SOP-MES0036 Generic Attribute Maintenance

42Q Home > Administration > Generic Attribute Maintenance

 

 

 

 

Administration Generic Attribute Maintenance Version MES 15.82 Revision A.1  

 

 

 

 

Introduction

Administrative privileges for the 42Q Portal are located in the Administration menu heading.

In the portal, Administrators are able to access privileges from one convenient location.

Privileges include:

• User Maintenance
• Plant Maintenance
• Site Maintenance
• Profile Maintenance
• Generic Attribute Maintenance

 Also located in the Administration menu heading are Shop Floor Control Administrator, Document Control, Traceability Administrator, Notification & Escalation, and Label Engine Admin.

To access any of the Administration Portlet, the user must sign in to 42Q and then select the Administration expandable heading located in the menu on the left of the screen. 

 

Figure 1: User Sign-In

 

Figure 2: 42Q Welcome

 

 

Generic Attributes Maintenance

The Generic Attributes module allows users to set parameters that will be used at specific MES modules as described below.

To access the Generic Attribute Maintenance page, navigate to Administration>Generic Attribute Maintenance.

 

Figure 3: Generic Attribute Maintenance Main Page

 

The main screen displays all defined generic attributes.

 

Filter Generic Attributes

The user can filter the results by Table and Attribute Name.

1. Enter the Table or Attribute Name in the appropriate field.

2. Select Filter to filter results or Clear to clear the filter fields.

Note: The user can sort the columns alphabetically by clicking on the Table, Attribute Name, or Value fields.

 

Figure 4: Filter Results

 

 

Add Generic Attribute

1. To add a Generic Attribute, select Add Generic Attribute located above the generic attribute list.

2. The Generic Attribute Form will display:

 

Figure 5: Add Generic Attribute

 

3. Select a Table and Attribute Name from the drop-down boxes in the form.

4. Enter a value in the Value field.

5. Select Save to confirm, Reset to clear fields, or Cancel to exit the form.

 

Editing Generic Attribute

1. To edit a Generic Attribute, select Edit Generic Attribute located above the list of Generic Attributes.

2. The Generic Attribute Form will display:

 

Figure 6: Edit Generic Attribute

 

Note: The user is only able to edit the attribute value. The other fields are not available to be edited.

See below for Generic Attributes descriptions:

 

 

 

P

process_parallel_throughput_capacity

Table: Process            
Type:    Numeric
Default Value:  (EMPTY)
Module: MESWeb
Description: Enhance the standards import feature in order to populate TPhr in the SOMS target table.
Functionality: It enables the TPhr if that generic attribute is present and the value is > 0.

 

 

A

add_log_incomplete_container

Table: Project

Type: Boolean

Default Value: the default value is NO.

Module: Muli-Level Containerization

Description: N/A

Functionality: set if is allowed to log some reason/information when an incomplete container is closing.

 

allow_attribute_name_steps_move    

Table: Project

Type: Boolean    

Default Value: FALSE        

Module: Shop Floor Control Configuration

Description: N/A

Functionality: Attribute Step: This allows the user to create a new attribute and move all steps to the new instance

 

allow_config_publish    

Table: Project

Type: Boolean

Default Value: FALSE    

Module: SFDC Configuration

Description: N/A

Functionality: Master configuration to enable or disable Configuration Publish Functionality. The user will still need to have the proper profile permissions.

 

allow_qc_checkpoint_bypass

Table: Project                    

Type: Boolean

Default Value: YES    

Module: KV Control and MLC Maintenance

Description: N/A

Functionality: Allows the user to skip the Reconcile functionality and proceed with KV Operations (Consolidation, Integration, Inspection, and Repair) or Complete Transaction

 

 

allow_repair_value_yes

Table: Project

Type: Boolean

Default ValueTrue / Yes

Module: Production Workbench

Description: Displays dropdown in the repaired code list when the value is set as true when scanning with a defect code-related.

Functionality: When the generic attribute is set on the True / Yes value, the YES option is displayed in the repaired code list.  When the generic attribute is set on the False / No value, the YES option is not displayed in the repaired code list.  

 

allow_repair_value_nff

Table: Project

Type: Boolean

Default Value: True / Yes

Module: Production Workbench

Description: Displays dropdown in the repaired code list when the value is set as true when scanning with a defect code-related.

Functionality: When the generic attribute is set on the True / Yes value, the NFF option is displayed in the repaired code list. When the generic attribute is set on the False / No value, the NFF option is not displayed in the repaired code list.

 

allow_target_revision

Table: Project

Type: Boolean

Default Value: FALSE     

Module: Target Maintenance

Description: N/A

Functionality: Enable or Disable Target Revision functionality.

 

auto_configuration_publish    

Table: Project                

Type: Boolean    

Default Value: ON    

Module: SFDC Configuration

Description: N/A

Functionality: Enable or Disable Auto Publish Configuration

 

 

auto_release_traveler_print_queue

Table: Project                        

Type: Boolean

Default Value: (Empty)     

Module: Tinmon 

Description: N/A

Functionality: N/A

 

autort 

Table: Project

Type: Text

Default Value: Disable

Module: Shop Floor Configuration

Description: N/A

Functionality: If enabled an option to create a manufacturing route based on the order's ERP operation sequences (and resources) will be presented at release time. Disabled by default.

 

autort_complete_location

Table: Project

Type: Text

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the complete (status 30) location to be used for auto-created routes.

 

autort_location_name_algorithm

Table: Project

Type: Numeric

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the algorithm that will be used to generate the auto-created location name. A default algorithm will be provided with the solution.

 

autort_opseq_map

Table: Project

Type: Text

Default Value: Enabled

Module: Shop Floor Configuration

Description: N/A

Functionality: If enabled the auto-route creation process will add/override the order’s operation sequence map as the resolved subroute. Enabled by default.

 

autort_resource_erpop

Table: Project

Type: Text

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines if the newly created (when needed) processes for SETUP, RUN (or both) resources will be configured with the ERP OP flex field.

 

autort_route_name_algorithm

Table: Project

Type: Numeric

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the algorithm that will be used to generate the auto-created route name. A default algorithm will be provided with the solution

 

autort_run_basis_type

Table: Project

Type: Text

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the basis type of RUN resource (default Item). It’s used in combination with autort_run_resource_code_pattern to look for a “run-type” resource.

 

autort_run_resource_code_pattern

Table: Project

Type: Text

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the regex pattern of RUN resource codes (default ^[S|Q].+). It’s used in combination with autort_run_basis_type in order to remove “run-type” resources that match the pattern.

autort_setup_basis_type

Table: Project

Type: Text

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the basis type of SETUP resource (default Lot). It’s used in combination with autort_setup_resource_code_pattern to look for a “setup-type” resource.

 

autort_setup_resource_code_pattern

Table: Project

Type: Text

Default Value: N/A

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the regex pattern of SETUP resource codes (default ^S.+). It’s used in combination with autort_setup_basis_type in order to remove “setup-type” resources that do not match the pattern.

 

autort_subroute

Table: Project

Type: Text

Default Value: Enable

Module: Shop Floor Configuration

Description: N/A

Functionality: If enabled the auto-route creation process will create a subroute for work centers with corresponding SETUP or RUN resources. Disabled by default.

 

autort_subroute_name_algorithm 

Table: Project

Type: Numeric

Default Value: Disable

Module: Shop Floor Configuration

Description: N/A

Functionality: Defines the algorithm that will be used to generate the auto-created subroute name. A default algorithm will be provided with the solution

 

B

base34_device_number_on

Table: Project                        

Type:    Boolean

Default Value: FALSE     

Module: SFDC Configuration

Description: N/A

Functionality: Enable or Disable to auto-create Device with Compute device (location name.substring(1, 4)) when the new location starts with S.

 

bloodhound_container_level

Table: Project                    

Type:    Integer    (Empty)

Default Value: N/A    

Module: MLC Maintenance

Description: N/A

Functionality: Enable Bloodhound customization for a specific container level 

 

 

C

complete_transaction_auto_close_shop_order

Table: Project                    

Type: Boolean

Default Value: NO

Module: MLC Maintenance

Description: N/A

Functionality: Close the Shop Order when the Complete Transaction task is created.

 

complete_transaction_enabled

Table: Project                        

Type: Boolean

Default Value: NO    

Module: MLC Maintenance

Description: N/A

Functionality: Enable or Disable Complete Transaction button. The user will still need to have the proper profile permissions

 

 

 

complete_transaction_extra_quantity_enabled

Table: Project                        

Type:    Boolean

Default Value: NO     

Module: MLC Maintenance

Description: N/A

Functionality: Enable the User to Complete Transaction even when the container has extra items

 

 

 

complete_transaction_multilevel_enabled

Table: Project            

Type: Boolean

Default Value: NO

Module: MLC Maintenance

Description: N/A

Functionality: Complete Transaction Backend

 

 

ctr_export_ftp_dir

Table: Project            

Type: Text

Default Value:  (EMPTY)

Module: MLC Maintenance

Description: N/A

Functionality: Roboship - FTP Directory 

 

ctr_export_ftp_password

Table: Project                    

Type: Text    

Default Value: (EMPTY)

Module: MLC Maintenance

Description: N/A

Functionality: Roboship - FTP Password

 

ctr_export_ftp_server

Table: Project            

Type: Text

Default Value: (EMPTY)

Module: MLC Maintenance

Description: N/A

Functionality: Roboship - FTP Server

 

ctr_export_ftp_user

Table: Project        

Type: Text

Default Value: (EMPTY)     

Module: MLC Maintenance

Description: N/A

Functionality: Roboship - FTP User

 

 

ctr_export_xml_enabled 

  Table: Project

Type: Text

Default Value: 

Module: MultiContainer Browser

Description: N/A

Functionality: N/A

Roboship - ctr_export_xml_enabled = false

custapi_cofc_le_userpwd

  Table: Project

Type: Text

Default Value: (EMPTY)

Module: custom-API

Description: Custom-API LE encrypted password for the read-only user.

Functionality: Used in Custom-API Warehouse solution DBLink to query the label engine details from MDS.    

custai_cofc_le_userreadonly

Table: Project

Type: Text

Default Value: (EMPTY)

Module: custom-API

Description: Custom-API LE read-only user.

Functionality: Used in Custom-API Warehouse solution DBLink to query the label engine details from MDS.

 

 

D

define_usl_on_release    

Table: Project                

Type: Boolean

Default Value: (EMPTY)     

Module: Shop Order Control    

Description: N/A

Functionality: Enable the user to define a Unit Start Location for the released Serial Numbers.

 

 

df_iodyne_trace_ptsdb

Table: Project

Type: Text

Default Value: (EMPTY)

Module: Data Feed

Description: Iodyne traceability data feed pts DB.

Functionality: Used in Iodyne traceability data feed to get the PTS data from MESR using these server details.

 

 

df_iodyne_trace_ptsserver

Table: Project

Type: Text

Default Value: (EMPTY)

Module: Data Feed

Description: Iodyne traceability data feed PTS server.

Functionality: Used in Iodyne traceability data feed to get the PTS data from MESR using this server details.

 

 

df_iodyne_trace_ptspwd

Table: Project

Type: Text

Default Value: (EMPTY)

Module: Data Feed

Description: Iodyne traceability data feed pts encrypted password.

Functionality: Used in Iodyne traceability data feed to get the PTS data from MESR using this server details.  

 

 

df_iodyne_trace_ptsuser

Table: Project

Type: Text

Default Value: (EMPTY)

Module: Data Feed

Description: Iodyne traceability data feed pts user.

Functionality: Used in Iodyne traceability data feed to get the PTS data from MESR using this server details.

 

E

 

enable_target_pagination_view

Table: Project

Type: Integer 

Default Value: N/A

Module: Target Maintenance 

Description: Limits the quantity of the fields visible in Target Maintenance when the user clicks in a target name.

Functionality: Limits the quantity of the fields visible in Target Maintenance when the user clicks in a target name.

exclude_material_part_types

Table: Project

Type: Text

Default Value: N/A

Module: Shop Order Prioritization

Description: Exclude Part Numbers visible in the BOM item.

Functionality: Exclude Part Numbers visible in the BOM item.

 

 

export_container_rule_id

Table: Project

Type: Text

Default Value: The value for this attribute can be any value because it is the user's choice of which name will be used for his rule.

Module: Notification & Escalation

Description: it is the Rule ID that was configured in the Notification Escalation.

Functionality: it is the rule that will be used to send the email with the Oracle response.

 

 

F

force_different_user_approval 

Table: Project    

Type: Boolean

Default Value: False              

Module: QCP Configuration

Description: N/A

Functionality: If generic attribute is turned on, then the QCP checklist will require a different supervisor approval. If the generic attribute is turned off, then a supervisor will have the option to provide approval of the checklist.

 

force_skip_qc_checkpoint    

Table: Project    

Type: Boolean

Default Value: NO                 

Module: MLC Maintenance

Description: N/A

Functionality: Skip QC Checkpoint on Complete Transaction.

 

 

frus_child_ctr_export

Table: Project                    

Type: Text

Default Value:(EMPTY)

Module: MLC Maintenance    

Description: N/A

Functionality: Roboship - Get Fru Component.

 

 

G

global_defcode_mandatory

Table: Project                

Type: Boolean

Default Value: (Empty)     

Module: SFDC Configuration    

Description: N/A

Functionality: Define if Global defcode is mandatory to a Defect Code.

 

global_process_mandatory

Table: Project            

Type: Boolean

Default Value: (Empty)    

Module: SFDC Configuration    

Description: N/A

Functionality: Define if Global process in a mandatory to a Process

 

I

 

include_material_part_types

Table: Project

Type: Text

Default Value: N/A

Module: Shop Order Prioritization

Description: Include Part Numbers visible in the BOM item.

Functionality: Include Part Numbers visible in the BOM item.

K

kit_auto_input_enabled

Table: Project                    

Type: Boolean

Default Value: NO

Module: KV Control    

Description: N/A

Functionality:  Enable on Integration to auto-populate the full quantity for non-serialized items on double click the item

 

kit_auto_save_enabled

Table: Project            

Type: Boolean

Default Value:NO

Module: KV Control    

Description: N/A

Functionality: Enable KV auto save.

 

kit_complete

Table: Project        

Type: Boolean

Default Value:  NO

Module: KV Control    

Description: N/A

Functionality: NOT USED

 

kit_consolidation_ignore_bom_item_type

Table: Project                    

Type: Text (values split by comma)

Default Value: (EMPTY)     

Module: KV Control    

Description: N/A

Functionality: Ignore BOM item types on Consolidation (Standard) Multiple types are accepted if split by a comma.

 

 

kit_e35_custom

Table: Project                        

Type: Boolean

Default Value:  NO

Module: KV Control    

Description: N/A

Functionality: Enable e35 customization.

 

 

kit_enabled_consolidate_by_shop_order

Table: Project                

Type: Boolean

Default Value:  NO

Module: KV Control     

Description: N/A

Functionality: Enable to consolidate the entire Shop Order instead of choosing one Serial Number.

 

kit_enabled_prompt_qty_on_consolidate_for_non_serialized

Table: Project            

Type: Boolean

Default Value: NO

Module: KV Control     

Description: N/A

Functionality: Enable the user to consolidate partial quantity of non-serialized items

 

kit_enabled_short

Table: Project            

Type: Boolean

Default Value: YES

Module: KV Control    

Description: N/A

Functionality: Enable Short Items.

 

kit_genband_complocs

Table: Project            

Type: Integer

Default Value:  7

Module: KV Control    

Description: N/A

Functionality: NOT USED

 

kit_genband_enabled

Table: Project                    

Type: Boolean

Default Value:  FALSE

Module: KV Control    

Description: N/A

Functionality: Enable Genband Customization.

 

kit_genband_files_path

Table: Project                        

Type: Text

Default Value:  /u1/mds14-4vb77/server/linux_src/proxy/kitverify/genband

Module: KV Control    

Description: N/A

Functionality: Genband Directory folder. 

 

kit_ignore_part_type

Table: project                

Type:    Text

Default Value:  FIO

Module: KV Control    

Description: N/A

Functionality: Ignore part types on KV operations. Multiple types are accepted if split by comma

 

kit_inspection_defect_code

Table: Project        l    

Type: Text

Default Value:  KVDC

Module: KV Control    

Description: N/A

Functionality: On save Inspection, if all the items were filled and if the input component doesn't match with the expected component, set default Defect Code and record a defect.

 

kit_inspection_symptom_code

Table: Project            

Type: Text

Default Value:  KVSC

Module: KV Control    

Description: N/A

Functionality: On save Inspection, if all the items were filled and if the input component doesn't match with the expected component, set default Symptom Code and record a defect.

 

kit_integration_ignore_bom_item_type

Table: Project            

Type: Text

Default Value: (EMPTY)

Module: KV Control    

Description: N/A

Functionality: Ignore BOM item types on Integration (Standard) Multiple types are accepted if split by a comma.

 

kit_lbl_name_print_queue

Table: Project            

Type: Text

Default Value: (EMPTY)

Module: KV Control    

Description: N/A

Functionality: Default Label Name and Print Queue to be used to Print a label right after the Standard Consolidation when print by Shop Order.

 

kit_nsnbcn_cust_enabled

Table: Project            

Type: Boolean

Default Value: NO

Module: KV Control    

Description: N/A

Functionality: Enable NSN Customization. 

 

kit_print_label_on_consolidation_complete

Table: Project                        

Type: Boolean

Default Value: NO

Module: KV Control

Description:

Functionality: Enable Print Label when Standard Consolidation is completed. 

 

kit_repair_repair_code

Table: Project                

Type: Text

Default Value: KVRC

Module: KV Control

Description: N/A

Functionality: Set Default Repair Code. 

 

kit_skip_consolidation

Table: Project                

Type: Boolean

Default Value: NO

Module: KV Control    

Description: N/A

Functionality: If the SN was manually moved, and no one route was found. Ask the user to choose a route. 

 

 

kit_sn_lbl_name_print_queue    

Table: Project                    

Type: Text

Default Value:  (EMPTY)

Module: KV Control    

Description: N/A

Functionality: Default Label Name and Print Queue to be used to Print a label right after the Standard Consolidation when print by Serial Number.

 

 

kv_nsn_set_number_cust_enabled_for_families

Table: Project            

Type: Text

Default Value:  DX/IPA

Module: KV Control    

Description: N/A

Functionality: For NSN Customization.

 

kv_nsnbcn_unit_refdes

Table: Project            

Type: Text

Default Value:  BCNSET-

Module: KV Control    

Description: N/A

Functionality: For NSN Customization.

 

kv_nsndxipa_unit_refdes

Table: Project                        

Type: Text

Default Value: SET

Module: KV Control    

Description: N/A

Functionality: For NSN Customization.

 

L

label_download_enable

Table: Project                    

Type: Boolean

Default Value: FALSE

Module: Shop Order Control    

Description: N/A

Functionality: Enable Download PDF Label functionality.

 

label_engine_context

Table: Project            

Type: Text

Default Value: (EMPTY)        

Module: Label Engine Webservice

Description: both

Functionality: lbleng-webservice (this one is fixed, pay attention: this setting is different from hibernate version).

 

label_engine_MDS_active

Table: Project        

Type: Boolean

Default Value:  (EMPTY)

Module: Label Engine Webservice

Description: N/A

Functionality: YES (if plant need print LE labels from MDS, this one should be YES, or else NO).

 

label_engine_port    

Table: Project               

Type: Integer

Default Value: (EMPTY)

Module: Label Engine Webservice

Description: N/A

Functionality: 8081 (tomcat port where the database is housed).

 

 

label_engine_server

Table: Project            

Type: Text

Default Value: (EMPTY)

Module: Label Engine Webservice 

Description:both

Functionality: corpmesX (this should be MES DB server, different from hibernate version, eg:corpmes3).

 

label_engine_site    

Table: Project                

Type: Text

Default Value:  EMPTY)

Module: Label Engine Webservice

Description: hibernate only

Functionality: N/A

 

label_engine_token_JMDS

Table: Project            

Type: Text

Default Value: (EMPTY)

Module: Label Engine Webservice

Description: N/A

Functionality: ********** (this value should be coincident with the one configured for MDS in LE Administration).

 

label_engine_token_SFDC

Table: Project        

Type: Text

Default Value: (EMPTY)

Module: Label Engine Webservice

Description: N/A

Functionality: ********** (this value should be coincident with the one configured for SFDC in LE Administration).

 

 

labor_tracking_mandatory_fields

Table: Project                

Type: Text

Default Value:  direct[job];indirect[indirect labor type]

Module: Labor Tracking    

Description: N/A

Functionality: Define the screen mandatory fields.

 

location_for_container_validation

Table: Project                    

Type: Text    

Default Value: (EMPTY)

Module: MLC Maintenance

Description: N/A

Functionality: N/A

 

lwm_ne_rule_id

Table: Project                

Type: Text    

Default Value: LWMGeneric    

Module: Serialized Item Tracker    

Description: N/A

Functionality: Define the rule to send a notification in case of the quantity of available Serial Numbers for a given part x SIT Type is under low watermark configured.

 

M

material_allocation_low_water_mark

Table: Project

Type: Numeric 

Default Value: 30

Module: Shop Order Prioritization

Description:  To change the percentage to Blue, Orange or Red, in the sidebar once the material is in use.

Functionality:  To change the percentage to Blue, Orange or Red, in the sidebar once the material is in use.

 

mfg_hold_notification_rule_id

Table: project                    

Type:    Text    

Default Value: (Empty)

Module: SFDC Configuration

Description: Email Rule Configuration

Functionality: Default rule to send Mfg Hold Email Notification

 

mfg_hold_release_notification_rule_id

Table: project            

Type:    Text    

Default Value: (Empty)    

Module: SFDC Configuration 

Description: Email Rule Configuration

Functionality: Default rule to send Release Email Notification 

 

 

N

no_route_assigned_release

Table: Project            

Type: Boolean

Default Value: (Empty)    

Module: Shop Order 

Description: N/A

Functionality: Enable or disable the requirement to allow the release if the part number has no route assignment.

 

O

order_line_qty_chk_warning

     

Table: Project

Type:  Boolean

Default Value: (Empty)    

Module: Shop Order 

Description: N/A

Functionality: Raise an expectation on Manage Serial Numbers on Sales order if the quantity of serial numbers to be assigned to the Sales Order exceeds its capacity.

 

 

 

 

P

process_parallel_throughput_capacity

Table: Project                    

Type: String

Default Value:  No default value

Module: EvenBroker

Description: Parallel capacity for the related process used to automatically determine the Throughput per Hour value for the related process when std times are loaded automatically.

Functionality:  Should be configured with a specific process value.

 

ps_configuration_supervisory

Table: Project                    
Type: Boolean
Default Value:  
Module: Production Workbench
Description: Control configuration by supervisor.
Functionality: When this attribute is true, the Production Workbench will only allow changing the configuration by a supervisor.

 

ps_config_stationid_enabled

Table: Project
Type: Boolean
Default Value: False
Module: Production Workbench
Description: It provides the capability to configure Production Workbench based on the Station ID in a modal window. When the user selects a station ID, Production Workbench will be configured by Device mode and will not need a supervisor's authorization. If the user does not select a Station ID, the normal configuration window will be displayed.
Functionality: When this attribute is true, Production Workbench will request the Station ID as a first configuration.

 

 

ps_container_configuration

Table: Project  

Type: Text

Default Value: (EMPTY)

Module: Production Workbench

Description: Add default command.

Functionality: The command that is configured will be added by default to the container’s functionality.

 

 

ps_cycle_time_color_percent

Table: Project            

Type: json

Default Value: (EMPTY)

Module: Production Workbench

Description:e.g..: {"0": "green","50" : "orange", "99": "red"}

Functionality: N/A

 

ps_cycle_time_enable

Table: project        

Type:    Boolean

Default Value:  (EMPTY)    

Module: Production Workbench

Description: To enable the cycle time progress bar

Functionality: Display the cycle time range

 

ps_enforce_group_by_chapter

Table: Project                

Type: Boolean

Default Value:  TRUE

Module: Production Workbench

Description: Force to fill all the information in a chapter

Functionality: "True= force to fill all the information before to pass to the next chapter

False = unforce to fill the information of the chapters"

 

 

ps_duplicable_prompt_component_type

 

Table: Project

Type: Array of text.

Default Value: N/A (if any type of subassembly is configured, then any type of subassembly will be affected).

Module: Production Workbench

Description: This generic attribute will indicate what type of assembly can be copied/cloned.

Functionality: Enter assembly type separated by commas. e.g  Non-Tracked with Quantity, Non-Serialized Batch.

 

 

ps_device_hide_commands

Table: Project
Type: Boolean.
Default Value: (EMPTY)
Module: Production Workbench
Description: Shows or hides the commands.
Functionality: If the value is set to TRUE or YES the commands will not be displayed until a unit is scanned, otherwise Production Workbench will work as it is now.

 

ps_group_by_chapter

Table: Project     

Type: Boolean

Default Value: (EMPTY)

Module: Production Workbench

Description: To grouping the attributes.

Functionality: All the attributes to belong to the same group should be displayed in the same chapter.

 

 

ps_hide_command_titles

 

Table: Project
Type:    Boolean
Default Value:  (EMPTY)
Module: Production Workbench
Description: If it is enabled, hides all the command banners, but if the cursor hovers over a command, the banner will be displayed. If it is disabled, it shows all the command banners.
Functionality: Hides or shows the command banners.

 

 

 

ps_media_file_allow

Table: Project

Type: MIME type

Default Value: image/png,image/jpeg,image/jpg

Module: Production Workbench

Description: Support the MIME Type as this format Type/Subtype.

Functionality: All the MIME Types added in this attribute should be supported in Production Workbench.

 

 

ps_non_serialized_container_command

Table: Project

Type:    Boolean

Default Value: (EMPTY)

Module: Production Workbench

Description: It allows the user to use a different command when the user wants to add Non-Serialized to the container in the container widget.

Functionality: If the “Hold Non-Serialized” option is checked at the container configuration. 

 

 

ps_notifications_time

Table: Project        

Type: 5

Default Value: (EMPTY)

Module: Production Workbench

Description: Set time to display the notification.

Functionality: Establish the time that should be displayed in the notification before close it.

 

 

ps_qcp_hold_lock  

Table: project
Type: Boolean
Default Value: True
Module: QCP Configuration
Description: Enable or disable the QCP checklist as a mandatory step, before users scan serial numbers or fill out the attributes/assemblies.
Functionality: Allow or prevent users to interact with Labor Tracking, assemblies, and attributes based on the generic attribute value.

 

ps_quick_action_panel_enable

 

Table: project
Type: Boolean
Default Value: False
Module: Quick Action
Description: Displays custom buttons that will produce external machine, in order to produce or consume conduit events.
Functionality: Displays custom buttons that help the system to communicate with IoT devices mapped to a given manufacturing location.

 

 

ps_shop_order_scheduling_serials_limit

Table: Project

Type: Integer

Default Value: 5

Module: Production Workbench

Description: Control the Serial Numbers quantity that is going to be displayed inside the Shop Order Panel selected.

Functionality: Limits the number of Serials Numbers that are going to be shown to the user.

 

ps_so_scheduling_active_extra_fields

Table: Project
Type:  Boolean
Default Value: (EMPTY)  
Module: Production Workbench
Description: This generic attribute is to turn on/off the visual color indicator in the shop order schedule list.
Functionality: Turn on/off the visual color indicator in the shop order schedule list that tells user if hands-on is running or not.

ps_so_scheduling_so_gen_attributes

Table: project
Type: Text
Default Value: (EMPTY) 
Module: Production Workbench
Description: Allows to add the names of generic attributes that will be displayed in the shop order schedule in the Production Workbench.
Functionality: Display the generic attributes that were previously configured by the admin to the shop order.

ps_so_scheduling_part_flex_fields

Table: project
Type:    Text
Default Value:  (EMPTY) 
Module: Production Workbench
Description: With its configuration, users can decide the flex fields that want to show in the Shop Order Scheduling panel.
Functionality: It adds the flex fields names that will be displayed.
 

ps_so_scheduling_refresh_time

Table: Project

Type: Numeric

Default Value: The default value of the generic attribute will be 60 sec.

Module: Production Workbench

Description: When the value of shop_order_scheduling attribute is true, then the scheduling panel will be updated every time the configured time passes.

Functionality: The scheduling panel will be updated every time the configured time passes (every 30 seconds).

 

 

ps_so_scheduling_panel orders

Table: project

Type: numeric

Default Value:  The default value of the generic attribute will be 5.

Module: Production Workbench

Description: Configure the number of orders to be displayed in the order sequencing widget.

Functionality: The scheduling panel will display only 5 orders.

 

 

ps_throughput_by_shift    

Table: Project                 

Type: Boolean

Default Value:  (EMPTY)

Module: Production Workbench

Description: N/A

Functionality:  N/A 

 

 

ps_throughput_color_configuration

Table: Project

Type: json

Default Value: (EMPTY)

Module: Production Workbench

Description: e.g.: { "0":"#F8774B", "45":"orange", "80":"#C9DE3C" }   

Module: Production Workbench

Functionality: N/A

 

 

ps_throughput_enable

Table: Project            

Type:    Boolean

Default Value: (EMPTY)

Module: Production Workbench

Description: To enable the throughput bar.

Functionality: Display the throughput range,.

 

 

ps_throughput_qty_hours

Table: Project        

Type: Integer

Default Value: (EMPTY)

Module: Production Workbench

Description: N/A

Functionality: N/A

 

ps_user_login_enabled

 

Table: Project 
Type: boolean
Default Value: true
Module: Production Workbench
Description: This attribute is not available by default, it should be added directly to the database.
Functionality:  Turn on/off that the system requires user credentials.

Note: This attribute is off (false) by default.

 

ps_user_login_disabled

 

Table: Project 

Type: Boolean

Default Value: false

Module: Production Workbench

Description: This attribute is not available by default, it should be added directly to the database.

Functionality:  Turn on and off the user icon (prompt user credentials).

 

pts_database_url

Table: Project. 

Type: Text    

Default Value: jdbc:postgresql://corpmespts3.com/PTSIII_E79?user=ptsreader&password=

Module: KV Control, MLC Maintenance, SIT

Description: N/A

Functionality: SIT is the only one that now connects directly to PTS Webservice.

 

R

receive_sit_range_default_optional_attributes

Table: Project                    

Type: Text    

Default Value: LOT Code,Date Code,MPN

Module: SIT

Description: N/A

Functionality: Default Optional Attributes that are auto-populated on the received sit range.

 

recursive_ctr_export

Table: Project        

Type: Boolean

Default Value: (EMPTY)

Module: MLC Maintenance 

Description: N/A

Functionality: Roboship - Enable to export the serials inside of multiple levels.

 

 

S

so_linkage_active    

Table: Project    

Type: Boolean

Default Value: (EMPTY)

Module: Shop Order Control    

Description: N/A

Functionality: On Release, hide or show SO Linkage option.

 

spc_service_host

Table: Project

Type: Text

Default Value:(EMPTY)

Module: SPC, Conduit

Description: To make a connection between the SPC and Conduit to transmit data.

Functionality: Define the SPC host:Port to call the SPC API.

 

standard_shop_order_max_qty

Table: Project

Type: Integer 

Default Value: YES/NO 

Module: Any site

Description: This generic attribute can be display in any module. It needs to be added manually.

Functionality: Configure maximum number of units in a shop order.

 

T

traceability_warning

Table: Project        

Type: Boolean

Default Value: (EMPTY)

Module: Shop Order 

Description: N/A

Functionality: On Shop Order release, return an error if the Traceability Test fails.

 

U

unit_of_measure

Table: Project        

Type: Boolean

Default Value:  (EMPTY)

Module: MLC Configuration, MLC Maintenance, SFDC Configuration (Part Number)    

Description: N/A

Functionality: Defines option_value on mds_option to be used on Unit of measure

 

V

vlwm_ne_rule_id

Table: Project                    

Type: Text    

Default Value: VLWMGeneric

Module: Serialized Item Tracker

Description: N/A

Functionality: Define the rule to send a notification in case of the quantity of available Serial Numbers for a given part x SIT Type is under very low watermark configured.

 

A

allow_cancel_erp_shop_order    

Table: shop_order                

Type: Boolean

Default Value: FALSE     

Module: Shop Order

Description: N/A

Functionality: Hide or Show the button to cancel an ERP Shop Order

 

allow_cancel_standard_shop_order

Table: shop_order                        

Type: Boolean

Default Value: FALSE    

Module: Shop Order    

Description: N/A

Functionality: Hide or Show the button to cancel a Standard Shop Order.

 

allow_close_erp_shop_order    

Table: shop_order                    

Type: Boolean

Default Value: FALSE    

Module: Shop Order

Description: N/A

Functionality: Hide or Show the button to close an ERP.

 

allow_duplicated_part_number_on_bom    

Table: shop_order            

Type: Boolean

Default Value: TRUE

Module: Shop Order

Description: N/A

Functionality: Allows the user to insert duplicate part number in the BOM.

 

allow_sales_order_commit

Table: shop_order                    

Type: Boolean

Default Value: FALSE

Module: Shop Order

Description: N/A

Functionality: Returns an error on Sales Order commit if this option is disabled.

 

ato_so_order_number

Table: shop_order

Type: Boolean

Default Value: FALSE

Module: N/A

Description: ato_so_order_number

Functionality: N/A

 

C

commit_sales_order_incomplete    

Table: shop_order    

Type: Boolean

Default Value: FALSE

Module: Shop Order

Description: N/A

Functionality: Returns an error on Sales Order commit if this option is disabled and the Sales Order is incomplete.

 

customer_part_number

Table: shop_order

Type: Boolean

Default Value: FALSE

Module: N/A

Description:  N/A

Functionality:  N/A

 

 

D

default_label_name    

Table: shop_order        

Type: Text    

Default Value: (EMPTY)

Module: Shop Order

Description: N/A

Functionality: Global and Default information to be used on Print Label.

 

 

 

default_label_print_mode    

Table: shop_order                

Type: Text    

Default Value: Label Engineor MDS

Module: Shop Order

Description: The legacy mode "MDS" is default if Label Engine is not used.

Functionality: To select the mechanism to print the labels by default. 

 

default_label_print_queue    

Table: shop_order            

Type:    Text    

Default Value:  (EMPTY)

Module: Shop Order

Description: N/A

Functionality: Global and Default information to be used on Print Label

 

 

E

erp_move_bin

Table: wip_movement
Type: Text
Default Value: True
Module: Shop Order
Description: Send the erp bin number information automatically to ERP when the user moves the unit to the next station.
Functionality: Send the erp bin number information automatically to ERP when the user moves the unit to the next station.

 

G

get_labor_time

Table: wip_movement
Type: Boolean
Default Value: False
Module: Shop Order
Description: N/A
Functionality: Enable/disable including shop order direct labor time in wip move xml data.

 

 

get_expiration_date

Table: wip_movement
Type: Text
Default Value: False
Module: Shop Order Maintenance
Description: N/A
Functionality: in combination with the attribute attr_name = expiration_date, the generic attribute get_expiration_date for table wip_movement needs to have the value true for wip move to report the data. 

L

lot_serial_attributes

Table: wip_movement        
Type: array of text
Default Value: different values separated by commas
Module: Shop Order
Description: To add a comma-delimited list of attribute names.
Functionality: To add a comma-delimited list of attribute names, and then the admin has an alternative to reporting attribute data in the attribute section.

 

N

new_completion_xml

Table: wip_movement
Type: Boolean
Default Value: True/False
Module: Shop Order
Description:  Migrate 42Q db to the completion xml format when this attribute is set as ‘True’.
Functionality: Migrate 42Q db to the completion xml format.

 

next_sokey

Table: Shop Order

Type: Boolean

Default Value: FALSE

Module: Shop Order

Description:  695770

Functionality:

 

no_mapped_shop_order_release

Table: shop_order                        

Type:    Boolean

Default Value: TRUE    

Module: Shop Order

Description: N/A

Functionality: Returns an error when the user tries to release an ERP Shop Order that is not mapped.

 

O

oracle_release_default_options    

Table: shop_order            

Type: Text    

Default Value: (EMPTY)

Module: Shop Order

Description: Possible configurations: create_file,create_notes,print_unit_trav,print_wip_unit_trav,print_order_trav,create_assm,print_label,link_so,def_rev,def_usl,def_order_line,create_skl,non_sn_batch.

Functionality: On Release, the options listed will be auto-checked.

 

original_part_number

Table: shop_order

Type:

Default Value: FALSE

Module: 

Description: 150512

Functionality: 

 

 

P

put_away_type

Table: wip_movement                    
Type: Text    
Default Value: False
Module: Part Number Maintenance
Description: N/A
Functionality: in combination with the flex field put_away_type in part maintenance and the value lotserial

 

R

resource_fields_order    

Table: shop_order            

Type: Text    

Default Value: (EMPTY)     

Module: Shop Order

Description: N/A

Functionality: N/A

 

resource_items_order

Table: shop_order                    

Type: Text    

Default Value: (EMPTY)    

Module: Shop Order

Description: N/A

Functionality: N/A

 

S

shop_order_scheduling

Table: shop_order            

Type:  Boolean    

Default Value: off         

Module: Shop Order

Description: N/A

Functionality: Shop Order Enable or Disable Shop Order Scheduling.

 

standard_release_default_options    

Table: shop_order            

Type: Text    

Default Value: (EMPTY)    

Module: Shop Order

Description: Possible configurations: create_file,create_notes,print_unit_trav,print_wip_unit_trav,print_order_trav,create_assm,print_label,link_so,def_rev,def_usl,def_order_line,create_skl,non_sn_batch.

Functionality: Shop Order    On Release, the options listed will be auto-checked.

 

U

unschedule_order_release_error    

Table: shop_order                    

Type: Boolean

Default Value: no    

Module: Shop Order

Description: N/A

Functionality: Return an error when the user tries to release a Shop Order without scheduling first

 

W

wip_traveler_customer_prefix    

Table: shop_order            

Type: Text    

Default Value: (EMPTY)        

Module: Shop Order

Description: N/A

Functionality: Configuration to Print WIP Traveler.

 

wip_traveler_customer_suffix_regex    

Table: shop_order                

Type: Text    

Default Value: (EMPTY)     

Module: Shop Order

Description: N/A

Functionality: Configuration to Print WIP Traveler.

 

 

wip_traveler_start_operation_sequence

Table: shop_order                

Type: Integer    

Default Value: 0

Module: Shop Order

Description: N/A

Functionality: Configuration to Print WIP Traveler

 

 

wip_movement

 

Table: Shop Order

Type: Text

Default Value: (EMPTY)

Module: Shop Order

Description: To configure more than one attribute to send, separate each entry in the attribute_data field by a comma. For example Date Code, Lot Number

Functionality: Identify shop order attributes to send by ERP interface for Serial Completion.

---