Difference between revisions of "SOP-MES0002 Assembly Maintenance"

From 42Q
Jump to navigation Jump to search
Line 1: Line 1:
−
[[File:sanmina_logo.png|130px]]
+
[[Image:Sanmina logo.png|130px|Sanmina logo.png]]  
  
 +
<br>
 +
<center>'''SFDC Configuration''' </center> <center>'''Assembly Maintenance''' </center> <center>'''Version MES15 Portal 1.0''' </center> <center>'''Work Instruction''' </center>
 +
<br>
 +
<center>This Work Instruction is Sanmina's corporate standard.</center> <center>This document is under revision control. The latest revision is located on SanminaNet.</center> <center>Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.</center> <center>Contact the IT Global Education and Training Department to submit suggested alterations and or updates.</center>
 +
''This edition applies to MES 15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.''
  
−
<center>'''SFDC Configuration''' </center>
+
<br>  
−
 
 
−
<center>'''Assembly Maintenance''' </center>
 
−
 
 
−
<center>'''Version MES15 Portal 1.0''' </center>
 
−
 
 
−
<center>'''Work Instruction''' </center>
 
−
 
 
−
 
 
−
<center>This Work Instruction is Sanmina's corporate standard.</center>
 
−
 
 
−
<center>This document is under revision control. The latest revision is located on SanminaNet.</center>
 
−
 
 
−
<center>Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.</center>
 
  
−
<center>Contact the IT Global Education and Training Department to submit suggested alterations and or updates.</center>
+
== SFDC Configuration Setup ==
  
−
''This edition applies to MES 15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.''
+
The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.  
  
 +
SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses bar-code scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.
  
 +
The system provides Access Control between the modules of the application, including the function of each screen. The current version has an SFDC Configuration page which provides access to all sub-module pages and their functions (view, add, edit, delete, print and generate output file).
  
−
==SFDC Configuration Setup==
+
'''SFDC Configuration'''
  
−
The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.
+
1. To access SFDC Configuration, navigate to '''Shop Floor Control <nowiki>></nowiki> Configuration <nowiki>></nowiki> SFDC Configuration'''. The main SFDC Configuration and sub modules page is displayed:
  
−
SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses bar-code scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.
+
'''Figure 1: MDS Portal – SFDC Configuration Sub modules'''
  
−
The system provides Access Control between the modules of the application, including the function of each screen. The current version has an SFDC Configuration page which provides access to all sub-module pages and their functions (view, add, edit, delete, print and generate output file).
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 01.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 01.jpg]]
  
−
'''SFDC Configuration'''
+
'''NOTE''': A user only has access to the modules assigned to his/her profile.
  
−
1. To access SFDC Configuration, navigate to '''Shop Floor Control <nowiki>></nowiki> Configuration <nowiki>></nowiki> SFDC Configuration'''.  The main SFDC Configuration and sub modules page is displayed:
+
== Assembly Maintenance ==
  
−
'''Figure 1: MDS Portal – SFDC Configuration Sub modules'''
+
Assembly Maintenance defines the components or sub-assemblies that are merged to a main product. Also defined are the Data Collection Locations where sub-assemblies are merged, and prompts displayed to the operator. Assembly Maintenance tables are configured to perform serial, part, and location validation of items merged to the main product.
  
−
'''
+
==== List Assemblies ====
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_01.jpg|framed|none]]
 
−
'''
 
−
 
 
−
'''NOTE''': A user only has access to the modules assigned to his/her profile.
 
−
 
 
−
===Assembly Maintenance===
 
−
 
 
−
Assembly Maintenance defines the components or sub-assemblies that are merged to a main product. Also defined are the Data Collection Locations where sub-assemblies are merged, and prompts displayed to the operator. Assembly Maintenance tables are configured to perform serial, part, and location validation of items merged to the main product.
 
−
 
 
−
==== List Assemblies ====
 
  
 
Based on the actual SFDC Configuration, the application displays a list of all Assemblies.  
 
Based on the actual SFDC Configuration, the application displays a list of all Assemblies.  
Line 69: Line 53:
 
'''Figure 2: List and Search'''  
 
'''Figure 2: List and Search'''  
  
−
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 02.jpg|frame|none]]  
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 02.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 02.jpg]]  
  
−
The filter result is displayed in the Assembly list.
+
The filter result is displayed in the Assembly list.  
  
 
==== Add Assembly  ====
 
==== Add Assembly  ====
Line 81: Line 65:
 
'''Figure 3: Add Assembly'''  
 
'''Figure 3: Add Assembly'''  
  
−
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 03.jpg|frame|none]]  
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 03.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 03.jpg]]  
  
 
<br> The Assembly form is displayed. The user must populate all mandatory fields when adding assembly steps. If the mandatory fields are not populated, an error message is displayed.  
 
<br> The Assembly form is displayed. The user must populate all mandatory fields when adding assembly steps. If the mandatory fields are not populated, an error message is displayed.  
Line 87: Line 71:
 
'''Figure 4: Add Assembly Form'''  
 
'''Figure 4: Add Assembly Form'''  
  
−
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 04.jpg|frame|none]]  
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 04.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 04.jpg]]  
  
 
3) Select the appropriate location form the '''Location''' drop-down box.  
 
3) Select the appropriate location form the '''Location''' drop-down box.  
Line 101: Line 85:
 
<br>  
 
<br>  
  
−
(NOTE: The user must add at least one step to the Assembly for it to be saved in the system.)
+
(NOTE: The user must add at least one step to the Assembly for it to be saved in the system.)  
  
−
====List Steps====
+
==== List Steps ====
−
This functionality displays a list with all Assembly Steps.
 
  
−
1. To access the Assembly Step menu, the user must first check the box to the left of the appropriate '''Shop Floor ID''', then select '''Step List'''.
+
This functionality displays a list with all Assembly Steps.  
  
−
'''Figure 5: Assembly List – Step List'''
+
1. To access the Assembly Step menu, the user must first check the box to the left of the appropriate '''Shop Floor ID''', then select '''Step List'''.
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_05.jpg|framed|none]]
+
'''Figure 5: Assembly List – Step List'''
  
−
The Assembly Step List displays.
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 05.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 05.jpg]]
  
−
The Assembly Step List enables the following Tasks:
+
The Assembly Step List displays.
  
−
* Add Assembly Step
+
The Assembly Step List enables the following Tasks:
−
* Edit, Copy and Delete
 
−
* Print/Export Filtered Assembly Steps
 
  
−
=====Add Assembly Step=====
+
*Add Assembly Step  
−
This functionality adds an assembly step in the system.
+
*Edit, Copy and Delete
 +
*Print/Export Filtered Assembly Steps
  
−
To add an assembly step, select '''Add Assembly Step '''from the step list screen.
+
===== Add Assembly Step =====
  
−
'''Figure 6: Add Assembly Step'''
+
This functionality adds an assembly step in the system.
  
−
'''
+
To add an assembly step, select '''Add Assembly Step '''from the step list screen.
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_06.jpg|framed|none]]
 
−
'''
 
  
−
The user must populate all mandatory fields (indicated in Red) when adding assembly steps. If the mandatory fields are not populated, an error message is displayed.
+
'''Figure 6: Add Assembly Step'''
  
−
'''Type: '''The type of Assembly Step that is being created. (Non-Tracked, PTS ID, Standard, Unique Component)
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 06.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 06.jpg]]
  
−
'''Step:''' Number automatically generated by the Step Number function.
+
The user must populate all mandatory fields (indicated in Red) when adding assembly steps. If the mandatory fields are not populated, an error message is displayed.  
  
−
'''Component ID Prompt:''' The prompt displayed to the operator upon scanning the main assembly. This prompt should specify the sub-assembly being added to the main assembly. The prompt length can be up to 16 characters. This prompt is only displayed if the sub-assembly has not been previously installed at this station.
+
'''Type: '''The type of Assembly Step that is being created. (Non-Tracked, PTS ID, Standard, Unique Component)
  
−
'''Note:''' If another Location has the same Process Name with the same Assembly sequence AND the main assembly is scanned there (because of a Manual Move), SFDC prompts for the sub-assemblies to be installed even if there were installed previously.
+
'''Step:''' Number automatically generated by the Step Number function.  
  
−
'''Note:''' If the OPTIONS ASM_BY_PROCNAME=YES option is installed in the Setup Data Editor Form, the component prompt is displayed for all Locations with same Process Name that is assigned to the Location in which the assembly is configured.
+
'''Component ID Prompt:''' The prompt displayed to the operator upon scanning the main assembly. This prompt should specify the sub-assembly being added to the main assembly. The prompt length can be up to 16 characters. This prompt is only displayed if the sub-assembly has not been previously installed at this station.  
  
−
'''Component Id Mask:''' The serial mask of the sub-assembly. The maximum length of the data field is 40 characters. The maximum length of a ''single'' ID mask is 20 characters. Multiple ID masks are separated by a comma (,).
+
'''Note:''' If another Location has the same Process Name with the same Assembly sequence AND the main assembly is scanned there (because of a Manual Move), SFDC prompts for the sub-assemblies to be installed even if there were installed previously.  
  
−
'''Reference Designator:''' The reference designator (or nomenclature) of the sub-assembly. This is a text string up to 22 characters in length. When a new Component ID prompt is entered for a step, this data field contains the same default value. The field is editable.
+
'''Note:''' If the OPTIONS ASM_BY_PROCNAME=YES option is installed in the Setup Data Editor Form, the component prompt is displayed for all Locations with same Process Name that is assigned to the Location in which the assembly is configured.  
  
−
'''Component Part:''' The part number of the sub-assembly being added to the main assembly. It must exist in the Part Table and is only needed if the Component ID mask is the same for multiple products.
+
'''Component Id Mask:''' The serial mask of the sub-assembly. The maximum length of the data field is 40 characters. The maximum length of a ''single'' ID mask is 20 characters. Multiple ID masks are separated by a comma (,).  
  
−
NOTE: Once the component part number is entered, the Shop Floor ID field will be available to populate.
+
'''Reference Designator:''' The reference designator (or nomenclature) of the sub-assembly. This is a text string up to 22 characters in length. When a new Component ID prompt is entered for a step, this data field contains the same default value. The field is editable.  
  
−
'''Shop Floor ID- '''The ID of the Shop Floor associated with the assembly step.
+
'''Component Part:''' The part number of the sub-assembly being added to the main assembly. It must exist in the Part Table and is only needed if the Component ID mask is the same for multiple products.  
  
−
NOTE: Once the Shop Floor ID is chosen, the Component Location field will be available to populate.
+
NOTE: Once the component part number is entered, the Shop Floor ID field will be available to populate.  
  
−
'''Component Location:''' Valid only if the sub-assembly is tracked. This is the Location where the sub-assembly is expected to be. Using this data field ensures the sub-assembly is ready to be installed into the main assembly.
+
'''Shop Floor ID- '''The ID of the Shop Floor associated with the assembly step.  
  
−
Once all the required information has been entered, select '''Save'''. To exit, select '''Cancel'''. To clear all fields, select '''Clear.'''
+
NOTE: Once the Shop Floor ID is chosen, the Component Location field will be available to populate.  
  
−
The new assembly step is displayed in the list.
+
'''Component Location:''' Valid only if the sub-assembly is tracked. This is the Location where the sub-assembly is expected to be. Using this data field ensures the sub-assembly is ready to be installed into the main assembly.  
  
−
'''Figure 7: Assembly Step in the list'''
+
Once all the required information has been entered, select '''Save'''. To exit, select '''Cancel'''. To clear all fields, select '''Clear.'''  
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_07.jpg|framed|none]]
+
The new assembly step is displayed in the list.  
  
−
=====Edit Assembly Step=====
+
'''Figure 7: Assembly Step in the list'''
−
This functionality allows modification of any available Assembly Steps. If a mandatory field is not populated, an error message is displayed.
 
  
−
1. To edit an assembly step, select an existing assembly step, then select '''Edit'''.
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 07.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 07.jpg]]
  
−
'''Figure 8: Assembly Step List – Edit'''
+
===== Edit Assembly Step =====
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_08.jpg|framed|none]]
+
This functionality allows modification of any available Assembly Steps. If a mandatory field is not populated, an error message is displayed.  
  
−
The Assembly Step Form page is displayed
+
1. To edit an assembly step, select an existing assembly step, then select '''Edit'''.
 +
 
 +
'''Figure 8: Assembly Step List – Edit'''
 +
 
 +
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 08.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 08.jpg]]
 +
 
 +
The Assembly Step Form page is displayed  
  
 
:2. Edit the necessary field(s) then select '''Save'''.
 
:2. Edit the necessary field(s) then select '''Save'''.
  
−
=====Copy Assembly Step Data=====
+
===== Copy Assembly Step Data =====
−
This functionality allows user to copy data from one assembly step to another.
 
  
−
1. To copy assembly step data, select an existing assembly step, then select '''Copy'''.
+
This functionality allows user to copy data from one assembly step to another.  
  
−
'''Figure 9: Assembly Step List – Copy'''
+
1. To copy assembly step data, select an existing assembly step, then select '''Copy'''.
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_09.jpg|framed|none]]
+
'''Figure 9: Assembly Step List – Copy'''
  
−
The '''Copy Step''' pop-up is displayed:
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 09.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 09.jpg]]
  
−
2. Enter the desired step that will be a copy of the original selected step.
+
The '''Copy Step''' pop-up is displayed:
  
−
3. Select '''Save '''to confirm.
+
2. Enter the desired step that will be a copy of the original selected step.  
  
−
4. The data from the original selected step will be copied to the new step.
+
3. Select '''Save '''to confirm.  
  
−
=====Delete Assembly Step=====
+
4. The data from the original selected step will be copied to the new step.  
−
This functionality deletes the selected Assembly Step.
 
  
−
1. To delete an assembly step, select an existing step, then select '''Delete.'''
+
===== Delete Assembly Step =====
  
−
'''Figure 10: Assembly Step List – Delete'''
+
This functionality deletes the selected Assembly Step.
  
−
'''
+
1. To delete an assembly step, select an existing step, then select '''Delete.'''  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_10.jpg|framed|none]]
 
−
'''
 
  
−
A confirmation message is displayed.
+
'''Figure 10: Assembly Step List – Delete'''
  
−
2. Select '''Yes''' to confirm deletion. Click '''No''' to cancel deletion.
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 10.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 10.jpg]]
  
−
=====Print/Export Filtered Assembly Step=====
+
A confirmation message is displayed.  
−
This functionality prints the current filtered list of steps. The report prints to the default printer for the workstation. The system displays print result information.
 
  
−
1. To print all assembly steps, select '''Print/Export Filtered Assembly Step'''.
+
2. Select '''Yes''' to confirm deletion. Click '''No''' to cancel deletion.  
  
−
'''Figure 11: Print Filtered Assembly Steps'''
+
===== Print/Export Filtered Assembly Step =====
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_11.jpg|framed|none]]
+
This functionality prints the current filtered list of steps. The report prints to the default printer for the workstation. The system displays print result information.  
  
−
A PDF report is generated and the user is able to save the file locally.
+
1. To print all assembly steps, select '''Print/Export Filtered Assembly Step'''.  
  
−
'''Figure 12: Print /Export Step List Report'''
+
'''Figure 11: Print Filtered Assembly Steps'''  
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_12.jpg|framed|none]]
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 11.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 11.jpg]]  
  
−
2. Select '''Save''' to save the report results.
+
A PDF report is generated and the user is able to save the file locally.  
  
−
3. Select '''Print '''to print the report results.
+
'''Figure 12: Print /Export Step List Report'''  
  
−
====Copy Assembly====
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 12.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 12.jpg]]
−
This functionality allows user to copy data from one Local Assembly to another part.
 
  
−
1. To copy Local Assembly to another part, select an existing Assembly, then select '''Copy.'''
+
2. Select '''Save''' to save the report results.
  
−
'''Figure 13: Assembly List - Copy Assemblies'''
+
3. Select '''Print '''to print the report results.
  
−
'''
+
==== Copy Assembly ====
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_13.jpg|framed|none]]
 
−
'''
 
  
−
The Copy Assembly page is now displayed.
+
This functionality allows user to copy data from one Local Assembly to another part.  
  
−
2. Enter the data and then select '''Save'''.
+
1. To copy Local Assembly to another part, select an existing Assembly, then select '''Copy.'''  
  
−
====Delete Assembly====
+
'''Figure 13: Assembly List - Copy Assemblies'''
−
This functionality allows user to delete the selected Local Assembly.
 
  
−
1. To delete Local Assembly, select the Assembly to be deleted, then select '''Delete'''
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 13.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 13.jpg]]
  
−
'''Figure 14: Assembly List - Delete Assemblies'''
+
The Copy Assembly page is now displayed.
  
−
'''
+
2. Enter the data and then select '''Save'''.
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_14.jpg|framed|none]]
 
−
'''
 
  
−
1. A confirmation message is displayed. Select '''Yes '''to confirm or '''No '''to exit.
+
==== Delete Assembly ====
  
−
====Print/Export Assembly====
+
This functionality allows user to delete the selected Local Assembly.  
−
This functionality allows user to generate an output file with the Assembly contents.
 
  
−
1. To export assemblies, select '''Print/Export.'''
+
1. To delete Local Assembly, select the Assembly to be deleted, then select '''Delete'''  
  
−
'''Figure 15: Assembly List - Print/Export Assemblies'''
+
'''Figure 14: Assembly List - Delete Assemblies'''  
  
−
'''
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 14.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 14.jpg]]  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_15.jpg|framed|none]]
 
−
'''
 
  
−
A PDF report is generated and the user is able to save the file or print from an external program.
+
1. A confirmation message is displayed. Select '''Yes '''to confirm or '''No '''to exit.  
  
−
'''Figure 16: Print/Export from List Report'''
+
==== Print/Export Assembly ====
  
−
'''
+
This functionality allows user to generate an output file with the Assembly contents.  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_16.jpg|framed|none]]
 
−
'''
 
  
−
====Print Shop Floor ID Assemblies====
+
1. To export assemblies, select '''Print/Export.'''
−
This functionality allows the user to print or export Assemblies for the selected Line. The report prints to the default printer for the workstation.
 
  
−
1. To print/export SFDC ID Assemblies for the selected SFDC ID, select '''Print SFDC ID Assemblies''' in the menu.
+
'''Figure 15: Assembly List - Print/Export Assemblies'''  
  
−
'''Figure 17: Print SFDC ID Assemblies'''
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 15.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 15.jpg]]
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_17.jpg|framed|none]]
+
A PDF report is generated and the user is able to save the file or print from an external program.  
  
−
A pop-up appears prompting the user to select the appropriate Shop Floor ID.
+
'''Figure 16: Print/Export from List Report'''
  
−
2. Select a Shop Floor ID from the drop down box.
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 16.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 16.jpg]]
  
−
3. A PDF report is generated.
+
==== Print Shop Floor ID Assemblies ====
  
−
'''Figure 18: Print/Export Assembly List Report'''
+
This functionality allows the user to print or export Assemblies for the selected Line. The report prints to the default printer for the workstation.
  
−
'''
+
1. To print/export SFDC ID Assemblies for the selected SFDC ID, select '''Print SFDC ID Assemblies''' in the menu.
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_18.jpg|framed|none]]
 
−
'''
 
  
−
====Print Filtered Assemblies====
+
'''Figure 17: Print SFDC ID Assemblies'''
−
This functionality allows the user to print the Assembly Steps of filtered assemblies. The report prints to the default printer for the workstation.
 
  
−
1. Select the desired filter criteria to obtain desired list of assemblies to print.
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 17.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 17.jpg]]
  
−
2. Select''' Print Filtered Assemblies''' in the menu.
+
A pop-up appears prompting the user to select the appropriate Shop Floor ID.  
  
−
'''Figure 19: Print Filtered Assemblies'''
+
2. Select a Shop Floor ID from the drop down box.
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_19.jpg|framed|none]]
+
3. A PDF report is generated.  
  
−
3. A PDF report is generated.
+
'''Figure 18: Print/Export Assembly List Report'''
  
−
'''Figure 20: Print/Export Filtered assemblies'''
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 18.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 18.jpg]]
  
−
'''
+
==== Print Filtered Assemblies ====
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_20.jpg|framed|none]]
 
−
'''
 
  
−
====Print All Installed Steps====
+
This functionality allows the user to print the Assembly Steps of filtered assemblies. The report prints to the default printer for the workstation.  
−
This functionality allows the user to print all installed assembly steps. The report prints to the default printer for the workstation.
 
  
−
1. To print all installed steps, select '''Print All Installed Steps''' in the Assembly List menu.
+
1. Select the desired filter criteria to obtain desired list of assemblies to print.  
  
−
'''Figure 21: Print All Installed Steps'''
+
2. Select'''Print Filtered Assemblies''' in the menu.
  
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_21.jpg|framed|none]]
+
'''Figure 19: Print Filtered Assemblies'''
  
−
A pop-up appears prompting the user to select the appropriate Shop Floor ID.
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 19.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 19.jpg]]
  
−
2. Select a Shop Floor ID from the drop down box.
+
3. A PDF report is generated.  
  
−
3. A PDF report is generated.
+
'''Figure 20: Print/Export Filtered assemblies'''
  
−
'''Figure 22: Print/Export Installed Assemblies Report'''
+
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 20.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 20.jpg]]
  
−
'''
+
==== Print All Installed Steps ====
−
[[Image:SOP-5-I-MDS0029-C_RA1_MDS_Assembly_Maintenance_22.jpg|framed|none]]
 
−
'''
 
  
 +
This functionality allows the user to print all installed assembly steps. The report prints to the default printer for the workstation.
  
 +
1. To print all installed steps, select '''Print All Installed Steps''' in the Assembly List menu.
  
−
= Appendix A =
+
'''Figure 21: Print All Installed Steps'''
 +
 
 +
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 21.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 21.jpg]]
 +
 
 +
A pop-up appears prompting the user to select the appropriate Shop Floor ID.
 +
 
 +
2. Select a Shop Floor ID from the drop down box.
 +
 
 +
3. A PDF report is generated.
 +
 
 +
'''Figure 22: Print/Export Installed Assemblies Report'''
 +
 
 +
[[Image:SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 22.jpg|frame|none|SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 22.jpg]]
 +
 
 +
<br>
 +
 
 +
= Appendix A =
  
 
{| style="border-spacing:0;"
 
{| style="border-spacing:0;"
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''COPS'''
 
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Customer Order Processing System'''
 
−
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''FES'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''COPS'''
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Factory Execution Systems'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Customer Order Processing System'''
−
 
+
|-
 +
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''FES'''  
 +
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Factory Execution Systems'''
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''MDS'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''MDS'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''New Manufacturing Data System (Java technology)'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''New Manufacturing Data System (Java technology)'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''GLAD'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''GLAD'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Global Administration'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Global Administration'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''LDAP'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''LDAP'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Lightweight Directory Access Protocol'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Lightweight Directory Access Protocol'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Mfg'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Mfg'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Manufacturing'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Manufacturing'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''MES'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''MES'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Manufacturing Execution Systems'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Manufacturing Execution Systems'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''MDS'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''MDS'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Manufacturing Data System'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Manufacturing Data System'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''PRAC'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''PRAC'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Process Access'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Process Access'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''SFDC'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''SFDC'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Shop Data Floor Collection'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Shop Data Floor Collection'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''SPC'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''SPC'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Statistical Process Control'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Statistical Process Control'''
−
 
 
 
|-
 
|-
−
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''SQC'''
+
| style="border-top:0.018cm solid #000000;border-bottom:0.018cm solid #000000;border-left:0.018cm solid #000000;border-right:none;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''SQC'''  
−
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;"| '''Statistical Quality Control'''
+
| style="border:0.018cm solid #000000;padding-top:0cm;padding-bottom:0cm;padding-left:0.191cm;padding-right:0.191cm;" | '''Statistical Quality Control'''
−
 
 
 
|}
 
|}
  
 +
<br>
  
 +
= Appendix B  =
  
−
= Appendix B =
+
'''Glossary'''  
−
'''Glossary'''
 
−
 
 
−
 
 
−
'''''Access Control'''''
 
−
 
 
−
it is a module that will set the permissions for users and external customers of Sanmina
 
  
 +
<br> '''''Access Control'''''
  
−
'''''administrator'''''
+
it is a module that will set the permissions for users and external customers of Sanmina
  
−
the System Administration has full access - all plants, all reports, all users.
+
<br> '''''administrator'''''
  
 +
the System Administration has full access - all plants, all reports, all users.
  
−
'''''component'''''
+
<br> '''''component'''''  
  
 
A component is a specific piece of data that appears on a label, for example: bar code, part numbers, graphic images, line or text. Hence, label components are broken down into several different types: text, graphic images, MDS database values, or a combination of text and database values.  
 
A component is a specific piece of data that appears on a label, for example: bar code, part numbers, graphic images, line or text. Hence, label components are broken down into several different types: text, graphic images, MDS database values, or a combination of text and database values.  
  
 +
<br> '''''framework'''''
  
−
'''''framework'''''
+
In software development, a framework is a defined support structure in which another software project can be organized and developed. A framework may include support programs, code libraries, a scripting language, or other software to help develop and glue together the different components of a software project.
  
−
In software development, a framework is a defined support structure in which another software project can be organized and developed. A framework may include support programs, code libraries, a scripting language, or other software to help develop and glue together the different components of a software project.
+
<br> '''''SFDC Configuration'''''
  
 +
The rules used to define how SFDC collects data, provides analysis, controls processing and maintains unit histories
  
−
'''''SFDC Configuration'''''
+
<br> '''''Site Minder'''''  
  
−
The rules used to define how SFDC collects data, provides analysis, controls processing and maintains unit histories
+
''Universal login of Sanmina''
  
 +
<br> '''''username'''''
  
−
'''''Site Minder'''''
+
the username is the siteminder username (or a partial string)
  
−
''Universal login of Sanmina''
+
<br>
  
 +
== Document Revision History ==
  
−
'''''username'''''
+
{| width="100%" cellspacing="0" cellpadding="4" border="2"
−
 
+
|-
−
the username is the siteminder username (or a partial string)
+
| bgcolor="#00FFFF" align="center" | <font color="#FFFFFF">Date</font>  
−
 
+
| bgcolor="#00FFFF" align="center" | <font color="#FFFFFF">Author</font>  
−
 
+
| bgcolor="#00FFFF" align="center" | <font color="#FFFFFF">Title</font>  
−
==Document Revision History==
+
| bgcolor="#00FFFF" align="center" | <font color="#FFFFFF">Version</font>  
−
 
+
| bgcolor="#00FFFF" align="center" | <font color="#FFFFFF">Change Reference</font>
−
{|border="2" cellspacing="0" cellpadding="4" width="100%"
 
−
|align = "center" bgcolor = "#00FFFF"|<font color="#FFFFFF">Date</font>
 
−
|align = "center" bgcolor = "#00FFFF"|<font color="#FFFFFF">Author</font>
 
−
|align = "center" bgcolor = "#00FFFF"|<font color="#FFFFFF">Title</font>
 
−
|align = "center" bgcolor = "#00FFFF"|<font color="#FFFFFF">Version</font>
 
−
|align = "center" bgcolor = "#00FFFF"|<font color="#FFFFFF">Change Reference</font>
 
−
 
 
 
|-
 
|-
−
|08/07/2013
+
| 08/07/2013  
−
|Elaine Fonaro
+
| Elaine Fonaro  
−
|Technical Writer
+
| Technical Writer  
−
|v 1.0
+
| v 1.0  
−
|This is the first revision of MDS User<nowiki>’</nowiki>s Guide
+
| This is the first revision of MDS User<nowiki>’</nowiki>s Guide
−
 
 
 
|-
 
|-
−
|02/06/2014
+
| 02/06/2014  
−
|Ashley Martin
+
| Ashley Martin  
−
|Technical Writer
+
| Technical Writer  
−
|V 1.0
+
| V 1.0  
−
|Accuracy and new images added
+
| Accuracy and new images added
−
 
 
 
|-
 
|-
−
|02/07/2014
+
| 02/07/2014  
−
|Elaine Fonaro
+
| Elaine Fonaro  
−
|Technical Writer
+
| Technical Writer  
−
|V1.0
+
| V1.0  
−
|Review and Formatting
+
| Review and Formatting
−
 
 
 
|}
 
|}
  
−
[[category:uncategorized]]
+
[[Category:Uncategorized]]

Revision as of 18:18, 10 March 2014

Sanmina logo.png


SFDC Configuration
Assembly Maintenance
Version MES15 Portal 1.0
Work Instruction


This Work Instruction is Sanmina's corporate standard.
This document is under revision control. The latest revision is located on SanminaNet.
Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.
Contact the IT Global Education and Training Department to submit suggested alterations and or updates.

This edition applies to MES 15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.


SFDC Configuration Setup

The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.

SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses bar-code scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.

The system provides Access Control between the modules of the application, including the function of each screen. The current version has an SFDC Configuration page which provides access to all sub-module pages and their functions (view, add, edit, delete, print and generate output file).

SFDC Configuration

1. To access SFDC Configuration, navigate to Shop Floor Control > Configuration > SFDC Configuration. The main SFDC Configuration and sub modules page is displayed:

Figure 1: MDS Portal – SFDC Configuration Sub modules

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 01.jpg

NOTE: A user only has access to the modules assigned to his/her profile.

Assembly Maintenance

Assembly Maintenance defines the components or sub-assemblies that are merged to a main product. Also defined are the Data Collection Locations where sub-assemblies are merged, and prompts displayed to the operator. Assembly Maintenance tables are configured to perform serial, part, and location validation of items merged to the main product.

List Assemblies

Based on the actual SFDC Configuration, the application displays a list of all Assemblies.

To list assemblies, select Assembly from the SFDC Configuration Maintenance menu.

NOTE: The user only has access to this module if it has been added to his/her profile

Filter Assemblies

There are three available filter fields:

  • Shop Floor ID
  • Location
  • Part

Enter desired filter criteria and selectFilter.

To clear the filter fields, select Clear.

Figure 2: List and Search

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 02.jpg

The filter result is displayed in the Assembly list.

Add Assembly

This functionality allows users to add an assembly.

1) To add an assembly, select the Add button.

Figure 3: Add Assembly

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 03.jpg


The Assembly form is displayed. The user must populate all mandatory fields when adding assembly steps. If the mandatory fields are not populated, an error message is displayed.

Figure 4: Add Assembly Form

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 04.jpg

3) Select the appropriate location form the Location drop-down box.

4) Enter the appropriate part number in the Part Number field.

5) Select Save to create the assembly.

(Leave Part Number field blank if assembly will be configured for ALL Parts.)

6) After this step validates the entered information in the database, the Assembly Step List page is displayed.


(NOTE: The user must add at least one step to the Assembly for it to be saved in the system.)

List Steps

This functionality displays a list with all Assembly Steps.

1. To access the Assembly Step menu, the user must first check the box to the left of the appropriate Shop Floor ID, then select Step List.

Figure 5: Assembly List – Step List

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 05.jpg

The Assembly Step List displays.

The Assembly Step List enables the following Tasks:

  • Add Assembly Step
  • Edit, Copy and Delete
  • Print/Export Filtered Assembly Steps
Add Assembly Step

This functionality adds an assembly step in the system.

To add an assembly step, select Add Assembly Step from the step list screen.

Figure 6: Add Assembly Step

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 06.jpg

The user must populate all mandatory fields (indicated in Red) when adding assembly steps. If the mandatory fields are not populated, an error message is displayed.

Type: The type of Assembly Step that is being created. (Non-Tracked, PTS ID, Standard, Unique Component)

Step: Number automatically generated by the Step Number function.

Component ID Prompt: The prompt displayed to the operator upon scanning the main assembly. This prompt should specify the sub-assembly being added to the main assembly. The prompt length can be up to 16 characters. This prompt is only displayed if the sub-assembly has not been previously installed at this station.

Note: If another Location has the same Process Name with the same Assembly sequence AND the main assembly is scanned there (because of a Manual Move), SFDC prompts for the sub-assemblies to be installed even if there were installed previously.

Note: If the OPTIONS ASM_BY_PROCNAME=YES option is installed in the Setup Data Editor Form, the component prompt is displayed for all Locations with same Process Name that is assigned to the Location in which the assembly is configured.

Component Id Mask: The serial mask of the sub-assembly. The maximum length of the data field is 40 characters. The maximum length of a single ID mask is 20 characters. Multiple ID masks are separated by a comma (,).

Reference Designator: The reference designator (or nomenclature) of the sub-assembly. This is a text string up to 22 characters in length. When a new Component ID prompt is entered for a step, this data field contains the same default value. The field is editable.

Component Part: The part number of the sub-assembly being added to the main assembly. It must exist in the Part Table and is only needed if the Component ID mask is the same for multiple products.

NOTE: Once the component part number is entered, the Shop Floor ID field will be available to populate.

Shop Floor ID- The ID of the Shop Floor associated with the assembly step.

NOTE: Once the Shop Floor ID is chosen, the Component Location field will be available to populate.

Component Location: Valid only if the sub-assembly is tracked. This is the Location where the sub-assembly is expected to be. Using this data field ensures the sub-assembly is ready to be installed into the main assembly.

Once all the required information has been entered, select Save. To exit, select Cancel. To clear all fields, select Clear.

The new assembly step is displayed in the list.

Figure 7: Assembly Step in the list

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 07.jpg
Edit Assembly Step

This functionality allows modification of any available Assembly Steps. If a mandatory field is not populated, an error message is displayed.

1. To edit an assembly step, select an existing assembly step, then select Edit.

Figure 8: Assembly Step List – Edit

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 08.jpg

The Assembly Step Form page is displayed

2. Edit the necessary field(s) then select Save.
Copy Assembly Step Data

This functionality allows user to copy data from one assembly step to another.

1. To copy assembly step data, select an existing assembly step, then select Copy.

Figure 9: Assembly Step List – Copy

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 09.jpg

The Copy Step pop-up is displayed:

2. Enter the desired step that will be a copy of the original selected step.

3. Select Save to confirm.

4. The data from the original selected step will be copied to the new step.

Delete Assembly Step

This functionality deletes the selected Assembly Step.

1. To delete an assembly step, select an existing step, then select Delete.

Figure 10: Assembly Step List – Delete

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 10.jpg

A confirmation message is displayed.

2. Select Yes to confirm deletion. Click No to cancel deletion.

Print/Export Filtered Assembly Step

This functionality prints the current filtered list of steps. The report prints to the default printer for the workstation. The system displays print result information.

1. To print all assembly steps, select Print/Export Filtered Assembly Step.

Figure 11: Print Filtered Assembly Steps

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 11.jpg

A PDF report is generated and the user is able to save the file locally.

Figure 12: Print /Export Step List Report

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 12.jpg

2. Select Save to save the report results.

3. Select Print to print the report results.

Copy Assembly

This functionality allows user to copy data from one Local Assembly to another part.

1. To copy Local Assembly to another part, select an existing Assembly, then select Copy.

Figure 13: Assembly List - Copy Assemblies

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 13.jpg

The Copy Assembly page is now displayed.

2. Enter the data and then select Save.

Delete Assembly

This functionality allows user to delete the selected Local Assembly.

1. To delete Local Assembly, select the Assembly to be deleted, then select Delete

Figure 14: Assembly List - Delete Assemblies

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 14.jpg

1. A confirmation message is displayed. Select Yes to confirm or No to exit.

Print/Export Assembly

This functionality allows user to generate an output file with the Assembly contents.

1. To export assemblies, select Print/Export.

Figure 15: Assembly List - Print/Export Assemblies

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 15.jpg

A PDF report is generated and the user is able to save the file or print from an external program.

Figure 16: Print/Export from List Report

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 16.jpg

Print Shop Floor ID Assemblies

This functionality allows the user to print or export Assemblies for the selected Line. The report prints to the default printer for the workstation.

1. To print/export SFDC ID Assemblies for the selected SFDC ID, select Print SFDC ID Assemblies in the menu.

Figure 17: Print SFDC ID Assemblies

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 17.jpg

A pop-up appears prompting the user to select the appropriate Shop Floor ID.

2. Select a Shop Floor ID from the drop down box.

3. A PDF report is generated.

Figure 18: Print/Export Assembly List Report

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 18.jpg

Print Filtered Assemblies

This functionality allows the user to print the Assembly Steps of filtered assemblies. The report prints to the default printer for the workstation.

1. Select the desired filter criteria to obtain desired list of assemblies to print.

2. SelectPrint Filtered Assemblies in the menu.

Figure 19: Print Filtered Assemblies

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 19.jpg

3. A PDF report is generated.

Figure 20: Print/Export Filtered assemblies

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 20.jpg

Print All Installed Steps

This functionality allows the user to print all installed assembly steps. The report prints to the default printer for the workstation.

1. To print all installed steps, select Print All Installed Steps in the Assembly List menu.

Figure 21: Print All Installed Steps

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 21.jpg

A pop-up appears prompting the user to select the appropriate Shop Floor ID.

2. Select a Shop Floor ID from the drop down box.

3. A PDF report is generated.

Figure 22: Print/Export Installed Assemblies Report

SOP-5-I-MDS0029-C RA1 MDS Assembly Maintenance 22.jpg


Appendix A

COPS Customer Order Processing System
FES Factory Execution Systems
MDS New Manufacturing Data System (Java technology)
GLAD Global Administration
LDAP Lightweight Directory Access Protocol
Mfg Manufacturing
MES Manufacturing Execution Systems
MDS Manufacturing Data System
PRAC Process Access
SFDC Shop Data Floor Collection
SPC Statistical Process Control
SQC Statistical Quality Control


Appendix B

Glossary


Access Control

it is a module that will set the permissions for users and external customers of Sanmina


administrator

the System Administration has full access - all plants, all reports, all users.


component

A component is a specific piece of data that appears on a label, for example: bar code, part numbers, graphic images, line or text. Hence, label components are broken down into several different types: text, graphic images, MDS database values, or a combination of text and database values.


framework

In software development, a framework is a defined support structure in which another software project can be organized and developed. A framework may include support programs, code libraries, a scripting language, or other software to help develop and glue together the different components of a software project.


SFDC Configuration

The rules used to define how SFDC collects data, provides analysis, controls processing and maintains unit histories


Site Minder

Universal login of Sanmina


username

the username is the siteminder username (or a partial string)


Document Revision History

Date Author Title Version Change Reference
08/07/2013 Elaine Fonaro Technical Writer v 1.0 This is the first revision of MDS User’s Guide
02/06/2014 Ashley Martin Technical Writer V 1.0 Accuracy and new images added
02/07/2014 Elaine Fonaro Technical Writer V1.0 Review and Formatting
Retrieved from "https://42qrpt1.42-q.com/mes_wiki/index.php?title=SOP-MES0002_Assembly_Maintenance&oldid=18039"