  • Step 1: Data Source
  • Step 2:QCP Name
  • Step 3: Part Number, Process, Location, Employee, Obsoletes
  • Step 4: Data range.

Note: These configurations are showing on the left side of the screen, as displayed in the following image:

 

Figure 55: QCP History Steps

MESWebExecQCP49.png

 

The parameters mentioned above allow the user to have a customized search of the QCP Checklists, all of them are optional, except for Step 1: Source andStep 4: Data Range; as shown in the image below.

The Data Range allows the user to search the previously filled/answered QCP checklists in the selected date ranges; once the user fills in the dates and time, they can click the Go button.

Figure 56: Data Range

RTENOTITLE

The QCP information will be displayed on the screen, with their respective configuration; name, version, part number, etc.

 

Figure 57: Data Range List

MESWebExecQCP51.png

This list shows the Effective Date and the Expiration Date,  it also shows the State of the QCP; this can be either Active or Expired, and the Employee ID from the user who filled the QCP checklist.

Note: The Effective Date and the Expiration Date information is associated with every Serial Number, scanned between the active period of the checklist and before it expires.

 

QCP Details

QCP Details allows the user to see and customize the information placed into the QCP checklist;  Name, Status, Employees Id, etc. It also allows the user to see the questions and their respective answers. 

The user can drill down from QCP History to QCP Details, by selecting the QCP Name in the list.

Note: The QCP Details have the same steps and the same parameters as QCP History (only the format is different).

 

Figure 58: QCP Details

MESWebExecQCP52.png

Note: The color on the sidebar, changes according to the status; Red= Expired, Green= Active

 


QCP Serials

To access the QCP Serials, the user can select the option from the QCP Details page, as displayed in the following image:

Figure 59: QCP Serials

MESWebExecQCP53.png

 

Once this option is selected, the screen will display the QCP Serials, allowing the users to see the list of serials and their respective information, Serial Number, Part Number, Process, Location QCP name, and the QCP version.

Figure 60: QCP Serials

MESWebExecQCP54.png

 

By selecting the Serial Number, shown on the image above;  the user is able to see the  Unit history.

This allows the user to see the detailed information about the Serial Numbers and all its activity throughout its lifecycle.

Figure 61: Unit History

MESWebExecQCP55.png

 


Location Activity Report

The Location Activity Report provides users a list of locations that had any activity recorded (e.g. when a unit is scanned and passed to another location).

To access this report navigate to Reporting > MESWeb > Activity Reports > Location Activity Report

Figure 62: Location Activity Report

MW R Location Activity Report.png

 

  1. Select the Mfg Line.
  2. Set the date range to search for location activities within that date range The date range limit is 90 days.
  3. Click on the Go button. A list of locations containing assigned processes, counters of pass to, and counters of activity.

Note: Pass to Count is how many units passed from that location, and the Activity Count is how many activities were recorded at that location (quantity of attributes or commands that are entered). The report only provides the list of locations that have ‘Pass to Count’ or Activity Count values greater than 0.  

 

Figure 63: Location Activity Report generated

MW R Location Activity Report Generated.png

 

Customer Active User Report

TheCustomer Active User Report allows the extraction of active billable users who logged into the 42Q system. The report also provides users with the total billable user count. A billable user is the one who is assigned to a billable profile or is assigned to a non-billable profile but has access to reports other thanUnit History Reports.

To access this report navigate to Reporting > MESWeb > Activity Reports > Customer Active User Report

 

Figure 64: Customer Active User Report

MW R Customer Active User Report.png

 

  1. Select a data source.
  2. Select a Client-Server.
  3. Select an Iportal Site.
  4. Select a MESWeb Application.
  5. Profile (Optional) allows users to filter reports by different profiles.
  6. Set the date range to search for which the report should be generated. The date range limit is 31 days.
  7. Check the option User is billable if they have a login activity (Optional) if you want to show the users who had login activity within the date range selected.
  8. Click on the Go button. A list of all the active users with the login date in the selected date range will be displayed. The last row of the report shows the count of total billable users.

Figure 65: Customer Active User-generated

MW R Customer Active User-gernerated.png

Document Revision History

Date Author Title Version Change Reference Approved by
10/28/15 Elaine Fonaro Technical Writer V1.0 Initial Version  
01/12/16 Claudia Urenda Product Owner V1.0 General Review and especially for business rules.  
01/13/16 Elaine Fonaro Technical Writer V1.0 Small changes required and new images added. Format to WIKI format.  
01/15/16 Kala Burson Technical Writer V1.0 Grammatical edits.  
04/03/16 Elaine Fonaro Technical Writer v 1.0 Updated Oracle occurrences to ERP  
04/28/16 Dane Parker Technical Writer v 1.0 Formatted to 42Q  
04/04/18 Elaine Fonaro Technical Writer v 1.0 Applied a new template for the format.   
11/08/18 Marisol Vargas Technical Writer  v.1.0 Small changes required and new images added to the Unit History Report and Export.  
04/24/20 Marisol Vargas Technical Writer v.1.0 Adding QCP configuration for reports Elizabeth Armenta
05/03/20 Fredy Serrano Product Owner v.1.0 General Review for QCP Reports added  
07/10/20 Elaine Fonaro Technical Writer v.1.0 Added the Multimedia File information for the Unit History report. Elizabeth Armenta
08/28/20 Elaine Fonaro Technical Writer v.1.0 Added the Default Report  Solder Paste Status. Kyle Wagner
01/09/20 Marisol Vargas Technical Writer V.1.0 Peer review on Default Report  Solder Paste Status  
01/12/21 Tiana H Technical Writer  v1.0 Updated the Custom Reports and updated all figure numbers to correspond. Kyle Wagner

01/15/21

Tiana H Technical Writer  v1.0 Made adjustments for Custom Reports update. Kyle Wagner
02/17/21 Alejandro Duran Technical Writer v1.0 Added Location Activity Report and Customer Active User Report Kyle Wagner