Difference between revisions of "42Q-MES0085-C Conduit Command Appendix"

From 42Q
Jump to navigation Jump to search
Line 1: Line 1:
−
<small>[[42Q Cloud-Based MES/MOMS|42Q Home]] &gt; [[Conduit|Conduit]] &gt; Conduit Command Appendix</small> <br>[[Image:42Q logo.png|130px|Sanmina logo.png]]
 
  
−
<br>  
+
<small>[[42Q_Cloud-Based_MES/MOMS|42Q Home]] > [[Conduit|Conduit]] > Conduit Command Appendix</small><br/> [[File:42Q logo.png|130px|Sanmina logo.png]]
−
<center>'''Conduit''' </center> <center>'''Conduit Command Appendix''' </center> <center>'''Version MES15 Portal 1.10''' </center> <center>'''Work Instruction''' </center>  
+
 
−
<br>
+
&nbsp;
 +
<center>'''Conduit'''</center> <center>'''Conduit Command Appendix'''</center> <center>'''Version MES15 Portal 1.10'''</center> <center>'''Work Instruction'''</center>  
 +
&nbsp;
 
<center>This Work Instruction is 42Q's corporate standard.</center> <center>This document is under revision control. The latest revision is located on Intranet.</center> <center>Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.</center> <center>Contact the IT Global Education and Training Department to submit suggested alterations and or updates.</center>  
 
<center>This Work Instruction is 42Q's corporate standard.</center> <center>This document is under revision control. The latest revision is located on Intranet.</center> <center>Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.</center> <center>Contact the IT Global Education and Training Department to submit suggested alterations and or updates.</center>  
−
<br>
+
&nbsp;
  
−
''This edition applies to MES15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.'' <br> __TOC__  
+
''This edition applies to MES15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.''<br/> __TOC__
  
−
<br>
+
&nbsp;
  
 +
&nbsp;
  
−
= Command Appendix Registry =
+
= <span class="mw-headline" id="Command_Appendix_Registry">Command Appendix Registry</span> =
  
 
The commands defined within the Conduit Command Registry represent the core functionality of the Conduit system. Unlike with legacy systems, Conduit commands are full words, generally Pascal case (though technically command names are case insensitive.)
 
The commands defined within the Conduit Command Registry represent the core functionality of the Conduit system. Unlike with legacy systems, Conduit commands are full words, generally Pascal case (though technically command names are case insensitive.)
Line 26: Line 28:
 
&nbsp;
 
&nbsp;
  
−
== A ==
+
== '''<span class="mw-headline" id="A">A</span>''' ==
  
−
=== AddAttribute ===
+
=== '''<span class="mw-headline" id="AddAttribute">AddAttribute</span>''' ===
  
 
Add Attribute does not have an equivalent in SFDC. It is effectively the equivalent of ADCMP2 but for an attribute. It allows adding an attribute for which a definition did not already exist.
 
Add Attribute does not have an equivalent in SFDC. It is effectively the equivalent of ADCMP2 but for an attribute. It allows adding an attribute for which a definition did not already exist.
  
−
=== AddAttributeTo ===
+
=== '''<span class="mw-headline" id="AddAttributeTo">AddAttributeTo</span>''' ===
  
 
Adds an attribute to the specified unit serial number. This command will produce an error if the attribute already exists, no replacement will occur. Similar to ADCMP2 for non-tracked components in SFDC this command does not require an existing attribute definition
 
Adds an attribute to the specified unit serial number. This command will produce an error if the attribute already exists, no replacement will occur. Similar to ADCMP2 for non-tracked components in SFDC this command does not require an existing attribute definition
  
−
=== AddComment ===
+
=== '''<span class="mw-headline" id="AddComment">AddComment</span>''' ===
  
 
Adds a comment checked against an optional mask to the scanned unit. &nbsp;Add Comment is equivalent to ADCOMMENT in SFDC.
 
Adds a comment checked against an optional mask to the scanned unit. &nbsp;Add Comment is equivalent to ADCOMMENT in SFDC.
  
−
=== AddCommentTo ===
+
=== '''<span class="mw-headline" id="AddCommentTo">AddCommentTo</span>''' ===
  
 
Adds a comment checked against an optional mask to the specified unit. Equivalent to ADCOMMENT in SFDC.
 
Adds a comment checked against an optional mask to the specified unit. Equivalent to ADCOMMENT in SFDC.
  
−
=== AddDefinedAttribute ===
+
=== '''<span class="mw-headline" id="AddDefinedAttribute">AddDefinedAttribute</span>''' ===
  
 
Add Defined Attribute is equivalent to ATTADD in SFDC. Unlike SFDC it is designed to be used with the Conduit “Scanning Template” construct for units that have active / unreconciled Assembly / Attr_Def entries. AddMeasurementKey Add Measurement Key is equivalent to MEASKEY in SFDC.
 
Add Defined Attribute is equivalent to ATTADD in SFDC. Unlike SFDC it is designed to be used with the Conduit “Scanning Template” construct for units that have active / unreconciled Assembly / Attr_Def entries. AddMeasurementKey Add Measurement Key is equivalent to MEASKEY in SFDC.
  
−
=== AddMeasurementKey ===
+
=== '''<span class="mw-headline" id="AddMeasurementKey">AddMeasurementKey</span>''' ===
  
 
Adds a measurement key to the scanned unit. Equivalent to MEASKEY in SFDC.
 
Adds a measurement key to the scanned unit. Equivalent to MEASKEY in SFDC.
  
−
=== AddMeasurementKeyTo ===
+
=== '''<span class="mw-headline" id="AddMeasurementKeyTo">AddMeasurementKeyTo</span>''' ===
  
 
Adds a measurement key to the specified unit. Equivalent to MEASKEY in SFDC.
 
Adds a measurement key to the specified unit. Equivalent to MEASKEY in SFDC.
  
−
=== AddNontrackedAssemblyComponent ===
+
=== '''<span class="mw-headline" id="AddNontrackedAssemblyComponent">AddNontrackedAssemblyComponent</span>''' ===
  
 
Add Nontracked Assembly Component is a “Scanning Template” specific command for adding a non-tracked component based on an unreconciled assembly record for a unit. It is equivalent to ADCMP
 
Add Nontracked Assembly Component is a “Scanning Template” specific command for adding a non-tracked component based on an unreconciled assembly record for a unit. It is equivalent to ADCMP
  
 +
=== '''<span class="mw-headline" id="AddNontrackedComponent"><span class="mw-headline" id="AddNontrackedComponent">AddNontrackedComponent</span></span>''' ===
 +
 +
AddNontrackedComponent is very similar to ADCMP2 command in SFDC, in that an assembly record is not used. It adds the component and only updates the old component record from 'removed' to 'replaced' if it finds a removed nontracked component with the same ref_designator on the serial.
  
−
=== <span class="mw-headline" id="AddNontrackedComponent">AddNontrackedComponent</span> ===
+
=== '''<span class="mw-headline" id="AddNontrackedComponentTo"><span class="mw-headline" id="AddNontrackedComponentTo"><span class="mw-headline" id="AddNontrackedComponentTo">AddNontrackedComponentTo</span></span></span>''' ===
  
−
AddNontrackedComponent is very similar to ADCMP2 command in SFDC, in that an assembly record is not used. It adds the component and only updates the old component record from 'removed' to 'replaced' if it finds a removed nontracked component with the same ref_designator on the serial.
+
Adds a non-tracked component to the specified unit. It is exactly the same as AddNonTrackedComponent, except that it does not require a scanned unit, only a serial number.
  
 +
'''Warning: '''Using either of these '''AddNontrackedComponent/To''' commands multiple times for a given serial and ref_designator can result in multiple active components with the same ref_designator. In order to remove and replace an existing component for a serial/ref_designator, so that only one is active, you must use the '''ReplaceNontrackedComponent/To''' the version of these commands.&nbsp;
  
 +
=== '''AddToLot''' ===
  
−
=== <span class="mw-headline" id="AddNontrackedComponentTo"><span class="mw-headline" id="AddNontrackedComponentTo">AddNontrackedComponentTo</span></span> ===
+
Adds the scanned unit serial number to the specified lot.
  
−
Adds a non-tracked component to the specified unit. It is exactly the same as AddNonTrackedComponent, except that it does not require a scanned unit, only a serial number.
+
=== '''<span class="mw-headline" id="AddTrackedComponent">AddTrackedComponent</span>''' ===
  
−
&nbsp;
+
'''A''''''ddTrackedComponent '''is very similar to '''ADCMP3''' command in SFDC, in that an assembly record is not used. It adds the component and only updates the old component record from 'removed' to 'replaced' if it finds a removed tracked component with the same ref_designator on the serial.
  
−
'''Warning: '''Using either of these '''AddNontrackedComponent/To''' commands multiple times for a given serial and ref_designator can result in multiple active components with the same ref_designator. In order to remove and replace an existing component for a serial/ref_designator, so that only one is active, you must use the '''ReplaceNontrackedComponent/To''' the version of these commands.&nbsp;
+
=== '''AddTrackedComponentTo''' ===
  
−
=== AddTrackedComponent ===
+
Adds a tracked component to the specified unit. It is exactly the same as AddTrackedComponent, except that it does not require a scanned unit, only a serial number.
  
−
Add Tracked Component is equivalent to ADCMP3 in SFDC.
+
'''Warning: '''Using either of these '''AddTrackedComponent/To''' commands multiple times for a given serial and ref_designator can result in multiple active components with the same ref_designator. In order to remove and replace an existing component for a serial/ref_designator, so that only one is active, you must use the'''ReplaceTrackedComponent/To''' the version of these commands.&nbsp;
  
−
=== AddUniqueComponent ===
+
=== '''<span class="mw-headline" id="AddUniqueComponent">AddUniqueComponent</span>''' ===
  
 
Adds a non-tracked component to the specified unit. Unlike Add Non-Tracked Component this does not require a scanned unit. This command will not replace an existing unremoved component with that component id but it will mark a previously removed component as replaced.
 
Adds a non-tracked component to the specified unit. Unlike Add Non-Tracked Component this does not require a scanned unit. This command will not replace an existing unremoved component with that component id but it will mark a previously removed component as replaced.
  
−
=== AddUniqueAssemblyComponent ===
+
=== '''<span class="mw-headline" id="AddUniqueAssemblyComponent">AddUniqueAssemblyComponent</span>''' ===
  
 
Add Unique Assembly Component is the unique component version of the Scanning Template enabled ADCMP command in SFDC. AddUniqueComponent Add Unique Component has no corollary in SFDC today. It is designed to add a unique component without a predefined assembly record just like ADCMP2 (non-tracked) or ADCMP3 (tracked). AddUnitToContainer Add Unit To Container has no equivalent command in SFDC. SFDC Containerization essentially does the same thing via complicated mini-sessions executed after NEWCNTNR / OPENCNTNR.
 
Add Unique Assembly Component is the unique component version of the Scanning Template enabled ADCMP command in SFDC. AddUniqueComponent Add Unique Component has no corollary in SFDC today. It is designed to add a unique component without a predefined assembly record just like ADCMP2 (non-tracked) or ADCMP3 (tracked). AddUnitToContainer Add Unit To Container has no equivalent command in SFDC. SFDC Containerization essentially does the same thing via complicated mini-sessions executed after NEWCNTNR / OPENCNTNR.
  
−
=== AddUnitToContainer ===
+
=== '''<span class="mw-headline" id="AddUnitToContainer">AddUnitToContainer</span>''' ===
  
 
Adds provided unit serial number to the scanned container serial.
 
Adds provided unit serial number to the scanned container serial.
  
−
=== AddUnitToLot ===
+
=== '''<span class="mw-headline" id="AddUnitToLot">AddUnitToLot</span>''' ===
  
 
Add Unit To Lot has no equivalent command in SFDC. SFDC “Lotization” is handled via cumbersome sessions within NEWLOT / OPENLOT.
 
Add Unit To Lot has no equivalent command in SFDC. SFDC “Lotization” is handled via cumbersome sessions within NEWLOT / OPENLOT.
  
−
=== AdvancedShopOrderUnits ===
+
=== '''<span class="mw-headline" id="AdvancedShopOrderUnits">AdvancedShopOrderUnits</span>''' ===
  
 
Ends up to <unit limit> units for the supplied shop order number at the provided workstation. Units are chosen in FIFO order for the specified workstation. This command can be executed without a transaction unit.
 
Ends up to <unit limit> units for the supplied shop order number at the provided workstation. Units are chosen in FIFO order for the specified workstation. This command can be executed without a transaction unit.
  
−
=== ApplyMeo ===
+
=== '''<span class="mw-headline" id="ApplyMeo">ApplyMeo</span>''' ===
  
 
Apply Meo is equivalent to ADMEO.
 
Apply Meo is equivalent to ADMEO.
  
−
=== AssignUnitsToNextShopOrder ===
+
=== '''<span class="mw-headline" id="AssignUnitsToNextShopOrder">AssignUnitsToNextShopOrder</span>''' ===
  
 
Assign the specified set of unit serial numbers to the oldest eligible shop orders.
 
Assign the specified set of unit serial numbers to the oldest eligible shop orders.
Line 109: Line 116:
 
&nbsp;
 
&nbsp;
  
−
== C ==
+
== '''<span class="mw-headline" id="C">C</span>''' ==
  
−
=== ChangePartNumber ===
+
=== '''<span class="mw-headline" id="ChangePartNumber">ChangePartNumber</span>''' ===
  
 
Change Part Number is equivalent to CHGPN.
 
Change Part Number is equivalent to CHGPN.
  
−
=== ChangeRevision ===
+
=== '''<span class="mw-headline" id="ChangeRevision">ChangeRevision</span>''' ===
  
 
Change Revision is equivalent to CHGREV.
 
Change Revision is equivalent to CHGREV.
  
−
=== ChangeSerialNumber ===
+
=== '''<span class="mw-headline" id="ChangeSerialNumber">ChangeSerialNumber</span>''' ===
  
 
Change Serial Number is equivalent to CHGID.
 
Change Serial Number is equivalent to CHGID.
  
−
=== ClearMatchingAttributes ===
+
=== '''<span class="mw-headline" id="ClearMatchingAttributes">ClearMatchingAttributes</span>''' ===
  
 
Clear Matching Attributes is designed to remove attributes that match a particular input. It is equivalent to CLRATT.L.
 
Clear Matching Attributes is designed to remove attributes that match a particular input. It is equivalent to CLRATT.L.
  
−
=== ClearNonmatchingAttributes ===
+
=== '''<span class="mw-headline" id="ClearNonmatchingAttributes">ClearNonmatchingAttributes</span>''' ===
  
 
Clear Non-Matching Attributes is designed to remove attributes that do NOT match a particular input. It is equivalent to CLARATT.R.
 
Clear Non-Matching Attributes is designed to remove attributes that do NOT match a particular input. It is equivalent to CLARATT.R.
  
−
=== CloseContainer ===
+
=== '''<span class="mw-headline" id="CloseContainer">CloseContainer</span>''' ===
  
 
Close Container is equivalent to CLOSECNTNR.
 
Close Container is equivalent to CLOSECNTNR.
  
−
=== CloseLot ===
+
=== '''<span class="mw-headline" id="CloseLot">CloseLot</span>''' ===
  
 
Close Lot is equivalent to CLOSELOT.
 
Close Lot is equivalent to CLOSELOT.
  
−
=== ConsumeNonSerialized Batch ===
+
=== <span class="mw-headline" id="ConsumeNonSerialized_Batch">'''ConsumeNonSerialized''''''Batch'''</span> ===
  
 
Consume non serialized batch consumes non serialized batches.
 
Consume non serialized batch consumes non serialized batches.
  
−
=== ConsumeSitBatch ===
+
=== '''<span class="mw-headline" id="ConsumeSitBatch">ConsumeSitBatch</span>''' ===
  
 
Consume the specified quantity from the provided Sit Batch serial and add a non-tracked component matching the sit batch serial number to the scanned unit at the specified reference designator.
 
Consume the specified quantity from the provided Sit Batch serial and add a non-tracked component matching the sit batch serial number to the scanned unit at the specified reference designator.
  
−
=== CreateBatchSerial ===
+
=== '''<span class="mw-headline" id="CreateBatchSerial">CreateBatchSerial</span>''' ===
  
 
Creates a Batch Serial number with the provided serial number, batch quantity and shop order number. Can be executed in place of a transaction unit. Roughly equivalent to CRE8BSN in SFDC.
 
Creates a Batch Serial number with the provided serial number, batch quantity and shop order number. Can be executed in place of a transaction unit. Roughly equivalent to CRE8BSN in SFDC.
  
−
=== CreateContainer ===
+
=== '''<span class="mw-headline" id="CreateContainer">CreateContainer</span>''' ===
  
 
Create Container creates a container serial number. Unlike NEWCNTNR it does not immediately initiate prompting for container units. It only creates a container.
 
Create Container creates a container serial number. Unlike NEWCNTNR it does not immediately initiate prompting for container units. It only creates a container.
  
−
=== CreateGeneratedBatchSerial ===
+
=== '''<span class="mw-headline" id="CreateGeneratedBatchSerial">CreateGeneratedBatchSerial</span>''' ===
  
 
Creates a batch serial using the supplied quantity and shop order number. The actual batch serial number will be generated using provided algorithm. Can be executed in place of a transaction unit.
 
Creates a batch serial using the supplied quantity and shop order number. The actual batch serial number will be generated using provided algorithm. Can be executed in place of a transaction unit.
  
−
=== CreateLot ===
+
=== '''<span class="mw-headline" id="CreateLot">CreateLot</span>''' ===
  
 
Create Lot creates a lot serial number. Unlike NEWLOT it does not initiate prompting for lot units. It only creates a lot.
 
Create Lot creates a lot serial number. Unlike NEWLOT it does not initiate prompting for lot units. It only creates a lot.
  
−
=== CreateUnit ===
+
=== '''<span class="mw-headline" id="CreateUnit">CreateUnit</span>''' ===
  
 
Create Unit is a command used to create a new unit.
 
Create Unit is a command used to create a new unit.
  
−
== D ==
+
== '''<span class="mw-headline" id="D">D</span>''' ==
  
−
=== DeallocateStationMaterial ===
+
=== '''<span class="mw-headline" id="DeallocateStationMaterial">DeallocateStationMaterial</span>''' ===
  
 
Deallocate any material for the specified part number at the specified location or the scanning location.
 
Deallocate any material for the specified part number at the specified location or the scanning location.
  
−
== E ==
+
== '''<span class="mw-headline" id="E">E</span>''' ==
  
−
=== END ===
+
=== <span class="mw-headline" id="END">END</span> ===
  
 
End is effectively identical to END in SFDC.
 
End is effectively identical to END in SFDC.
  
−
== F ==
+
== '''<span class="mw-headline" id="F">F</span>''' ==
  
−
=== FindActiveShopOrder ===
+
=== '''<span class="mw-headline" id="FindActiveShopOrder">FindActiveShopOrder</span>''' ===
  
 
Identify the active shop order for the mfg line associated with the location.
 
Identify the active shop order for the mfg line associated with the location.
  
−
=== FindClientStations ===
+
=== '''<span class="mw-headline" id="FindClientStations">FindClientStations</span>''' ===
  
 
Finds client stations.
 
Finds client stations.
  
−
=== FindPrinters ===
+
=== '''FindNextStationUnit&nbsp;''' ===
 +
 
 +
Finds the oldest unit at a station matching an optional part number and shop order number. The most recent unit at a station can be returned if '''LIFO''' (Last in, First out) is specified for the final parameter.&nbsp;
 +
 
 +
=== '''<span class="mw-headline" id="FindPrinters">FindPrinters</span>''' ===
  
 
Identify the printers currently available to the label engine.
 
Identify the printers currently available to the label engine.
  
−
=== FindUnitActivity ===
+
=== '''<span class="mw-headline" id="FindUnitActivity">FindUnitActivity</span>''' ===
  
 
Attempts to find the unit activity for the provided serial number and optional part number.
 
Attempts to find the unit activity for the provided serial number and optional part number.
  
−
=== FindUnitAttribute ===
+
=== '''<span class="mw-headline" id="FindUnitAttribute">FindUnitAttribute</span>''' ===
  
 
Find an attribute matching the specified name for the scanned unit. By default not finding the attribute is an ERROR condition but that can be overridden via parameter
 
Find an attribute matching the specified name for the scanned unit. By default not finding the attribute is an ERROR condition but that can be overridden via parameter
  
−
== L ==
+
== '''<span class="mw-headline" id="L">L</span>''' ==
  
−
=== LinkMedia ===
+
=== '''<span class="mw-headline" id="LinkMedia">LinkMedia</span>''' ===
  
 
Links a media reference identifier to an existing activity for a serial number.
 
Links a media reference identifier to an existing activity for a serial number.
  
−
== M ==
+
== '''<span class="mw-headline" id="M">M</span>''' ==
  
−
=== MergeBatchSerial ===
+
=== '''<span class="mw-headline" id="MergeBatchSerial">MergeBatchSerial</span>''' ===
  
 
Merge the provided batch serial number into the scanned batch unit.
 
Merge the provided batch serial number into the scanned batch unit.
  
−
=== MOVE ===
+
=== '''<span class="mw-headline" id="MOVE">MOVE</span>''' ===
  
 
Effectively identical to MOVE in SFDC.
 
Effectively identical to MOVE in SFDC.
  
−
== O ==
+
== '''<span class="mw-headline" id="O">O</span>''' ==
  
−
=== OpenContainer ===
+
=== '''<span class="mw-headline" id="OpenContainer">OpenContainer</span>''' ===
  
 
Changes the status of a container to Open. Does not initiate container serial scanning like OPENCNTR.
 
Changes the status of a container to Open. Does not initiate container serial scanning like OPENCNTR.
  
−
=== OpenLot ===
+
=== '''<span class="mw-headline" id="OpenLot">OpenLot</span>''' ===
  
 
Changes the status of a lot to Open. Does not initiate lot serial scanning like OPENLOT.
 
Changes the status of a lot to Open. Does not initiate lot serial scanning like OPENLOT.
  
−
== P ==
+
== '''<span class="mw-headline" id="P">P</span>''' ==
  
−
=== PrepareUnitContainer ===
+
=== '''<span class="mw-headline" id="PrepareUnitContainer">PrepareUnitContainer</span>''' ===
  
 
Depending on the type of unit provided either create a container and add the specified unit to it or open the container in preparation for adding more units. This command can be supplied in place of a transaction unit.&nbsp;
 
Depending on the type of unit provided either create a container and add the specified unit to it or open the container in preparation for adding more units. This command can be supplied in place of a transaction unit.&nbsp;
  
−
=== PrintDemoLabel ===
+
=== '''<span class="mw-headline" id="PrintDemoLabel">PrintDemoLabel</span>''' ===
  
 
Print a demo label name for the currently scanned unit serial number to the specified print queue.
 
Print a demo label name for the currently scanned unit serial number to the specified print queue.
  
−
=== PrintLabel ===
+
=== '''<span class="mw-headline" id="PrintLabel">PrintLabel</span>''' ===
  
 
Print HPE label.
 
Print HPE label.
  
−
=== Print Legacy Label ===
+
=== '''<span class="mw-headline" id="Print_Legacy_Label">Print Legacy Label</span>''' ===
  
 
Prints MES labels.
 
Prints MES labels.
  
−
== R ==
+
== '''<span class="mw-headline" id="R">R</span>''' ==
  
−
=== ReconcileComponentMFGHolds ===
+
=== '''<span class="mw-headline" id="ReconcileComponentMFGHolds">ReconcileComponentMFGHolds</span>''' ===
  
 
Traverses the entire component tree and checks to see if a component serial is on hold. RecordDefect Records a defect against a unit. Equivalent to RCDFC in SFDC.
 
Traverses the entire component tree and checks to see if a component serial is on hold. RecordDefect Records a defect against a unit. Equivalent to RCDFC in SFDC.
  
−
=== RecordDefect ===
+
=== '''<span class="mw-headline" id="RecordDefect">RecordDefect</span>''' ===
  
 
Records a defect against the scanned unit. Equivalent to RCDFC in SFDC.
 
Records a defect against the scanned unit. Equivalent to RCDFC in SFDC.
  
−
=== RecordMedia ===
+
=== '''<span class="mw-headline" id="RecordMedia">RecordMedia</span>''' ===
  
 
Records a media activity against the scanned unit with the specified media reference identifier.
 
Records a media activity against the scanned unit with the specified media reference identifier.
  
−
=== RegexMatch ===
+
=== '''<span class="mw-headline" id="RegexMatch">RegexMatch</span>''' ===
  
 
Applies the provided regular expression to the specified value returning OK if it matches and either or NO-OP as specified.
 
Applies the provided regular expression to the specified value returning OK if it matches and either or NO-OP as specified.
  
−
=== RegexReplace ===
+
=== '''<span class="mw-headline" id="RegexReplace">RegexReplace</span>''' ===
  
 
Replaces substrings that match the regular expression with the replacement string.
 
Replaces substrings that match the regular expression with the replacement string.
  
−
=== RejectIfDefective ===
+
=== '''<span class="mw-headline" id="RejectIfDefective">RejectIfDefective</span>''' ===
  
 
Moves scanned unit to the relevant failure location if any&nbsp;unrepaired defects exist on that unit at all, otherwise, do nothing.&nbsp;
 
Moves scanned unit to the relevant failure location if any&nbsp;unrepaired defects exist on that unit at all, otherwise, do nothing.&nbsp;
  
−
=== RejectIfMissingAttribute ===
+
=== '''<span class="mw-headline" id="RejectIfMissingAttribute">RejectIfMissingAttribute</span>''' ===
  
 
Fails a unit that is missing the provided attribute. Equivalent to VERATT.LIST.
 
Fails a unit that is missing the provided attribute. Equivalent to VERATT.LIST.
  
−
=== RejectIfMissingAttributes ===
+
=== '''<span class="mw-headline" id="RejectIfMissingAttributes">RejectIfMissingAttributes</span>''' ===
  
 
Fails a unit that is missing any configured attributes. Equivalent to VERATT.ALL.
 
Fails a unit that is missing any configured attributes. Equivalent to VERATT.ALL.
  
−
=== RejectIfMissingComponents ===
+
=== '''<span class="mw-headline" id="RejectIfMissingComponents">RejectIfMissingComponents</span>''' ===
  
 
Fails a unit that is missing any assembly components. Unlike VERCMP this command has to be provided with a failure location just like Reject if Missing Attribute[s] (VERATT).
 
Fails a unit that is missing any assembly components. Unlike VERCMP this command has to be provided with a failure location just like Reject if Missing Attribute[s] (VERATT).
  
−
=== RejectIfMissingProcessAttributes ===
+
=== '''<span class="mw-headline" id="RejectIfMissingProcessAttributes">RejectIfMissingProcessAttributes</span>''' ===
  
 
Fails a unit that is missing any attributes matching the current scanning location’s process. Effectively equivalent to VERATT.PROC.
 
Fails a unit that is missing any attributes matching the current scanning location’s process. Effectively equivalent to VERATT.PROC.
  
−
=== RemoveAllComponents ===
+
=== '''<span class="mw-headline" id="RemoveAllComponents">RemoveAllComponents</span>''' ===
  
 
Removes all components from a unit. Equivalent to RMCMPALL.
 
Removes all components from a unit. Equivalent to RMCMPALL.
  
−
=== RemoveAttribute ===
+
=== '''<span class="mw-headline" id="RemoveAttribute">RemoveAttribute</span>''' ===
  
 
Removes an attribute. Similar to ATTREMOVE but the specific attribute must be provided.
 
Removes an attribute. Similar to ATTREMOVE but the specific attribute must be provided.
  
−
=== RemoveComponent ===
+
=== '''<span class="mw-headline" id="RemoveComponent">RemoveComponent</span>''' ===
  
 
Removes a component. Similar to RMCMP2.
 
Removes a component. Similar to RMCMP2.
  
−
=== RemoveComponentFrom ===
+
=== '''<span class="mw-headline" id="RemoveComponentFrom">RemoveComponentFrom</span>''' ===
  
 
Removes a component of any type matching the provided <component id> from the specified unit.
 
Removes a component of any type matching the provided <component id> from the specified unit.
  
−
=== RemoveProcesAttributes ===
+
=== '''<span class="mw-headline" id="RemoveProcesAttributes">RemoveProcesAttributes</span>''' ===
  
 
Removes any attributes defined for addition at the provided process from the scanned unit.
 
Removes any attributes defined for addition at the provided process from the scanned unit.
  
−
=== RemoveProcessComponents ===
+
=== '''<span class="mw-headline" id="RemoveProcessComponents">RemoveProcessComponents</span>''' ===
  
 
Removes any components defined for addition at the provided process from the scanned unit.
 
Removes any components defined for addition at the provided process from the scanned unit.
  
−
=== RemoveUnitFromContainer ===
+
=== '''<span class="mw-headline" id="RemoveUnitFromContainer">RemoveUnitFromContainer</span>''' ===
  
 
Removes a unit from a container. Equivalent to RMVFRMCNTNR.
 
Removes a unit from a container. Equivalent to RMVFRMCNTNR.
  
−
=== RemoveUnitFromLot ===
+
=== '''<span class="mw-headline" id="RemoveUnitFromLot">RemoveUnitFromLot</span>''' ===
  
 
Removes a unit from a lot. Equivalent to RMVFRMLOT.
 
Removes a unit from a lot. Equivalent to RMVFRMLOT.
  
−
=== RenderLabel ===
+
=== '''<span class="mw-headline" id="RenderLabel">RenderLabel</span>''' ===
  
 
Signal the label engine service to render a printable label and download it to a local temporary file. Note: the downloaded file is only guaranteed to exist for the duration of the request session.
 
Signal the label engine service to render a printable label and download it to a local temporary file. Note: the downloaded file is only guaranteed to exist for the duration of the request session.
  
−
=== RepairDefect ===
+
=== '''<span class="mw-headline" id="RepairDefect">RepairDefect</span>''' ===
  
 
Repair a defect on a unit. Similar to RCRPR but the defect sequence to be repaired must be provided.
 
Repair a defect on a unit. Similar to RCRPR but the defect sequence to be repaired must be provided.
  
−
=== ReplaceAttribute ===
+
=== '''<span class="mw-headline" id="ReplaceAttribute">ReplaceAttribute</span>''' ===
  
 
Replace an existing attribute with a new attribute.
 
Replace an existing attribute with a new attribute.
  
−
=== ReplaceAttributeOn ===
+
=== '''<span class="mw-headline" id="ReplaceAttributeOn">ReplaceAttributeOn</span>''' ===
  
 
Replaces an attribute (if one exists) and adds one to the specified unit serial number. Similar to ADCMP2 for non-tracked components in SFDC this command does not require an existing attribute definition.
 
Replaces an attribute (if one exists) and adds one to the specified unit serial number. Similar to ADCMP2 for non-tracked components in SFDC this command does not require an existing attribute definition.
  
−
=== ReplaceComponent ===
+
=== '''<span class="mw-headline" id="ReplaceComponent">ReplaceComponent</span>''' ===
  
 
Replaces a component at the provided <component id> on the scanned unit with a new component. Equivalent to RPCMP2 in SFDC.
 
Replaces a component at the provided <component id> on the scanned unit with a new component. Equivalent to RPCMP2 in SFDC.
  
−
=== ReplaceComponentAt ===
+
=== '''<span class="mw-headline" id="ReplaceComponentAt">ReplaceComponentAt</span>''' ===
  
 
Replaces a component at the provided <reference designator> on the scanned unit with a new component.
 
Replaces a component at the provided <reference designator> on the scanned unit with a new component.
  
−
=== ReplaceConsumedNonSerializedBatch ===
+
=== '''<span class="mw-headline" id="ReplaceConsumedNonSerializedBatch">ReplaceConsumedNonSerializedBatch</span>''' ===
  
 
Replaces consumed non serialized batches.
 
Replaces consumed non serialized batches.
  
−
=== ReplaceNontrackedAssemblyComponent ===
+
=== '''<span class="mw-headline" id="ReplaceNontrackedAssemblyComponent">ReplaceNontrackedAssemblyComponent</span>''' ===
  
 
Replace a previously existing “Scanning Template” non-tracked component with a new one.
 
Replace a previously existing “Scanning Template” non-tracked component with a new one.
  
−
=== ReplaceNontrackedComponent ===
+
=== '''<span class="mw-headline" id="ReplaceNontrackedComponent">ReplaceNontrackedComponent</span>''' ===
  
 
Replace a previously existing non-tracked component; equivalent to RPCMP2.
 
Replace a previously existing non-tracked component; equivalent to RPCMP2.
  
−
=== ReplaceNontrackedComponentAt ===
+
=== '''<span class="mw-headline" id="ReplaceNontrackedComponentAt">ReplaceNontrackedComponentAt</span>''' ===
  
 
Replaces an existing non-tracked component with a matching <reference designator> (if one exists) and adds a new non-tracked component.
 
Replaces an existing non-tracked component with a matching <reference designator> (if one exists) and adds a new non-tracked component.
  
−
=== ReplaceNontrackedComponentOn ===
+
=== '''<span class="mw-headline" id="ReplaceNontrackedComponentOn">ReplaceNontrackedComponentOn</span>''' ===
  
 
Replaces an existing non-tracked component on the specified unit serial number with a matching <component id> (if one exists) and adds a new non-tracked component.
 
Replaces an existing non-tracked component on the specified unit serial number with a matching <component id> (if one exists) and adds a new non-tracked component.
  
−
=== ReplaceTrackedAssemblyComponent ===
+
=== '''<span class="mw-headline" id="ReplaceTrackedAssemblyComponent">ReplaceTrackedAssemblyComponent</span>''' ===
  
 
Replace a preexisting “Scanning Template” tracked component with a new one.
 
Replace a preexisting “Scanning Template” tracked component with a new one.
  
−
=== ReplaceTrackedComponent ===
+
=== '''<span class="mw-headline" id="ReplaceTrackedComponent">ReplaceTrackedComponent</span>''' ===
  
 
Replace a previously existing tracked component, effectively equivalent to RPCMP2.
 
Replace a previously existing tracked component, effectively equivalent to RPCMP2.
  
−
=== ReplaceTrackedComponentAt ===
+
=== '''<span class="mw-headline" id="ReplaceTrackedComponentAt">ReplaceTrackedComponentAt</span>''' ===
  
 
Replaces an existing tracked component with a matching <reference designator> (if one exists) and adds a new tracked component.
 
Replaces an existing tracked component with a matching <reference designator> (if one exists) and adds a new tracked component.
  
−
=== ReplaceUniqueComponent ===
+
=== '''<span class="mw-headline" id="ReplaceUniqueComponent">ReplaceUniqueComponent</span>''' ===
  
 
Replace a preexisting unique component. SplitPanel Effectively equivalent to SPLTP. ViewComponents Equivalent to VWCMP. ViewDefects Effectively equivalent to VWDFC. ViewHistory Effectively equivalent to VWHST.
 
Replace a preexisting unique component. SplitPanel Effectively equivalent to SPLTP. ViewComponents Equivalent to VWCMP. ViewDefects Effectively equivalent to VWDFC. ViewHistory Effectively equivalent to VWHST.
  
−
=== ReplaceUniqueComponentAt ===
+
=== '''<span class="mw-headline" id="ReplaceUniqueComponentAt">ReplaceUniqueComponentAt</span>''' ===
  
 
Replaces an existing unique component with a matching <reference designator> (if one exists) and adds a new unique component. Because these are unique components the associated serial records will be deleted / created during this operation.
 
Replaces an existing unique component with a matching <reference designator> (if one exists) and adds a new unique component. Because these are unique components the associated serial records will be deleted / created during this operation.
  
−
== S ==
+
== '''<span class="mw-headline" id="S">S</span>''' ==
  
−
=== SampleUnit ===
+
=== '''<span class="mw-headline" id="SampleUnit">SampleUnit</span>''' ===
  
 
Samples a unit based upon a configured sample master / plan. The unit will either be moved to the sample location if eligible or Ended (passed / failed) to the next location in the route.
 
Samples a unit based upon a configured sample master / plan. The unit will either be moved to the sample location if eligible or Ended (passed / failed) to the next location in the route.
  
−
=== SplitBatchSerial ===
+
=== '''<span class="mw-headline" id="SplitBatchSerial">SplitBatchSerial</span>''' ===
  
 
Splits the provided quantity number of components from the scanned batch unit. The split batch will be created using the supplied serial number.
 
Splits the provided quantity number of components from the scanned batch unit. The split batch will be created using the supplied serial number.
  
−
=== SplitGeneratedBatchSerial ===
+
=== '''<span class="mw-headline" id="SplitGeneratedBatchSerial">SplitGeneratedBatchSerial</span>''' ===
  
 
Splits the provided quantity number of components from the scanned batch unit. The split batch will be created using a serial number generated from the supplied algorithm.
 
Splits the provided quantity number of components from the scanned batch unit. The split batch will be created using a serial number generated from the supplied algorithm.
  
−
=== SplitPanel ===
+
=== '''<span class="mw-headline" id="SplitPanel">SplitPanel</span>''' ===
  
 
Splits the scanned unit (panel) using the provided serial number and quantity. Equivalent to SPLTP in SFDC.
 
Splits the scanned unit (panel) using the provided serial number and quantity. Equivalent to SPLTP in SFDC.
  
−
=== StoreMedia ===
+
=== '''<span class="mw-headline" id="StoreMedia">StoreMedia</span>''' ===
  
 
Uploads the contents of the specified media file or parameter to the media service for long-term storage.
 
Uploads the contents of the specified media file or parameter to the media service for long-term storage.
  
−
== U ==
+
== '''<span class="mw-headline" id="U">U</span>''' ==
  
−
=== UnitActivity ===
+
=== '''<span class="mw-headline" id="UnitActivity">UnitActivity</span>''' ===
  
 
Returns the unit history for the scanned unit.
 
Returns the unit history for the scanned unit.
  
−
== V ==
+
== '''<span class="mw-headline" id="V">V</span>''' ==
  
−
=== ValidateDate ===
+
=== '''<span class="mw-headline" id="ValidateDate">ValidateDate</span>''' ===
  
 
Validate the specified date within the specified date range.
 
Validate the specified date within the specified date range.
  
−
=== ValidateTimeStamp ===
+
=== '''<span class="mw-headline" id="ValidateTimeStamp">ValidateTimeStamp</span>''' ===
  
 
Validate the specified timestamp is within the date range.
 
Validate the specified timestamp is within the date range.
  
−
=== ViewComponents ===
+
=== '''<span class="mw-headline" id="ViewComponents">ViewComponents</span>''' ===
  
 
SFDC data collector formatted components for the scanned unit.
 
SFDC data collector formatted components for the scanned unit.
  
−
=== ViewDefects ===
+
=== '''<span class="mw-headline" id="ViewDefects">ViewDefects</span>''' ===
  
 
SFDC data collector formatted unrepaired defects for the scanned unit.
 
SFDC data collector formatted unrepaired defects for the scanned unit.
  
−
=== ViewHistory ===
+
=== '''<span class="mw-headline" id="ViewHistory">ViewHistory</span>''' ===
  
 
SFDC data collector formatted unit history for the scanned unit.
 
SFDC data collector formatted unit history for the scanned unit.
  
−
= Conduit Command Listing =
+
= <span class="mw-headline" id="Conduit_Command_Listing">Conduit Command Listing</span> =
  
−
Every command currently available can be found at the following URL:  
+
Every command currently available can be found at the following URL:
  
−
[https://42qconduit1.42-q.com:18006/ccr https://42qconduit1.42-q.com:18006/ccr]<br>
+
[https://42qconduit1.42-q.com:18006/ccr https://42qconduit1.42-q.com:18006/ccr]
  
−
<br>
+
&nbsp;
  
 +
&nbsp;
  
 +
&nbsp;
  
 +
&nbsp;
  
−
 
+
= <span class="mw-headline" id="Document_Revision_History">Document Revision History</span> =
−
 
 
−
= Document Revision History =
 
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 478: Line 490:
 
| Technical Writer
 
| Technical Writer
 
| A3
 
| A3
−
| Corrected and updatedRevision History to reflect current convention.
+
| Corrected and updated Revision History to reflect current convention.
 +
|-
 +
| 04/03/18
 +
| Elaine Fonaro
 +
| Technical Writer
 +
| B
 +
| Applied new Template for the format.
 
|-
 
|-
 
| 05/06/19
 
| 05/06/19
 
| Mildred Rodriguez
 
| Mildred Rodriguez
 
| Technical Writer
 
| Technical Writer
−
| A4
+
| B1
 
| RejectIfDefective command added.
 
| RejectIfDefective command added.
 
|-
 
|-
Line 489: Line 507:
 
| Marisol Vargas&nbsp;
 
| Marisol Vargas&nbsp;
 
| Technical Writer&nbsp;
 
| Technical Writer&nbsp;
−
| A5
+
| B3
 
|  
 
|  
 
Added the following New commands: AssignUnitsToNextShopOrderDeallocateStationMaterial, FindActiveShopOrder, FindPrinters, FindUnitAttribute, LinkMedia, PrepareUnitContainer, PrintLabel, RecordMedia, RegexMatch, RegexReplace, RenderLabel, StoreMedia, ValidateDate, ValidateTimeStamp
 
Added the following New commands: AssignUnitsToNextShopOrderDeallocateStationMaterial, FindActiveShopOrder, FindPrinters, FindUnitAttribute, LinkMedia, PrepareUnitContainer, PrintLabel, RecordMedia, RegexMatch, RegexReplace, RenderLabel, StoreMedia, ValidateDate, ValidateTimeStamp
  
 +
|-
 +
| 09/28/2020
 +
| Marisol Vargas&nbsp;
 +
| Technical Writer
 +
| B4
 +
| Added the following New commands: AddToLot and FindNextStationUnit
 +
|-
 +
| 10/15/2020
 +
| Marisol Vargas&nbsp;
 +
| Technical Writer
 +
| B5
 +
|
 +
Updated AddNontrackedComponent and AddNontrackedComponentTo and Warning added
 +
 +
|-
 +
| 10/30/2020
 +
| Marisol Vargas
 +
| Technical Writer
 +
| C
 +
| Updated Revision History
 
|}
 
|}

Revision as of 23:57, 30 October 2020

42Q Home > Conduit > Conduit Command Appendix
Sanmina logo.png

 

Conduit
Conduit Command Appendix
Version MES15 Portal 1.10
Work Instruction

 

This Work Instruction is 42Q's corporate standard.
This document is under revision control. The latest revision is located on Intranet.
Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.
Contact the IT Global Education and Training Department to submit suggested alterations and or updates.

 

This edition applies to MES15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.

Contents

 

 

Command Appendix Registry

The commands defined within the Conduit Command Registry represent the core functionality of the Conduit system. Unlike with legacy systems, Conduit commands are full words, generally Pascal case (though technically command names are case insensitive.)

In addition to the more extensive names, Conduit Commands tend to be more focused toward a single concept. Most Conduit commands expect all of their data to be provided up front, leaving the work of gathering that data to the various client implementations in conjunction with the CCRS.

The commands referencing Assembly or Defined components and attribute respectively are designed for use with the Scanning Template mechanism in Conduit. The basic concept is that the actual command to use (tracked, unique, nontracked, etc.) will be provided by Conduit. Individual clients only need to prompt for the appropriate piece of data to satisfy the scan template then construct a Client Command from the Scan Template + user input.

The full list of commands and a short explanation of each are given below:

 

 

A

AddAttribute

Add Attribute does not have an equivalent in SFDC. It is effectively the equivalent of ADCMP2 but for an attribute. It allows adding an attribute for which a definition did not already exist.

AddAttributeTo

Adds an attribute to the specified unit serial number. This command will produce an error if the attribute already exists, no replacement will occur. Similar to ADCMP2 for non-tracked components in SFDC this command does not require an existing attribute definition

AddComment

Adds a comment checked against an optional mask to the scanned unit.  Add Comment is equivalent to ADCOMMENT in SFDC.

AddCommentTo

Adds a comment checked against an optional mask to the specified unit. Equivalent to ADCOMMENT in SFDC.

AddDefinedAttribute

Add Defined Attribute is equivalent to ATTADD in SFDC. Unlike SFDC it is designed to be used with the Conduit “Scanning Template” construct for units that have active / unreconciled Assembly / Attr_Def entries. AddMeasurementKey Add Measurement Key is equivalent to MEASKEY in SFDC.

AddMeasurementKey

Adds a measurement key to the scanned unit. Equivalent to MEASKEY in SFDC.

AddMeasurementKeyTo

Adds a measurement key to the specified unit. Equivalent to MEASKEY in SFDC.

AddNontrackedAssemblyComponent

Add Nontracked Assembly Component is a “Scanning Template” specific command for adding a non-tracked component based on an unreconciled assembly record for a unit. It is equivalent to ADCMP

AddNontrackedComponent

AddNontrackedComponent is very similar to ADCMP2 command in SFDC, in that an assembly record is not used. It adds the component and only updates the old component record from 'removed' to 'replaced' if it finds a removed nontracked component with the same ref_designator on the serial.

AddNontrackedComponentTo

Adds a non-tracked component to the specified unit. It is exactly the same as AddNonTrackedComponent, except that it does not require a scanned unit, only a serial number.

Warning: Using either of these AddNontrackedComponent/To commands multiple times for a given serial and ref_designator can result in multiple active components with the same ref_designator. In order to remove and replace an existing component for a serial/ref_designator, so that only one is active, you must use the ReplaceNontrackedComponent/To the version of these commands. 

AddToLot

Adds the scanned unit serial number to the specified lot.

AddTrackedComponent

'A'ddTrackedComponent is very similar to ADCMP3 command in SFDC, in that an assembly record is not used. It adds the component and only updates the old component record from 'removed' to 'replaced' if it finds a removed tracked component with the same ref_designator on the serial.

AddTrackedComponentTo

Adds a tracked component to the specified unit. It is exactly the same as AddTrackedComponent, except that it does not require a scanned unit, only a serial number.

Warning: Using either of these AddTrackedComponent/To commands multiple times for a given serial and ref_designator can result in multiple active components with the same ref_designator. In order to remove and replace an existing component for a serial/ref_designator, so that only one is active, you must use theReplaceTrackedComponent/To the version of these commands. 

AddUniqueComponent

Adds a non-tracked component to the specified unit. Unlike Add Non-Tracked Component this does not require a scanned unit. This command will not replace an existing unremoved component with that component id but it will mark a previously removed component as replaced.

AddUniqueAssemblyComponent

Add Unique Assembly Component is the unique component version of the Scanning Template enabled ADCMP command in SFDC. AddUniqueComponent Add Unique Component has no corollary in SFDC today. It is designed to add a unique component without a predefined assembly record just like ADCMP2 (non-tracked) or ADCMP3 (tracked). AddUnitToContainer Add Unit To Container has no equivalent command in SFDC. SFDC Containerization essentially does the same thing via complicated mini-sessions executed after NEWCNTNR / OPENCNTNR.

AddUnitToContainer

Adds provided unit serial number to the scanned container serial.

AddUnitToLot

Add Unit To Lot has no equivalent command in SFDC. SFDC “Lotization” is handled via cumbersome sessions within NEWLOT / OPENLOT.

AdvancedShopOrderUnits

Ends up to <unit limit> units for the supplied shop order number at the provided workstation. Units are chosen in FIFO order for the specified workstation. This command can be executed without a transaction unit.

ApplyMeo

Apply Meo is equivalent to ADMEO.

AssignUnitsToNextShopOrder

Assign the specified set of unit serial numbers to the oldest eligible shop orders.

 

C

ChangePartNumber

Change Part Number is equivalent to CHGPN.

ChangeRevision

Change Revision is equivalent to CHGREV.

ChangeSerialNumber

Change Serial Number is equivalent to CHGID.

ClearMatchingAttributes

Clear Matching Attributes is designed to remove attributes that match a particular input. It is equivalent to CLRATT.L.

ClearNonmatchingAttributes

Clear Non-Matching Attributes is designed to remove attributes that do NOT match a particular input. It is equivalent to CLARATT.R.

CloseContainer

Close Container is equivalent to CLOSECNTNR.

CloseLot

Close Lot is equivalent to CLOSELOT.

'ConsumeNonSerialized'Batch

Consume non serialized batch consumes non serialized batches.

ConsumeSitBatch

Consume the specified quantity from the provided Sit Batch serial and add a non-tracked component matching the sit batch serial number to the scanned unit at the specified reference designator.

CreateBatchSerial

Creates a Batch Serial number with the provided serial number, batch quantity and shop order number. Can be executed in place of a transaction unit. Roughly equivalent to CRE8BSN in SFDC.

CreateContainer

Create Container creates a container serial number. Unlike NEWCNTNR it does not immediately initiate prompting for container units. It only creates a container.

CreateGeneratedBatchSerial

Creates a batch serial using the supplied quantity and shop order number. The actual batch serial number will be generated using provided algorithm. Can be executed in place of a transaction unit.

CreateLot

Create Lot creates a lot serial number. Unlike NEWLOT it does not initiate prompting for lot units. It only creates a lot.

CreateUnit

Create Unit is a command used to create a new unit.

D

DeallocateStationMaterial

Deallocate any material for the specified part number at the specified location or the scanning location.

E

END

End is effectively identical to END in SFDC.

F

FindActiveShopOrder

Identify the active shop order for the mfg line associated with the location.

FindClientStations

Finds client stations.

FindNextStationUnit 

Finds the oldest unit at a station matching an optional part number and shop order number. The most recent unit at a station can be returned if LIFO (Last in, First out) is specified for the final parameter. 

FindPrinters

Identify the printers currently available to the label engine.

FindUnitActivity

Attempts to find the unit activity for the provided serial number and optional part number.

FindUnitAttribute

Find an attribute matching the specified name for the scanned unit. By default not finding the attribute is an ERROR condition but that can be overridden via parameter

L

LinkMedia

Links a media reference identifier to an existing activity for a serial number.

M

MergeBatchSerial

Merge the provided batch serial number into the scanned batch unit.

MOVE

Effectively identical to MOVE in SFDC.

O

OpenContainer

Changes the status of a container to Open. Does not initiate container serial scanning like OPENCNTR.

OpenLot

Changes the status of a lot to Open. Does not initiate lot serial scanning like OPENLOT.

P

PrepareUnitContainer

Depending on the type of unit provided either create a container and add the specified unit to it or open the container in preparation for adding more units. This command can be supplied in place of a transaction unit. 

PrintDemoLabel

Print a demo label name for the currently scanned unit serial number to the specified print queue.

PrintLabel

Print HPE label.

Print Legacy Label

Prints MES labels.

R

ReconcileComponentMFGHolds

Traverses the entire component tree and checks to see if a component serial is on hold. RecordDefect Records a defect against a unit. Equivalent to RCDFC in SFDC.

RecordDefect

Records a defect against the scanned unit. Equivalent to RCDFC in SFDC.

RecordMedia

Records a media activity against the scanned unit with the specified media reference identifier.

RegexMatch

Applies the provided regular expression to the specified value returning OK if it matches and either or NO-OP as specified.

RegexReplace

Replaces substrings that match the regular expression with the replacement string.

RejectIfDefective

Moves scanned unit to the relevant failure location if any unrepaired defects exist on that unit at all, otherwise, do nothing. 

RejectIfMissingAttribute

Fails a unit that is missing the provided attribute. Equivalent to VERATT.LIST.

RejectIfMissingAttributes

Fails a unit that is missing any configured attributes. Equivalent to VERATT.ALL.

RejectIfMissingComponents

Fails a unit that is missing any assembly components. Unlike VERCMP this command has to be provided with a failure location just like Reject if Missing Attribute[s] (VERATT).

RejectIfMissingProcessAttributes

Fails a unit that is missing any attributes matching the current scanning location’s process. Effectively equivalent to VERATT.PROC.

RemoveAllComponents

Removes all components from a unit. Equivalent to RMCMPALL.

RemoveAttribute

Removes an attribute. Similar to ATTREMOVE but the specific attribute must be provided.

RemoveComponent

Removes a component. Similar to RMCMP2.

RemoveComponentFrom

Removes a component of any type matching the provided <component id> from the specified unit.

RemoveProcesAttributes

Removes any attributes defined for addition at the provided process from the scanned unit.

RemoveProcessComponents

Removes any components defined for addition at the provided process from the scanned unit.

RemoveUnitFromContainer

Removes a unit from a container. Equivalent to RMVFRMCNTNR.

RemoveUnitFromLot

Removes a unit from a lot. Equivalent to RMVFRMLOT.

RenderLabel

Signal the label engine service to render a printable label and download it to a local temporary file. Note: the downloaded file is only guaranteed to exist for the duration of the request session.

RepairDefect

Repair a defect on a unit. Similar to RCRPR but the defect sequence to be repaired must be provided.

ReplaceAttribute

Replace an existing attribute with a new attribute.

ReplaceAttributeOn

Replaces an attribute (if one exists) and adds one to the specified unit serial number. Similar to ADCMP2 for non-tracked components in SFDC this command does not require an existing attribute definition.

ReplaceComponent

Replaces a component at the provided <component id> on the scanned unit with a new component. Equivalent to RPCMP2 in SFDC.

ReplaceComponentAt

Replaces a component at the provided <reference designator> on the scanned unit with a new component.

ReplaceConsumedNonSerializedBatch

Replaces consumed non serialized batches.

ReplaceNontrackedAssemblyComponent

Replace a previously existing “Scanning Template” non-tracked component with a new one.

ReplaceNontrackedComponent

Replace a previously existing non-tracked component; equivalent to RPCMP2.

ReplaceNontrackedComponentAt

Replaces an existing non-tracked component with a matching <reference designator> (if one exists) and adds a new non-tracked component.

ReplaceNontrackedComponentOn

Replaces an existing non-tracked component on the specified unit serial number with a matching <component id> (if one exists) and adds a new non-tracked component.

ReplaceTrackedAssemblyComponent

Replace a preexisting “Scanning Template” tracked component with a new one.

ReplaceTrackedComponent

Replace a previously existing tracked component, effectively equivalent to RPCMP2.

ReplaceTrackedComponentAt

Replaces an existing tracked component with a matching <reference designator> (if one exists) and adds a new tracked component.

ReplaceUniqueComponent

Replace a preexisting unique component. SplitPanel Effectively equivalent to SPLTP. ViewComponents Equivalent to VWCMP. ViewDefects Effectively equivalent to VWDFC. ViewHistory Effectively equivalent to VWHST.

ReplaceUniqueComponentAt

Replaces an existing unique component with a matching <reference designator> (if one exists) and adds a new unique component. Because these are unique components the associated serial records will be deleted / created during this operation.

S

SampleUnit

Samples a unit based upon a configured sample master / plan. The unit will either be moved to the sample location if eligible or Ended (passed / failed) to the next location in the route.

SplitBatchSerial

Splits the provided quantity number of components from the scanned batch unit. The split batch will be created using the supplied serial number.

SplitGeneratedBatchSerial

Splits the provided quantity number of components from the scanned batch unit. The split batch will be created using a serial number generated from the supplied algorithm.

SplitPanel

Splits the scanned unit (panel) using the provided serial number and quantity. Equivalent to SPLTP in SFDC.

StoreMedia

Uploads the contents of the specified media file or parameter to the media service for long-term storage.

U

UnitActivity

Returns the unit history for the scanned unit.

V

ValidateDate

Validate the specified date within the specified date range.

ValidateTimeStamp

Validate the specified timestamp is within the date range.

ViewComponents

SFDC data collector formatted components for the scanned unit.

ViewDefects

SFDC data collector formatted unrepaired defects for the scanned unit.

ViewHistory

SFDC data collector formatted unit history for the scanned unit.

Conduit Command Listing

Every command currently available can be found at the following URL:

https://42qconduit1.42-q.com:18006/ccr

 

 

 

 

Document Revision History

Date Author Title Version Change Reference
01/26/17 Benjamin Cavanaugh Technical Writer A This is the first version of the Conduit Command Appendix.
04/21/17 Benjamin Cavanaugh Technical Writer A1 Command list updated and URL fixed.
06/14/17 Elaine Fonaro Technical Writer A2 Deleted LegacyCustomCommand.
11/06/17 Lucas Hopkins Technical Writer A3 Corrected and updated Revision History to reflect current convention.
04/03/18 Elaine Fonaro Technical Writer B Applied new Template for the format.
05/06/19 Mildred Rodriguez Technical Writer B1 RejectIfDefective command added.
05/26/2020 Marisol Vargas  Technical Writer  B3

Added the following New commands: AssignUnitsToNextShopOrderDeallocateStationMaterial, FindActiveShopOrder, FindPrinters, FindUnitAttribute, LinkMedia, PrepareUnitContainer, PrintLabel, RecordMedia, RegexMatch, RegexReplace, RenderLabel, StoreMedia, ValidateDate, ValidateTimeStamp

09/28/2020 Marisol Vargas  Technical Writer B4 Added the following New commands: AddToLot and FindNextStationUnit
10/15/2020 Marisol Vargas  Technical Writer B5

Updated AddNontrackedComponent and AddNontrackedComponentTo and Warning added

10/30/2020 Marisol Vargas Technical Writer C Updated Revision History
Retrieved from "https://42qrpt1.42-q.com/mes_wiki/index.php?title=42Q-MES0085-C_Conduit_Command_Appendix&oldid=35337"