SOP-MES0017 Traveler Maintenance

SFDC Configuration Traveler Maintenance Version MES15 Portal 1.0 Work Instruction

This Work Instruction is Sanmina's corporate standard. This document is under revision control. The latest revision is located on SanminaNet. Once printed it is an uncontrolled copy. All alterations to this work instruction require approval. Contact the IT Global Education and Training Department to submit suggested alterations and or updates.

This edition applies to MES15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.

SFDC Configuration Setup

The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.

SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses barcode scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.

The system provides Access Control between the modules of the application, including the portlets of each page. The current version has an SFDC Configuration page which provides access to all pages and their portlets (view, add, edit, delete, print and generate output file).

NOTE: A user only has access to the modules assigned to his/her profile.

Traveler Maintenance

A traveler is a source of information for installing each part for a unit. It provides,

• A view of each unit structure, and control over parts released to the manufacturing floor.
• A list for checking-off parts during the assembly of individual units.
• Improves control of manufacturing workflow and allows for better planning of product assembly.

The Traveler Maintenance application builds and maintains the traveler configurations for orderable part numbers. A traveler configuration is a defined list of parts required to build an orderable unit or an Internally Configured Part (ICP).

Each line item on a traveler is an entry from the General Parts and Bases list. Part numbers can be added or deleted from a traveler configuration depending on the manufacturing procedure required for unit assembly. Any changes to a traveler configuration are pending until approved by engineering personnel and released to manufacturing.

All traveler configurations contain the following information:

• Part Number
• Part Description
• Traveler Configuration Status

To access Traveler Maintenance click on navigate to Shop Floor Control > SFDC Configuration > Traveler.

Figure 1: MES Traveler Maintenance

Traveler Main Page

Figure 2: Traveler Main Page

700px

The main page, called Traveler Maintenance, displays all defined travelers. The user is able to execute the following actions:

Filter results, Edit, Copy, Delete, Print/Export, Release, Exploded View, Indented View, Single Level View and Where Used, Add Traveler, Comparison File and Sign Off portlets.

Traveler Filter

The Filter allows the user to filter results by Traveler Status, Part Number or Part Type.

1. Enter desired criteria into the filter fields and select Filter. The filter results are displayed.

Figure 3: Traveler Filter

700px

2. Click Clear to clear the filter fields.

Add Traveler Configuration

1. To add a traveler, select Add from the Traveler Maintenance page. The Add Traveler Config page is displayed.

Figure 4: Traveler Configuration

700px

2. Enter a part number into the Part Number field. (NOTE: Upon entering three characters into the Part Number field, a drop-down box will appear that auto-generates a list of part numbers consistent with what the user has already entered.)

3. Select Save to finish, or Cancel to abort.

---

Add Part

Once a traveler configuration has been created, the user may now add parts to the list:

1. Click on Add Part button to insert parts to the list.

Figure 5: Add Parts to Traveler Configuration 700px

2. Enter the Part Number using the available filter (part type). Click on Ok to confirm. The part number is now listed under the Traveler Form.

---

Load/Remove from File

This portlet enables the user to specify a CSVfile from which to load or remove parts.
Only valid part numbers can be loaded. If any part numbers are found to be invalid, an error messaged is displayed.

The Load/Remove file format is as follows:

Part Number, Quantity,AddOrDelete

part_number1,3,A

part_number2,1,A

1. To load or remove part numbers from a file, click Load/Remove from File.

Figure 6: Load/Remove from File

700px

2. Select Search under Load/Remove From File. Then navigate to the desired CSVfile and click Ok. The part numbers from the file are now added or deleted (depending on the file data) to the list.

---

Insert Text Line Item

This portlet enables the user to manually add a Text Line Item.

1. To add a Text Line Item, select Insert Line Item in the Traveler Form. A new Text-Line-Item line is created in the Traveler Form List.

Figure 7: Insert Line Item

700px

2. Enter Print Sequence and Quantity by double-clicking the desired field. Enter the values, and then select Update.

3. Enter a comment describing the line item into the Text field.

.

4. Click Update to save the Traveler Configuration, or click Cancel to close the Traveler Details screen and return to the Traveler Config List.

---

Edit Traveler Configuration

This portlet enables the user to edit an existing traveler configuration.

1. To edit, select the desired Traveler Configuration and click Edit. The Traveler Formis displayed for the selected part number.

Figure 8: Editing Traveler – Traveler Form

700px

2. Reference section 1.1.3 Add a Traveler Configuration, as the steps and information are the same.

---

Copy Traveler

This feature allows the user to copy an existing traveler configuration.

1. To copy an existing Traveler Configuration, select the desired configuration and click Copy. The Copy Traveler Config window is displayed.

Figure 9: Traveler Copy with Traveler Form

700px

2. Enter the desired Part Number.

3. Click Save to complete the action (or Cancel to abort). The Traveler Formfor the new part number is displayed. The Traveler Configuration Form has been copied for use with the new part number.

4. Reference section 1.1.3 Add a Traveler Configuration as the steps and information are the same.

5. Click Save to finish, or click Cancel to abort and return to the Traveler Maintenance list.

---

Delete Traveler Configuration

This portlet enables the user to delete an existing traveler configuration. Traveler configurations are only able to be deleted when viewing the Traveler Status Pending display.

1. To delete an existing traveler configuration, select the desired configuration and click the Delete button in the list.

2. Select Yes to delete, or No to abort.

Figure 10: Delete Traveler

700px

---

Release Traveler

This portlet enables the user to release a traveler configuration. A traveler must be released to production prior to use.

NOTE: Once a traveler configuration has been released, it is not possible to edit the details when accessed via the Traveler Status Released display.

1. To release a pending traveler configuration, select the desired configuration and click the Release button. A PDF report is generated.

Figure 11: Traveler Release

700px

Figure 12: Traveler Release Report

Print Traveler

This portelets enables the user to print an existing traveler configuration.

1. To print a traveler configuration, select the desired configuration and click the Print button. A PDF report is generated that the user may print or save.

Figure 13: Print Traveler Configuration

Figure 14: Print Traveler Report

2. Click Save to save, or Print to print the report results.

---

View Traveler Configuration

There are three options for viewing traveler configurations:

• Exploded view displays all associated Print Sequences, Quantities, Part Numbers, and Descriptions. Any underlying traveler configurations queries arereleasedversions.
• Indented view displays all associated Part Numbers, Descriptions and Quantities.
• Single Level view displays all configuration details.

1. To view a Traveler Configuration, select the desired configuration and click the icon for the desired viewing option.

Figure 15: Traveler Viewing

2. When Exploded or Indented are select, a PDF report is generated that the user may print or save. When Single Level is selected a read-only report pops up on the screen for the user to view.

Figure 16: Exploded View Report

---

Figure 17: Indented View Report

Figure 18: Single Read Only View

Where is it Used?

This portlet is used to view a Traveler Configuration by part number. This is useful to view the impact when Traveler Configuration modifications are necessary.

1. To view where a Traveler Configuration is used by part number, select the desired configuration and click the Where Used icon. The List Where Used for Part pop-up displays, showing any traveler configuration using the specified part number.

Figure 19: Where Used

2. Sort by traveler status by selecting the status from the list box and clicking Filter. Only the selected traveler list displays in the Where Used for Part list.

3. To print the List Where Used for Part, selectPrint.

---

Comparison File

This portlet creates a text file that contains the selected traveler(s). This file is used to compare COPS and COPICS BOMs.

1. To compare files, select the desired Traveler Configurations and click the Comparison File button.

Figure 20: Comparison File

File:SOP-5-I-MDS0045-C RA1 MDS MDS Traveler Maintenance 20.jpg

2. The user can Save orOpen the file. The file is created in the destination selected above.

Figure 21: Comparison TXT File

400px

---

Sign Off File

This portlet creates a file for the selected traveler configuration, pending, or released. The text file contains the selected traveler configuration and the corresponding tokens for the configuration.

The file naming convention used is as follows for the part number:

• The first character is "P" for pending and "R" for released.
• Characters 2-7 are the first 7 characters of the part number
• The three character extension is an incrementing value to make the filename unique.

1. To create the Sign Off file, select the desired Traveler Configurations and click the Sign Off File button.

Figure 22: Sign Off File

700px

2. Navigate to the desired location to save the file, and click Save or just selectOpen with and click onOk. The file is created in the destination selected above.

Figure 23: Sign Off TXT File

Appendix

Glossary

Access Control

it is a module that will set the permissions for users and external customers of Sanmina-SCI

administrator

the System Administration has full access - all plants, all reports, all users.

component

A component is a specific piece of data that appears on a label, for example: bar code, part numbers, graphic images, line or text. Hence, label components are broken down into several different types: text, graphic images, MDS database values, or a combination of text and database values.

framework

In software development, a framework is a defined support structure in which another software project can be organized and developed. A framework may include support programs, code libraries, a scripting language, or other software to help develop and glue together the different components of a software project.

SFDC Configuration

The rules used to define how SFDC collects data, provides analysis, controls processing and maintains unit histories

Site Minder

Universal login of Sanmina-SCI

username

the username is the siteminder username (or a partial string)

Document Revision History

Date	Author	Title	Version	Change Reference
09/24/13	Elaine Fonaro	Technical Writer	v 1.0	This is the first revision of MDS Traveler User’s Guide
09/24/13	Ashley Martin	Technical Writer	v 1.0	General review and new screen captures
09/24/13	Elaine Fonaro	Technical Writer	v 1.0	Formatting for WIKI