SOP-42Q-MES0004 Data Collector Maintenance

SFDC Configuration Data Collector Version MDS Portal xx-x Work Instruction

This Work Instruction is Sanmina's Corporate standard. This document is under revision control. The latest revision is located on SanminaNet. Once printed it is an uncontrolled copy. All alterations to this work instruction require approval. Contact the IT Global Education and Training Department to submit suggested alterations and or updates.

This edition applies to MDS Portal 1.0 Application and all subsequent releases and modifications until otherwise indicated in new revisions.'

Introduction

The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.

SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses barcode scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.

Data Collector Maintenance

Data Collector Maintenance provides definitions in the SFDC database to associate a Device Number to a Data Collection Location name.

1. To access the Data Collector module, click on Data Collector from the SFDC Configuration Maintenance menu. The main Data Collector List screen is displayed.

Figure 1: Data Collector List

List Data Collectors

Based on the actual SFDC Configuration, a list is displayed with all Data Collectors.

Figure 2: Data Collectors List

The Data Collectors List displays Device #, Location, Status and SFDC ID. The user is able to inactivate a Data Collector by checking the Inactive check box. Also, is able to Add, Edit, Delete and Search in Multi Pass clicking on Search Multi Pass button.

In accordance with the associated Location status, the line in the Data Collector list is displayed in the colors below:

(THIS IS A FEATURE TO BE DEVELOPED)

• Status = 20 with process name: green
• Status = 20 without process name: orange
• Status = 28 with process name: dark green
• Status = 28 without process name: dark orange
• Status = 25: red
• Status = 29: dark red
• Status = 30: blue
• Other Status: black

Note: The colors are based from configuration in the Location Maintenance module.

Data Collector definitions in the SFDC database to associate a Device Number to a Data Collection Location name.

Device Number refers to an actual Data Collector number. Data Collector Device Numbers range from 1-999.

• CS9400 Data Collectors and PCC port addressing is limited to a range from 1-320 (each PCC has 5 communication ports with up to 32 Devices per port totaling 320 devices).
• NetDC Device Numbers are limited to a range from 321-999.
• Emulators can access any Device Number from 1-999.

PCC Brd 1 Port 1 Device numbers 001-032 PCC Brd 1 Port 2 Device numbers 033-064 PCC Brd 1 Port 3 Device numbers 065-096 PCC Brd 1 Port 4 Device numbers 097-128 PCC Brd 1 Port 5 Device numbers 129-160

PCC Brd 2 Port 1 Device numbers 161-192 PCC Brd 2 Port 2 Device numbers 193-224 PCC Brd 2 Port 3 Device numbers 225-256 PCC Brd 2 Port 4 Device numbers 257-288 PCC Brd 2 Port 5 Device numbers 289-320

Filter Data Collectors

This functionality enables user to perform searches. There are four available filter fields:

• Location
• Device #
• SFDC ID
• Status: All, Inactive and/or Active

1. Enter desired filter criteria and click the Filter button to display results.

2. Click Clear button to clear filter fields.

Add Data Collectors

This functionality enables the user to add Data Collectors to the database.

1. To add Data Collectors, click the Add button in the menu.

Figure 3: Add Data Collectors – Data Collector Form

The Data Collector form is displayed:

Figure 4: Data Collector Form

2. Populate mandatory fields (indicated in Red) and click Save.

Fields description:

Device #: Refers to an actual Data Collector number. Data Collector Device Numbers range from 1-999. CS9400 Data Collectors and PCC port addressing is limited to a range from 1-320 (each PCC has 5 communication ports with up to 32 Devices per port totaling 320 devices when using two PCC’s). NetDC Device Numbers are limited to a range from 321-999. Emulators can access any Device Number from 1-999.

SFDC ID: Existing SFDC IDs within the database. Each Location record is attached to a SFDC ID. The SFDC ID is defined in Miscellaneous Configuration Maintenance.

Location Name: Select an Sxxx location from the drop-down list, where xxx is the Device Number. This is the location associating the Device Number to the Sxxx Location name. The Location name should exist prior to associating in the Data Collector Table.

Note: As a general rule, Device # 1 is assigned Location S001, Device # 2 is assigned to Location S002, etc. Also, Data Collector Locations S001 through S999 are only used to define Device Numbers, are not used in routes and never associated to a Process Name.

Inactive: To inactivate the Data Collector inactive, check the check box.

Note: The user must populate all mandatory fields (indicated in Blue) when adding new Data Collectors. If the mandatory fields are not populated, an error message is displayed.

Edit Data Collector

This functionality enables the user to edit the selected Data Collector.

1. To edit a Data Collector, select it and click the Edit button.

The Data Collector Form is displayed:

Figure 5: Data Collector List - Edit

Enter desired edits as necessary.

Updating a Device Number: Highlight the Device Number field and enter desired change;

SFDC ID: Select the desired SFDC ID by clicking on the drop-down menu;

Updating a Location: If the first 4 characters of the Location Name are known, highlight the Location field and enter desired change. If the Location Name is not known, click the drop-down menu.

2. Click Save to commit changes, or click Cancel to cancel.

Delete Data Collector

This functionally enables the user to delete the selected Data Collector.

1. To delete a Data Collector, click the Delete button for the desired Data Collector.

A confirmation message is displayed:

Figure 6: Data Collector List - Delete

2. Click Yes to confirm the delete action. Click No to cancel the delete action.

Data Collector Search in Multi Pass

This functionality enables the user to associate multiple Locations with a Data Collector. The purpose is to replace Multi Pass configuration setup from Setup Data Editor with a tabled interface and enforce unique Location to Device configuration.

1. To associate multiple Locations with a Data Collector, click the Search in Multi Pass button for the desired Data Collector.

Figure 7: Multi Pass Location

The Associate Location(s) screen is displayed:

Figure 8: Associate Location

2. Double click on the Available/Associated Locations to move to the Associated Location(s) and vice versa.

To add all Locations, click on Select All.

3. Click Save to save or click Cancel to cancel the operation.

4. Click on Reset to back to original configuration before save the information.

Print/Export Line Data Collector

This functionality prints and exports the selected Line Data Collector configuration. The report results include Net User Id, Device Number, Line and Location Name of each Data Collector. The report prints to the default printer for the workstation.

1. To print/export Line Data Collectors, click the Print/Export Line Data Collectors in the menu.

Figure 9: Print SFDC ID Data Collector

The Choose a SFDC ID window is displayed.

2. Choose the SFDC ID.

A report is generated and the user is able to save the file or print it.

Figure 10: Print/Export SFDC ID Data Collectors Report

Print/Export Filtered Data Collectors

This functionality prints and exports the Data Collectors filtered and displayed in the list. The report results include the Net User Id, Device Number, Line and Location Name of each Data Collector. The report prints to the default printer for the workstation.

1. To print/export Data Collectors, click the Print/Export Data Collectors button in the Tasks window.

Figure 11: Print/export Filtered Data Collector

A report is generated and the user is able to save the file or print it.

Figure 12: Print/Export Filtered Data Collectors Report

Appendix B

Glossary

Access Control

it is a module that will set the permissions for users and external customers of Sanmina

administrator

the System Administration has full access - all plants, all reports, all users.

component

A component is a specific piece of data that appears on a label, for example: bar code, part numbers, graphic images, line or text. Hence, label components are broken down into several different types: text, graphic images, MDS database values, or a combination of text and database values.

framework

In software development, a framework is a defined support structure in which another software project can be organized and developed. A framework may include support programs, code libraries, a scripting language, or other software to help develop and glue together the different components of a software project.

SFDC Configuration

The rules used to define how SFDC collects data, provides analysis, controls processing and maintains unit histories

Site Minder

Universal login of Sanmina

username

the username is the site minder username (or a partial string)

Document Revision History

Date	Author	Title	Version	Change Reference
08/13/13	Elaine Fonaro	Technical Writer	v 1.0	This is the first revision of MDS User’s Guide