Internal:42Q Detailed Release Notes

Cirrus > Cirrus Release Notes

The following release notes were created to communicate with customers and clients the details of changes or enhancements made to the Cirrus portal. The release notes are organized by date, with the most recent appearing first.

August 2015

Improvements/Bug Fixed:

For Cirrus version v1.11

SFDC PC Side:
• mes15_sfdc-sfdc-1.11.7.150710-1
WR#183757: Xcellerator - Multi-threading changes
WR#186518: Consolidate upload commands development and test
SR#2621853:When using Cirrus portal Part change function created duplicate s/n"
WR#186519: EMVDNLD and Socket Log changes."
WR#178127: DTC IN USE.
WR#181620: Login Reset for SFDC v1.10.
WR#182742: SFDC holds all PNs when SPC monitor sends SPC Hold.
WR#186804: Re-build packages to v1.11
WR#192380: Make changes to SFDC 7.03 in order to support new component type
WR#188652: SRX - Sampling failures
Mantis#0026218: NON serialize batch qty error after sfdc dnld empty."
Mantis#0026456: System time couldn’t get updated when doing SFDC restart.
Mantis#0026253: MERGBSN action record display in wrong way.
Fix the upload order issue, including the functions of uphpu, upSampleLog, upSamplePlan
Resolve the network problem
Change the interface to muti-line mode for !!command
Removed the logic of non-serialized batch automatically calling SPLTNBSN
Mantis#0027615: Missed Component part number at upcomp2 for Custom Component
SR#2762722: BE - Component assembly-key >999
Mantis#0027551: RPCMP and RPCMP2 dislays 'New comp_id?' on the next-to location
Mantis#0027502: mes15_sfdc-sfdc-1.11.7.150618-1]Replace Comp_id fail (issue of RPCMP and RPCMP2 reset sfdc device and cause re-login)
SR#2740821: MESWEB Wrong History display (activity.i1 issue)

• mes15_sfdc-db-schema-1.11.7.150527-1
WR#192380: Make changes to SFDC 7.03 in order to support new component type
WR#186519: EMVDNLD and Socket Log changes.
WR#186518: Multi-threading and consolidated up command changes
WR#186804: Re-build packages to v1.11

• mes15_sfdc-webservice-1.11.7.150305-1
WR#188711: [MES Android] APK Issue List Follow up and Fix
WR#186519: EMVDNLD and Socket Log changes
WR#186804: Re-build packages to v1.11
WR#186395: [PCB] To Support Location Description for Each location
Mantis#26432: EV Expiration Date Mismatch
Mantis#0026326: Socket log is empty
To fix the issue of APK: poor performance. Description: when scanning serial number at APK side, "Wait!" message for 1 or 2 minutes.

• mes15_sfdc-tomcat-log-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-autosfdc-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-install-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-nagios-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-sanm-repo-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-sudo-patch-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

Portlet side:
• mes15_sfdc-portlet-1.11.7.150729-1
WR#193495: [Agile/MES Integration] Updated Value Validation with Implemented Value
WR#193013:[PCB] Engineering Notes Missing at MESWEB Report
WR#192774:[Agile/MES Integration] Part Number list of Values Match with MES
WR#192773:[Agile/MES Integration] Mapping should not be deleted once Implememented
WR#192771:[Agile/MES Integration]Keep the index until deviation """"Implement""""
WR#192770:[Agile/MES Integration] One Acknowledgement per Cover Page"""
WR#192772: [Agile/MES Integration] More Serials should be able to be Added.
WR#189508: Multi-language support for sfdc portlets
WR#189082: [Agile/MES Integration] Cover Page and Deviation Mapping for BE
WR#187446: [Agile / MES Integration] To Support Unit QTY for Deviation
WR#187304: [PCB] Engineering Notes for Independent Route Option
WR#187159: [PCB] Support to Display Work Order Units for Rework Step
WR#186644: [PCB] To Support Engineering Notes Mapping under Route Independence
WR#186804: Re-build packages to v1.11
Mantis#0027204: [mes15_sfdc-portlet-1.11.7.150515-1]Upload Gencad fail.
Mantis#0027159: eManual not send out alert mail when WI will be expired
Mantis#0027084: document type is not the type be defined in document type portlet.
Mantis#0027143: Agile PN document mapping failure.
Mantis#0027159: eManual not send out alert mail when WI will be expired.
Mantis#0027160: Fail to check PDF by URL
Mantis#0027062: Upload document, when select shop floor id, always be first.
Engineering notes missing issue for MESWEB
Mantis#0027159: eManual not send out alert mail when WI will be expired.
Mantis#26406: sfdc portlet System Information widget, 'MDS' label change to 'IP'"
Mantis#0026421: Upload PDF by URL - Fail to Save
Mantis#0026379: Task Scheduler will remove all created tasks after one task has been executed or updated.
Mantis#26394: Historical Yield/Defects doesn't show date range."
Mantis#0026383: Label Display Issue.
Mantis#0026379: Task Scheduler will remove all created tasks after one task has been executed or updated."
SR#2623725: Emulator display all locations.

Mantis#0027692: Fail to upload .cad file.

MES Portal side:

• mes15_sfdc-config-2.0.150806-1
Fixes Sample Plan counter reset issue.
Fixes "copy and paste" issues on comboxbox components.
Enhances Part Number import performance.
Adds support to CSV, HTML, PDF and XLS export file formats.
Assembly Maintenance: Added support to Custom Component type.
Route Maintenance: Fixed an issue that prevented user from add sub-route steps.
Shop Floor Id: Added a logic to ensure that a user can only update the SFDC Clients assigned assigned to MDS database of the current logged SITE
SR#2652325: Added a loading mask for the combo-box fields and improved the code to get locations for multiple sources fields all at once.
i18n support.
Attribute Maintenance: Enhancemets on Copy window and reset.
Assembly Maintenance: Fixed a bug (SR# 2546899) on assembly export functionality.
Data Collector: Fixed a bug in the main grid pagging.
Record Component: Business Logic review.
Revision Change: Usability enhancements. Fixed wrong messages on Summary section.
Defect Code: Fixed a bug in the Defect Codes's import routine when desired file had one of following chars "[]\\^$.|?*+(),"

• mes15_kv-production-2.0.150806-1
Fixes UI resize issues on chrome.
Adds support to CSV, HTML, PDF and XLS export file formats.
Fixes T472 : No S/N available on "Kit Processing by Serial Number" screen.
Fixes T473 : Print Traveler report - Problem on Serialized Components.
Defined default defect (KVDC), sympton (KVSC) and repair (KVRC) codes. These codes can be adjusted by admins.
Fixed T460 : The Component Mask Validation is case sensitive, and by definition, component id are upper case. The system must make the input all upper case automatically.

• mes15_mlc-maintenance-2.0.150806-1
Prevents users from containerizing an element twice.
Adds support to CSV, HTML, PDF and XLS export file formats.
SR#2694225: Container loses its revision when it is reopened and closed.
Container Browser performance enhancements.
P23191 PG COPS Replacement - Export Container file format review. New logic for Order Line information based on Business Model (ATO, and Non-ATO).
SR#2694225: Container loses its revision when it is reopened and closed.
SR#2695567: Cannot print a container # via Label Engine system.
i18n support
Added support to pallet sheet printing
WR#180152: [Measurement] E55 BloodHound / Custom Containerization App

• mes15_serialized-item-tracker-2.0.150806-1
General performance improvement.
Adds support to CSV, HTML, PDF and XLS export file formats.
Added support to SFDC Attributes and new its new Mask (Data Type) validation on Receiving SN range.
Performance Improvements
i18n support.
Fixed "Add Attribute" activity wrong attribute number information.
Fixed serial number sort in every screen.

• mes15_shop-order-control-2.0.150806-1
Fixes the "copy and paste" issue on comboxbox components.
Adds support to CSV, HTML, PDF and XLS export file formats.
Refactored the delete unstarted units and delete shop order features to be unit archive aware.
Mantis#26929 - Some Serial Number cannot be printed on Shop Order Browser.
P23191 PG COPS Replacement.
Add Manual Sales Order Request feature.
More information on Sales Order information.
Changed the WIP traveler report to fit on the requirements.
i18n support.
Show Operation Sequence's Op Code information on Shop Order portlet.
Shop Order Information, new file for "User Defined".

• mes15_Sanm.MESWeb.Central.View-1.0.150730-1

Bundles translated to Spanish and Chinese.
Report builder
Import multiple users in User screen and Mapping User Group in User Group screen.
Internationalization
Manage permission to User Group.
Manage permission by Data Source to User and User Group.
New parameter: Long Location List Box.
Connect to oracle DB.
Fix error msg when saving an invalid sql code
Fix misspelling Data source type label.
The name of the default value in the checkbox parameter was changed by "val" to match with model.
Fix DB Conn issue - translate the wrong message to Spanish.
Fix DB Conn issue - when set a wrong ip
Fix labels without internationalization.
Fixed error messages that were not being displayed properly.
Fixed bugs about security manager permission: Display locations according to the role assigned to the user.
Display the Customer tab to User group permission.
Hidden add pre-report.
Execute DD from the History.
Allow to map pre defined reports to SOMS.
Allow to delete a unused Location.

• mes15_sanm.mesweb.central.view-1.01.141121
Location module
Data source module
Report module (publish and pre-defined reports functionalities only)
Report groups module
User module

• MES15_MESWeb.4.1.1.011215
Scheduler Snapshots.
RTY Report.
Predefined reports for pcb(fit wip report,pcb Unit history).
Second grouping level to Wip distribution.

•MES15_MESWeb.4.1.2.020515
The problems with Workstation Monitor report.
Parameter Rate failed with decimals.
Target was calculated bad and the colors.

• MES15_MESWeb.4.1.3.030215
Customer mapping to show only the available part numbers.
Header for Measurement on Unit History.
Customer mapping to show only the available part numbers.
Line filer parameter.
Customer drop down list parameter.
RTY process global process.
Timezone for Top defect evolution and Yield evolution reports.

•MES15_MESWeb.4.1.4.032315

Formatting excel columns on custom reports.
long workstation parameter.
Export in Yield & Defect report.
Timezone for parameter selected on exports.

• MES15_MESWeb.4.1.5.032515
Issues with schedules, the issues was that it didn't save the files in a ftp server.
Timezone for parameter selected on exports.
Field file name in schedule was modified to allow put the current date also it is able to put only a part of a current date.
Condition way to get the component on unithistory.Component class.
SnapShotDateTime
In HourValue and MinuteValue, the date was initializing in the milliseconds instead of Hour/minute. Set methods were changed.
SnapShotDateRange Seconds was hardcoded to 0.

• MES15_MESWeb.4.1.6.051515
Validation to avoid nulls values in the file's name.

•MES15_MESWeb.4.1.7.052215
Unit history measurement updated to add new columns.
PCB Unit history With eng. notes and instructions.
Yield and defect dates issue.
External and Internal application working with the same files configurable from the database.
Export excel 2007 working to all reports

• MES15_MESWeb.4.1.8.071015

Be Cell Print MFG Report.
Container Pick list Report.
Monitoring resources with javamelody.
Save execute reports as Sanapshot and schelude in the activity database.
Yield and defect dates issue.
Change Export to excel 2007.

• MES15_MESWeb.4.1.9.072215
The CheckBoxParameter class in the com.sanmina.mesweb.core.context package was removed , now the reports are using the CheckBoxParameter class in the com.sanmina.mesweb.core.context.reports package, this changed is to have the same core project in central and execution.
Set the application timezone when the datasource is a postgres database.

• MES15_MESWeb.4.1.10.080615
The date was added at file's name when the all reports when are exported.
The action column was added correctly on the Yield & Defect report.
Set the application timezone when the datasource is a postgres database.
Fixed Lot Unit History.
Fixed problem when the Container Number not exists, exception was captured.
The JsonProperty "moduleSelect" was added to validate if the serials are containers, lots or pallets in client side and can show the correct information.
The method "exportToExcel2007" was added to RTY report.
The total yield field is calculated correctly in the export method to RTY report.
In the export method to RTY report was added the cell to show the product when the report is filter by Global Process/Product or Local Process/Product.
Custom format to the CSV export to the Unit History report.

For Legacy v6.3:

• sfdc3-6.3-02

WR#189486: Multi-threading and consolidated testing for SFDC 6.1
SR#2740821: MESWEB: Wrong History display (activity.i1 issue)

• sfdc-db-schema-6.3-01

WR#189486: Multi-threading and consolidated testing for SFDC 6.1

• sfdc-collector-gui-6.1-02
Compatible with project Xcellerator, no code change

• sfdc-webservice-1.4-22

Compatible with project Xcellerator, no code change

• autosfdcxml-2.14-08

Compatible with project Xcellerator, no code change

• sfdc-batchprocess-gui-6.1-02

Compatible with project Xcellerator, no code change

• sfdc-local-web-6.1-03

Compatible with project Xcellerator, no code change

• sfdc-command-gui-6.1-02

Compatible with project Xcellerator, no code change

• sfdc-install-1.0-04

Compatible with project Xcellerator, no code change

May 2015

Improvements/Bug Fixed:

MES Portal Side:

• mes15_mlc-maintenance-1.4.150421-1
SR#2695567: Cannot print a container # via Label Engine system.

SR#2694225: Container loses its revision when it is opened and closed.
Mantis#26926: Container loses its revision when it is reopened and closed.
Open and Close a Container without touching its elements.
Print Label Engine label by Multi-level Container.

Container Browser performance enhancements.

P23191 PG COPS Replacement - Export Container file format review. New logic for Order Line information based on Business Model (ATO, and Non-ATO).

• mes15_shop-order-control-1.4.1500421-1
Mantis#26929: Some Serial Numbers cannot be printed on the Shop Order Browser.
Print MDS Label by Shop Order Browser.

Refactored the delete unstarted units and delete shop order features to be unit archive aware.

P23191 PG COPS Replacement:

• Add Manual Sales Order Request Feature
• More Information on Sales Order Information
• Changed the WIP Traveler Report to fit on the requirements.

• mes15_sfdc-portlet-1.11.7.150414-1
WR#189508: Multi-language support for sfdc portlets
WR#189082: [Agile/MES Integration] Cover Page and Deviation Mapping for BE
WR#187446: [Agile / MES Integration] To Support Unit QTY for Deviation
WR#187304: [PCB] Engineering Notes for Independent Route Option
WR#187159: [PCB] Support to Display Work Order Units for Rework Step
WR#186644: [PCB] To Support Engineering Notes Mapping under Route Independence
WR#186460: [PCB] Engineering Notes History For MESWEB
SR#2623725: Emulator display all locations
Mantis#26406: sfdc portlet System Information widget, 'MDS' label change to 'IP'"
Mantis#0026421: Upload PDF by URL - Fail to Save
Mantis#0026379: Task Scheduler will remove all created tasks after one task has been executed or updated
Mantis#26394: Historical Yield/Defects doesn't show date range
Mantis#0026383: Label Display Issue
Mantis#0026379: Task Scheduler will remove all created tasks after one task has been executed or updated
Mantis#26394: Historical Yield/Defects doesn't show date range
Document Mapping By Agile Release Date.
Hourly sync job - provide the function on "Download& Service" under SFDC portlet to manually execute syncing
Hourly sync job - support to show the sync backend log at "System Logs" under SFDC portlet.
Deviation time based - By Agile Deviation Number when mapping start/end date are empty
By Agile Deviation Number - Mapped deviation Mark as mapped as in By Agile Release Date option, the lack of this same function allows to map the same deviation multiple times.

• mes15_sfdc-config-1.3.150421-1
SR#2652325: Product Route-Cannot see Location List
SR#2546899: Assembly Export to .csv
Mantis#26774: Shop Floor ID lists all Shop Floor clients for all sites. Should be a filtered list.
Shop Floor ID: Added a logic to ensure that a user can only update the SFDC clients assigned to MDS database of the current logged site.
Added a loading mask for the combo-box fields and improved the code to get locations for multiple source fields all at once.
Assembly Maintenance bug fix for assembly export functionality and added support to Custom Command type.

Route Maintenance: Fixed an issue that prevented the user from adding sub-route steps.
Attribute Maintenance enhancements on Copy window and reset.
Data Collector bug fix in the main grid paging.
Record Component business logic review.
Revision Change enhancements. Fixed wrong messages on Summary section.
Defect Code bug fix in the import routine when a desired file has one of the following characters: “[]\\^$.|?*+(),”

Fixed T460: The Component Mask Validation is case sensitive, and by definition, Component IDs are upper case. The system must make the input all upper case automatically.

• mes15_portal_portlet-setting-hook-1.11.3.150326-1
WR#185572: Alpha or non numeric character supported at Oracle
WR#186872: Support Configurable Email Server
WR#187927: To Support to deactivate User if Supervisor Empty
Mantis#26595: Assigned users are removed from the site sometimes
Add audit report when session expired or user logout.
Improve web path get method.

• mes15_portal_mes-portal-db-schema-upgrade-1.10.6.150122-1
PTS failed to add sever at server information portlet.

• mes15_portal_server-information-1.11.2.150311-1
WR#189078: SFDC Uniqueness Control under Server Info.
WR#186078: [Agile/MES Integration] To Support External Agile Server.
Mantis#0026570: Check SFDC status can't display in status field.

• mes15_portal_mes-migration-1.11.1.150213-1
WR#185572: Alpha or non numeric character supported at Oracle

• mes15_portal_user-maintenance-1.11.3.150323-1
WR#185572: Alpha or non numeric character supported at Oracle.
WR#188124: Impersonating User Failure.
Mantis#26640: Search user shouldn't distinguish uppercase and lowercase.
Mantis#26595: Assigned users are removed from the site sometimes.

• mes15_portal_site-maintenance-1.11.4.150331-1
WR#189077: Portal Profile should Apply to New Site
WR#189078: SFDC Uniqueness Control under Server Info
WR#184595: MESWEB Link no Overwriting when Synnchronizing Site
WR#189077: Portal Profile should Apply to New Site
Mantis#26595: Assigned users are removed from the site sometimes (enhance add site logic)
Delete missing pages when syncing sites

• mes15_portal_patch-1.11.4.150409-1
Support multiple porltet title.

• mes15_mlc-configuration-1.4.150419-1
SR#2689309: Copy Multi-level Container Configuration keeps the reference to the original dimension table.
Mantis#26922: Multi-level Configuration > Copy the Container Config > Dimensions must not be changed.
Copy Multi-level Container Configuration keeps the reference to the original dimension table.
Fixed a dimension’s form layout on Container Configuration form.

• mes15_serialized-item-tracker-1.4.150421-1

IR: Important performance enhancements.

Added support to SFDC Attributes and new its Mask (Data Type) validation on Receiving SN range.

• mes15_portal_profile-maintenance-1.11.4.150416-1

SR#2691080: Increase Ajax connection timeout, fix possible define permissions page show blank.
Add exception catch for web action (to print log for profile operations).

SFDC PC Side:

• mes15_sfdc-sfdc-1.11.7.150403-1
WR#183757: Xcellerator - Multi-threading changes
WR#186518: Consolidate upload commands development and test
SR#2621853: When using Cirrus portal Part change function created duplicate s/n"
WR#186519: EMVDNLD and Socket Log changes."
WR#178127: DTC IN USE.
WR#181620: Login Reset for SFDC v1.10.
WR#182742: SFDC holds all PNs when SPC monitor sends SPC Hold.
WR#186804: Re-build packages to v1.11
Mantis#0026218 NON serialize batch qty error after sfdc dnld empty."
Mantis#0026456 System time couldn’t get updated when doing SFDC restart.
Mantis#0026253 MERGBSN action record display in wrong way.
Fix the upload order issue, including the functions of uphpu, upSampleLog, upSamplePlan.
Resolve the network problem.
Change the interface to muti-line mode for !!command.
Removed the logic of non-serialized batch automatically calling SPLTNBSN.

• mes15_sfdc-db-schema-1.11.7.150120-1
WR#186519: EMVDNLD and Socket Log changes.
WR#186518: Multi-threading and consolidated up command changes
WR#186804: Re-build packages to v1.11

• mes15_sfdc-webservice-1.11.7.150305-1
WR#188711: [MES Android] APK Issue List Follow up and Fix
WR#186519: EMVDNLD and Socket Log changes
WR#186804: Re-build packages to v1.11
WR#186395: [PCB] To Support Location Description for Each location
Mantis#26432 EV Expiration Date Mismatch
Mantis#0026326 Socket log is empty
To fix the issue of APK: poor performance. Description: when scanning serial number at APK side, "Wait!" message for 1 or 2 minutes.

• mes15_sfdc-tomcat-log-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-autosfdc-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-install-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-nagios-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-sanm-repo-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• mes15_sfdc-sudo-patch-1.11.7.150120-1
WR#186804: Re-build packages to v1.11

• PTS Web Service v2.0.8.1.150206-1

New version bug description:
Mantis#0026376: The Replace Bar-code display information does not match with the real situation.
Mantis#0026387: The Feeder type history feature does not work properly.

January 22 2015

OVERVIEW: CR#xxxxx - Patch release - MES15 SFDC Version 1.10. This release may be used by all non-medical plants.

New feature:

• SR#2612362: eManual doesn't display docs - Cirrus Portal
• SR#2621853: When using Cirrus portal Part change function created duplicate s/n

SFDC PC rpm Package:

• mes15_sfdc-sfdc-1.10.7.150122-1.i386.rpm

Step 1: yumconfig
- Enter YUM FTP Server IP, [172.18.72.200]: 172.18.72.200
- Enter YUM FTP Server User Name, [sfdc3]: sfdc3
- Enter YUM FTP Server Password: ******
Step 2: sfdc3 stop
Step 3: rpm -e --nodeps mes15_sfdc-sfdc
Step 4: yum clean all 
Step 5: yum install mes15_sfdc-sfdc-1.10.7.150122-1
Step 6: sfdc config
Step 7: sfdc dnld (also attribdnld and emvdnld if needed)
Step 8: sfdc start

SFDC Portlet rpm Package:

• mes15_sfdc-portlet-1.10.7.150109-1.i386.rpm
  

Step 1: rpm -qa|grep MES15_SFDC_portlet (to check if there is any old sfdc-portlet rpm packages installed with MES15 prefix)
Step 2: rpm -qa|grep mes15_sfdc-portlet (to check if there is any sfdc-portlet rpm packages installed with mes15 prefix but are not latest)
Step 3: rpm -e --nodeps MES15_SFDC_portlet (or rpm -e --nodeps mes15_sfdc-portlet, if the server installs mes15 version of sfdc-portlet)
Step 4: <wait for about 1 minute for liferay to clean up garbage of the old package>
Step 5: yum clean all
Step 6: yum install mes15_sfdc-portlet-1.10.7.150109-1

January 02 2015

OVERVIEW:: CR#45090 - Production Release of MES15 [1.3.141113-1.i686] - Upgrade Cirrus production environments with latest code releases: Improvements and Bug Fixes.

Improvements/Bug Fixed:

MES Portal Side:

mes15_portal_application-version

• Supported multiple language for all functionality;
• mes15_portal_cas-mesportal-database-support;
• Non-LDAP user will be locked when keyin wrong password for 3 times. 15 minutes later, once correct password keyin, system still allow to login;

mes15_portal_audit-report

• Enhanced audit report to show records correctly;
• Supported multiple language for all functionality;

mes15_portal-device-maintenance-portlet

• Supported Station ID and Device ID Selection on Android apk for PCB project;

mes15_portal_vertical-menu-theme

• Supported multiple language for all functionality;
• Assign user page. Line / Page control;

mes15_portal_server-information-hook

• Supported multiple language for all functionality;
• Supported document mapping with plant's NAS drive for PCB project;

mes15_portal_portlet-setting-hook

• Prohibited automatic account creation in portal;
• Supported multiple language for all functionality;
• Supported customized Cirrus Logo and customer logo;
• Enhanced external customer supervisor email address;

mes15_portal_profile-maintenance

• Supported multiple language for all functionality;
• Supported site admin to assign Portal profile to their site user;
• Show Profile Name when Assigning User;
• Assign user page. Line / Page control;

mes15_portal_server-information

• Supported multiple language for all functionality;
• Supported document mapping with plant's NAS drive for PCB project;
• Encrypted password when adding Agile_Account Server;
• Supported PTS HTTPS web services link;

mes15_portal_user-maintenance

• Supported to view profiles which are already assigned to the user;
• Supported to impersonate site user for Site admin;
• Supported multiple language for all functionality;
• Assign user page. Line / Page control;

mes15_portal_site-maintenance

• Supported multiple language for all functionality;
• Removed site admin check box from site maintenance;
• Supported customized Cirrus Logo and customer logo;
• Assign user page. Line / Page control;

mes15_portal_mes-welcome

• Supported multiple language for all functionality;

mes15_portal_plant-maintenance

• Supported Outside Customer in one MES Portal including SANM and non-SANM plant;
• Supported multiple language for all functionality;

mes15_portal_mes-migration

• Supported import user from xls or csv file;
• Supported multiple language for all functionality;

mes15_mlc-configuration

• Fixed a dimension's form layout on Container Configuration form;

mes15_mlc-maintenance

• Added support to pallet sheet printing;
• 180152(WR) [Measurement] E55 BloodHound / Custom Containerization App;

mes15_serialized-item-tracker

• Fixed "Add Attribute" activity wrong attribute number inforamtion;
• Fixed serial number sort in every screen;

mes15_sfdc-config

• Attribute Maintenance: Enhancements on Copy window and reset;

• Assembly Maintenance: Fixed a bug (SR# 2546899) on assembly export functionality;

• Data Collector: Fixed a bug in the main grid paging;

• Record Component: Business Logic review;

• Revision Change: Usability enhancements. Fixed wrong messages on Summary section;

• Defect Code: Fixed a bug in the Defect Codes's import routine when desired file had one of following chars "[]\\^$.|?*+(),";

mes15_shop-order-control

• Show Operation Sequence's Op Code information on Shop Order portlet;

• Shop Order Information, new file for "User Defined";

mes15_Sanm.MESWeb.Central.View

Administration Module: the administrator user is able to manage the following sub-modules:

• Location Maintenance:

This module allows Administrators to add, edit, or delete locations. Also located in this module is the ability to add, edit, or delete server names;

• Data Source Maintenance:

This module allows the Administrator to add a data source based on the name, description, location, database type, and connection parameters associated to the database type;

• Reports:

The Reports Module was developed for employees with Security Manager (specific Location) and Administrator (all locations) roles. The Reports module allows the user to edit copy or publish reports;

• Report Groups:

With this module the Administrator and Security Manager users can access report group maintenance to perform searches, create, edit or delete report groups and add reports to groups;

Access Control Module: the Access Control module was developed for employees with Administrator and Security Manager roles. With the Access Control module, the Administrator is able to search, add, delete or edit users or user groups;

• User Maintenance:

This module allows Administrators to manage user permissions and edit user information. With this portlet, administrators can assign Administrator permissions to specific users for assigned locations and edit the user’s information;

mes15_sfdc-portlet

• Support 'DTC in USE' message in Cirrus version;
• Support PCB plant using Cirrus, enhance SFDC non-serialized batch behavior to support PCB business needs;
• Ehnance Batch Process GUI to handle over 10,000+ active downloaded SOs;
• Security Improvement per HPFOD;

• SFDC LOGOUT command will still auto-login;
• Default Document Display Not Work;
• Fixed issue of process field not filtered by part number on document upload page;
• Download and Services portlet - Download option out of order;

mes15_quality_spc-portlet, mes15_spc-tv-db-schema

• Language Bundle - add support [Spanish, Chinese ,English];
  
• No any response when export lock list to excel;
• The save button can be clicked without inputting any information in the Add Monitor Group page;
• "rules" isn't translated in Create Monitor;
• The Chinese interface is inconsistent with the English interface;
  

SFDC PC Side:

mes15_sfdc-sfdc

• Support 'DTC in USE' message in Cirrus version;
• Support PCB plant using Cirrus, enhance SFDC non-serialized batch behavior to support PCB business needs;
• Enhance SFDC local attribute commands and support NEXT command;
• Ehnance Batch Process GUI to handle over 10,000+ active downloaded SOs;
• SFDC issue with underbar characters in location name;
• Make the changes for Unique component as the same with non-tracked;
• MFG hold issue;
• EV Auto Logout at Shift End not call uphpu;
• Container Qty issue;
• Non-serialized batch miss saving data when recording defect;
• Display "Invalid Entry" for invalid defect code -1;
• SFDC holds all PNs when SPC monitor sends SPC Hold;
• Call PTS ID return Invalid Entry error message when Add component;

mes15_sfdc-db-schema

• Increase route.name column size in SFDC;
• Create a unique index on component table for batch quantity issue;

mes15_sfdc-webservice

• Support PCB plant using Cirrus, enhance SFDC non-serialized batch behavior to support PCB business needs;
• Ehnance Batch Process GUI to handle over 10,000+ active downloaded SOs;
• Fixed Manual Moves issue in SFDC Portlet;
• Fixed issue of document not display on start process;

mes15_sfdc-sudo-patch

• Re-build packages according to the new naming conversion;

mes15_sfdc-autosfdc

• Re-build packages according to the new naming conversion;

mes15_sfdc-sanm-repo

• Re-build packages according to the new naming conversion;

mes15_sfdc-nagios

• Re-build packages according to the new naming conversion;

mes15_sfdc-install

• Re-build packages according to the new naming conversion;

mes15_sfdc-tomcat-log

• Re-build packages according to the new naming conversion;

tomcat-7.0-47.01

• Re-build packages according to the new naming conversion;

SPC Server Side:

mes15_quality_spcdbconfig

• Code change per HPFOD;
• Defects are repeated calculated in a short time;
• Two SPC data displayed in the same revision after edit this monitor;
• One revisions includes all the month's input data after collect CPK/PPK by month via manual input type;
• In the Pareto chart, user sees a No Records on the Exception tab after clicked the Affected SNs button;
• Issues of saving 'Hide monitors with no data in chart in the past(hours)' on 'Spc System Parameter;
• When Collection by Time, System sends out emails before the time interval ends;
• Monitor list page can't load filter number;

mes15_quality_spc-server

• Single SPC server supports multiple plants;
• Tomcat hot deployment and undeployment technique;
  

 

December 2014

OVERVIEW: New Features, Enhancements and Bug Fixes. This release is targeted for those of plants who already runs on Cirrus Amazon cloud for non-medical. It can not be used for plants to upgrade directly from early version of SFDC to Cirrus version.

New Features:

• WR#173808 Non-serialized Batches Changes for PCB
• WR#180153 [PCB] Multilogin NSB requirements
• WR#178127 No DTC in use message

Enhancements:

• WR#184672: [PCB] To Support to Display Available QTY for each Station
• WR#183272: Location Key written into unit_Status-key
• WR#182420: [PCB apk] Defect Code Order Change
• WR#181622: SFDC Local Attribute Commands
• WR#181163: [PCB] Change to operationSpltNBSN and createseqsonum
• WR#179650: Package Name Change per Name Convention
• WR#175752: Container Qty issue
• WR#185759: [SFDC] Wrong Message for Fail to and Pass to Prompt
• WR#180755: Batch Process GUI enhancement
• WR#184777: Auto Login issue with EV enabled
• WR#184327: [Agile/MES Integration] Deviation integration in Cirrus.APK Beta Version
• WR#184233: [PCB] Error message for Item status not active
• WR#182742: SFDC holds all PNs when SPC monitor sends SPC Hold
• WR#184120: [PCB] Non-serialized batch miss saving data when recording defect
• WR#183912: Display "Invalid Entry" for invalid defect code -1
• WR#182419: [SFDC] Bugs - Local Attribute Commands
• WR#182191: [PCB] Fix Multilogin requesting the Quantity Twice
• WR#180153: Autocmd gets executed prior to prompt split, and SFDC exits the loop for current SN transaction when manually enter 'SPLTNBSN' command
• WR#179076: EV Auto Logout at Shift End not call uphpu
• WR#183544: MES/Agile Deviation integration in Cirrus.APK (Phrase 2)
• WR#183268: Station ID based on SFDC Host to APK.
• WR#183051: [Agile/MES Integration] Deviation Cover Page action in XML format
• WR#180754: Security Improvement - HPFOD
• WR#182669: [PCB] Engineering Notes not Display
• WR#182322: [PCB] Auto Mapping with Plant's Network Drive
• WR#182245: [PCB] Date & Time on the header Interface Change
• WR#182192: [PCB] Document Mapping Portlet changes with shop order optional
• WR#182195: [PCB] Unit ID Selection Bug Fix
• WR#181618: [PCB] To Support Station ID and Device ID Selection on Android apk
• WR#179529: [PCB Project] Json Interface for call to MDS from APK
• WR#179900: Task scheduler changes
• WR#179528: [PCB Project] To Support to Document Mapping with Plant's Drive (cont.)

Bug Fixes:

• Mantis#0026176: Emulator - Show 'DTC in Use' after sfdc restart
  
• Mantiss#0026154: SN be in complete status, it can be scan in any location in the route
  
• Mantis#0025861: Call PTS ID return Invalid Entry error message when Add component
  
• Mantis#0025290: Return Connection to pts error after PRCDFC command
  
• Mantis#0025953: PCB multi-login issue
  
• Mantis#0025621: [PCB] SFDC shows 'Wrong Quantity' when splitting non-serialized batch
  
• Mantis#25612: [PCB] SFDC couldn’t select non-serialized batch with quantity over than 100
  
• Mantis#25547: [PCB] Login Reset
  
• Mantis#25295: PCB - Non-serialized batch issue
  
• Mantis#0025291: Route by Process changes for Flow error issue
  
• Mantis#24997: No Flow Control
  
• Mantis#25048: SFDC issue with underbar characters in location name
  
• Mantis#25106: minor conversion issue in SFDC 7(loc_date field still exist in OperationCntnr.java)
  
• Mantis#25104: Remove or replace unique component need to call upcomp2.p function
  
• Mantis#25105: Make the changes for Unique component as the same with non-tracked
  
• Mantis#25234: MFG hold issue
  
• Mantis#0026092 SFDC doesn't show DTC in Use when user switching to unit ID.
• Mantis#0026091 DTC IN USE - Autologout doesn't take effect
• Mantis#0026080 User fails to update document parameter
• Mantis#0026047 SFDC LOGOUT command will still auto-login
• Mantis#0026045 Default Document Display Not Work
• Mantis#0026026 Process Flow Section Issues
• Mantis#0025963 Return HTTP Status 500 exception when export excel from system log.
• Mantis#0025935 process not be filter by part number
• Mantis#0025842 Batch Process is temporarily unavailable
• Mantis#25504: Batch process ID are missing for test automation
• Mantis#0025383 Download and Services portlet - Download option out of order.

SFDC PC rpm Packages:

• mes15_sfdc-db-schema-1.10.4.140923-1.i386
• mes15_sfdc-autosfdc-1.10.2.140819-1.i386
• mes15_sfdc-sudo-patch-1.10.2.140819-1.i386
• mes15_sfdc-tomcat-log-1.10.2.140820-1.i386
• mes15_sfdc-nagios-1.10.2.140820-1.i386
• mes15_sfdc-sanm-repo-1.10.2.140820-1.i386
• mes15_sfdc-sfdc-1.10.7.141230-1.i386
• mes15_sfdc-webservice-1.10.7.141219-1.i386
• mes15_sfdc-install-1.10.2.140820-1.i386
• tomcat-7.0-47.01.i386
  

Step 1: yumconfig
- Enter YUM FTP Server IP, [172.18.72.200]: 172.18.72.200
- Enter YUM FTP Server User Name, [sfdc3]: sfdc3
- Enter YUM FTP Server Password: ******
Step 2: rpm -qa|grep MES15 (to check if there is any old rpm packages installed with MES15 prefix)
Step 3: rpm -qa|grep mes15 (to check if there is any rpm packages installed with mes15 prefix but are not latest)
Step 4: rpm -qa|grep tomcat (to check tomcat version)
Step 5: sfdc3 stop

If target PC has MES15 packages installed, remove them with following section of steps:

Step 6: rpm -e --nodeps MES15_SFDC_sfdc MES15_SFDC_db-schema MES15_SFDC_webservice MES15_SFDC_autosfdc
Step 7: rpm -e --nodeps MES15_SFDC_sudo-patch MES15_SFDC_tomcat_log MES15_SFDC_install MES15_SFDC_nagios MES15_SFDC_sanm-repo

If target PC has mes15 packages installed, remove them with following section of steps:

Step 6: rpm -e --nodeps mes15_sfdc-sfdc mes15_sfdc-db-schema mes15_sfdc-webservice mes15_sfdc-autosfdc
Step 7: rpm -e --nodeps mes15_sfdc-sudo-patch mes15_sfdc-tomcat-log mes15_sfdc-install mes15_sfdc-nagios mes15_sfdc-sanm-repo

If target PC has installed tomcat with version under tomcat-7.0-47.01, remove it with following steps:

Step 8: rpm -e --nodeps tomcat

Execute below steps to install latest SFDC packages:

Step 9: yum clean all 
Step 10: yum install tomcat-7.0-47.01 (Skip if tomcat is already with 7.0-47 therefore didn't get removed in step#8)
Step 11: yum install mes15_sfdc-sfdc-1.10.7.141230-1 mes15_sfdc-db-schema-1.10.4.140923-1 mes15_sfdc-webservice-1.10.7.141219-1 mes15_sfdc-sudo-patch-1.10.2.140819-1
Step 12: yum install mes15_sfdc-autosfdc-1.10.2.140819-1 mes15_sfdc-sanm-repo-1.10.2.140820-1 mes15_sfdc-nagios-1.10.2.140820-1 mes15_sfdc-install-1.10.2.140820-1 mes15_sfdc-tomcat-log-1.10.2.140820-1
Step 13: sfdc config
Step 14: sfdc dnld (also attribdnld and emvdnld if needed)
Step 15: sfdc start

MES15 Portal 1.0 SFDC-Portlet rpm Package:

• mes15_sfdc-portlet-1.10.7.141229-1
  

Step 1: rpm -qa|grep MES15_SFDC_portlet (to check if there is any old sfdc-portlet rpm packages installed with MES15 prefix)
Step 2: rpm -qa|grep mes15_sfdc-portlet (to check if there is any sfdc-portlet rpm packages installed with mes15 prefix but are not latest)
Step 3: rpm -e --nodeps MES15_SFDC_portlet (or rpm -e --nodeps mes15_sfdc-portlet, if the server installs mes15 version of sfdc-portlet)
Step 4: <wait for about 1 minute for liferay to clean up garbage of the old package>
Step 5: yum clean all
Step 6: yum install mes15_sfdc-portlet-1.10.7.141229-1

November 14 2014

OVERVIEW:: CR#44764 - Production Release of MES15 [1.3.141113-1] - Deployment of updated code to support E90 COPS Migration to Production.

Improvements/Bug Fixed:

MES15_MLC-Configuration

• i18n support.
• Fixed a dimension's form layout on Container Configuration form.

MES15_MLC-Maintenance

• i18n support.
• Added support to pallet sheet printing.
• Fixed a bug on containerization warning sounds player (and icon).

MES15_Serialized-Item-Tracker

• i18n support.
• Fixed "Add Attribute" activity wrong attribute number information.
• Fixed serial number sort in every screen.

MES15_SFDC-Config

• Attribute Maintenance:
  • Enhancements on Copy window and reset.
• Assembly Maintenance:
  • Fixed a bug (SR# 2546899) on assembly export functionality.
• Data Collector:
  • Fixed a bug in the main grid paging.
• Record Component:
  • Business Logic review.
• Revision Change:
  • Usability enhancements. Fixed wrong messages on Summary section.

MES15_shop-order-control

• i18n support.
• Show Operation Sequence's Op Code information on Shop Order portlet.
• Shop Order Information, new file for "User Defined".

July 25 2014

OVERVIEW:: CCN#xxxxxx - Production Release of MES15 [1.9.140725-1] - deployment of Enhancements and Bug Fixes.

MES15_SFDC

Improvements/Bug Fixed:

• When installing SFDC portlet, the ftp service is already installed as dependency;

• Bug fixed for display documents (uploaded pdf) in Chrome. The bug has been fixed by removing the Mozilla specific function from docview.js that's under sfdc-portlet/js/emulator/;

• Task Scheduler pop-up error box updated: removed the non-sense "Please addundefinedportlet!" popup message when user selects a shop floor ID from the Task Scheduler portlet;

• Fixed an edge case on the Batch Process portlet: when employee number is 0 the Login popup displays "Please wait" message forever until user navigates away from the page, or close the browser;

• Batch process login "sucessfully" spell mistake updated: changed the wording from 'sucessfully' to 'successfully';

July 08 2014

OVERVIEW:: CCN#xxxxxx - Production Release of MES15 [1.2.140708-1] - deployment of new functionalities, feature requests, Enhancements and Bug Fixes.

mes15_mlc-maintenance

Improvements:

• Performance Enhancements;
• Layout Enhancemets;

mes15_gen-attribute-maint

New Feature:

• Added Support for non-project table generic attributes.
• FIX: Allowed Generic Attributes with GenAttrDefinition but no GenAttr record to be shown in the form to be added.

mes15_serialized-item-tracker

New Feature:

• [WR176395] New generic attribute (project:receive_sit_range_default_optional_attributes) that will control which attributes will prompted when receiving a serial number range in SIT. The default attributes are "LOT Code, Date Code, MPN". These attributes can be added to, removed, or replaced with new attribute values. Default attribute values will be comma separated items, allowing for multiple default attributes to be configured.

Bug Fixed:

• [WR176395] Fixed "add attribute" activity param when receiving a serial number range in SIT.

mes15_sfdc-config

Bug fixing:

• Comp location key remains when changing assembly type General Enhancements on Mfg Hold and Revision Change;

Improvements:

• Layout Enhancements;

mes15_shop-order-control

New Feature:

• [WR176182] New Generic Attributes (shop_order:oracle_release_default_options and shop_order:standard_release_default_options) that will control which options are checked by

default in Shop Order Release Wizard. Available options: "create_skl, non_sn_batch, def_rev, def_order_line, def_usl, print_label, create_file, create_notes, print_unit_trav, print_wip_unit_trav, print_order_trav, link_so";

Bug Fixing:

• Fixed Release Wizard cross browser layout issues;

Improvements:

• Sales Order Browser and Order Line SN Assign enhancement;