How to create CPK/PPK charts

Summary

This How-To Create CPK/PPK Charts document will teach users how to create a new monitor as well as set up a Data Strategy Collection, Standard Control Chart, Available Charts, and Actions, applied to the new monitor.

SPC (Statistical Process Control)  is an industry-standard methodology for measuring and controlling quality during the manufacturing process.

The most notable advantages of using SPC are the following:  

• Companies can dramatically reduce variability and scrap.
• Statistically improve productivity.
• Reduce costs.
• Uncover hidden process characteristics.
• Instantly react to process changes.
• Make real-time decisions on the shop floor.

 

 

How to create a new monitor with a CPK/PPK chart

SPC monitors should be created under an existing monitor group. To create a monitor, users must follow the following steps listed below:

 

1. From the Monitor Group List page, select a group monitor, and then click the GO icon.

 

Figure 1: Monitor Group List Page

 

2. From the Function List page, select Monitor Maintenance.

 

Figure 2: SPC Function List Page

 

3. On the Monitor List page, select New.

 

Figure 3: SPC Monitor List Page

 

 

1. Select Part or Family ID.
2. Enter the Part Number or Family ID, and then use the arrow to add or delete the value.
3. Select Location, Process, or Location Family.
4. Enter the Location, Process, or Location Family, and then use the arrow to add or delete the value.
5. Select Next to go to the next tab.

 

Figure 4: Monitor Tab

 

Collect Data From: Enable SPC to collect data from ‘Now’ or from a past date.

Part Number: The part number to be monitored by SPC.

Family ID: The Family ID is to be monitored by SPC.

Location: The location to be monitored by SPC.

Process: The process to be monitored by SPC.

Location Family: The location family is to be monitored by SPC.

Users can choose from three different options to collect data that will be used to generate a CPK/PPK chart: Auto Collection from Unit, Manual Collection via SPC UI, and Automatic Collection via SPC API.  

• Auto Collection from Unit: This allows the SPC monitor to automatically collect data from the MDS service.
• Manual Collection via SPC UI: Use this option if the end-user needs to customize characteristics for their monitor.
• Automatic Collection via SPC API: Use this option if the end-user needs to customize characteristics for their monitor. The clients, such as PWB, IIOT can push the data to SPC via its monitor API as long as the characteristics in the parameters of the API endpoint exist and match this monitor, the continuous data control charts (such as X bar-R chart, I-MR chart, and CPK/PPK report) will plot.

 

 

 

 

 

How to generate a CPK/PPK chart using ‘Auto Collection from Unit’

To generate a CPK/PPK chart using the Auto Collection from Unit option, follow the below step list:

1. Make sure the Location/Process with the part number users want to monitor has been associated with attributes in Shop Floor Configuration.

 

Figure 5: Attribute Define (Auto Collection from Unit)

 

2. Create a new monitor and configure the Monitor Tab.
3. Select the Characteristics to be monitored, and then use the arrow to add or delete the Characteristics.

 

Figure 6: Data Collection Strategy Tab (Auto Collection from Unit)

Note: To access the Figure 6 page, a precondition must be met: Attributes need to be mapped to Location/Process in MES 101, then the end-users will be able to select attributes (Characteristics) in SPC.

 

Continuous Data: If users want to generate a CPK/PPK chart, this checkbox must be marked. 
Single Unit, Multiple Characteristics: Supports the calculation of one unit, but for multiple characteristics.
Multiple Units, Single Characteristics: Supports the calculation of one characteristic, but for different serial numbers.

4. Select Next to move to the next tab.
5. Mark the Cpk/Ppk Chart checkbox.
6. Enter the value for USL and LSL.
7. Enter the value for Cpk and Ppk.
8. Select the Method of Standard Deviation (within):

• Pooled standard deviation.
• Rbar (Average of subgroup ranges).
• Average moving range.

 

Note: When subgroup size > 1, SPC estimates σ within using one of the following methods: Pooled standard deviation or Rbar. SPC will choose the Pooled standard deviation by default as the Minitab.
When subgroup size = 1, Minitab estimates σ within using the "Average of moving range" method.

9. Click Save to save all the New Monitor configurations.

 

Figure 7: Available Charts Tab (Auto Collection from Unit)

 

10. Scan a serial number.
11. Enter the attribute value in the Production Workbench portlet.

 

Figure 8: Input Data via PWB

 

12. To view the CPK/PPK chart, navigate to: Quality > SPC.
13. Select the monitor, and then select the Chart button to view the chart.

 

Figure 9: CPK/PPK Chart Generated via PWB

 

 

How to generate a CPK/PPK chart using ‘Manual Collection via SPC UI’

This option enables users to push data to SPC using the SPC UI instead of using the Production Workbench Interface.

To generate a CPK/PPK chart using the Manual Collection via SPC UI option, follow the below step list:

 

1. Create a New Monitor and configure the Monitor Tab.
2. Enter the Characteristic name manually, and then click Add.
3. Select Next to move to the next tab.

 

• Single Unit, Multiple Characteristics: This is the default method.
• Multiple Units, Single Characteristics: This subgroup method is the enhancement from SPC V1.2.30. Multi-Units, a single characteristic that means Xbar-R Chart supports the calculation of one attribute, but for different serial numbers.

Figure 10: Data Collection Strategy Tab (Manual Collection via SPC UI)

 

4. Mark the Cpk/Ppk Cart checkbox.
5. Enter the value for USL and LSL.
6. Enter the value for Cpk and Ppk.
7. Select the Method of Standard Deviation (within):

 

• Pooled standard deviation.
• Rbar (Average of subgroup ranges).
• Average moving range.

 

Note: When subgroup size > 1, SPC estimates σ within using one of the following methods: Pooled standard deviation or Rbar. SPC will choose the Pooled standard deviation by default as the Minitab.
When subgroup size = 1, Minitab estimates σ within using the "Average of moving range" method.

8. Click Save to save all the New Monitor configurations.

Figure 11: Available Charts Tab (Manual Collection via SPC UI)

 

9. Select the Input button.

 

Figure 12: Input Data via SPC UI

10. Enter the value for the test field.
11. Enter the value for the Collected By field.
12. Select the Save button.

Figure 13: Collect New Data Line Form

 

13. Select Yes to save the entered data and generate the CPK/PPK chart.

 

Figure 14: Confirmation Message

 

14. Select the Retrieve button to view the CPK/PPK chart.

 

Figure 15: CPK/PPK Chart Generated via SPC UI

 

 

How to generate a CPK/PPK chart using ‘Automatic Collection via SPC API’

In this option, users can input the data using two different applications: IIoT and PWB.

To generate a CPK/PPK chart using the Automatic Collection via SPC API option, follow the below step list:

 

1. Create a New Monitor and configure the Monitor Tab.
2. Enter the Characteristic name manually, and then click Add.
3. Select Next to move to the next tab.

 

Single Unit, Multiple Characteristics: This is the default method.
Multiple Units, Single Characteristics: This subgroup method is the enhancement from SPC V1.2.30. Multi-Units, a single characteristic that means Xbar-R Chart supports the calculation of one attribute but for different SNs.
Summary:  After all settings are defined, users can select Summary to view the data collection strategy summary.

 

Figure 16: Data Collection Strategy Tab (Automatic Collection via SPC API)

 

4. Mark the Cpk/Ppk Cart checkbox.
5. Enter the value for USL and LSL.
6. Enter the value for Cpk and Ppk.
7. Select the Method of Standard Deviation (within):

• Pooled standard deviation.
• Rbar (Average of subgroup ranges).
• Average moving range.

 

Note: When subgroup size > 1, SPC estimates σ within using one of the following methods: Pooled standard deviation or Rbar. SPC will choose the Pooled standard deviation by default as the Minitab.
When subgroup size = 1, Minitab estimates σ within using the "Average of moving range" method.

 

8. Click Save to save all the New Monitor configurations.

 

Figure 17: Available Charts Tab (Automatic Collection via SPC API)

 

Push data via IIOT

To push data via IIOT, users must do the Measurement Configuration, to do so, follow the step list below:

1. Navigate to: Shop Floor Control > Configuration > Measurement Config and select the Recipe Maintenance icon.

 

Figure 18:  Recipe Maintenance

 

2. Click the New + icon to create a recipe for the process and part number.
    

Figure 19:  Create a New Recipe

Create a New Recipe.png

 

3. Return to the Measurement Config menu, and then select the Parser icon.

 

Figure 20: Measurement Config Menu

 

4. Choose a Parser, and then select the + icon.
5. Select the Stations tab.
6. Choose a Station Group, and then select the + icon.
7. Select the New + icon to create a new station for the process that the user has previously chosen in the SPC monitor.
8. Input the Station ID, Name, Device, User ID, and then choose the Process from the drop-down list.
9. Select Save to save the station.

 

Figure 21: Save Station Form

 

Figure 22: Link the Process to a Location

Link the Process to a Location.png

 

10. Select the Show Mappings icon.

 

Figure 23: Show Mappings Icon

Show Mappings Icon.png

 

11. Click on the SPC Mapping button.
12. Select the Part Number, Process and Monitor Name.
13. Select Save Mappings to save changes.

 

Figure 24: SPC Mapping Configuration

SPC Mapping Configuration.png
 

 

14. Select the Configuration Groups tab.
15. Select the sheet icon.

 

Figure 25: Parser Configuration Groups

Parser Configuration Groups.png

 

16. Create a group for SPC Integration.
17. Add dynamic configuration for the group to communicate with SPC API.

 

Figure 26: SPC Integration Items

SPC Integration Items.png
 

 

18. Navigate to: Production > Measurement.
19. Select Manual Test Log.

 

Figure 27: Measurement Menu

 

 

20. Select the corresponding station.

 

Figure 28: Measurement Stations

Measurement Stations.png

 

21. Enter several Serial Numbers and Values into this station.
22. Click Submit.

 

Figure 29: Manual Test Log Serial Number Activities

 

 

23. Navigate to: Quality > SPC.
24. Select the monitor, and then select the Chart button to view the chart.

 

Push data via PWB

To push data via Production Workbench, please follow the step list below:

1. Scan the serial number in the Production Workbench portlet.
2. Select the command ‘Record Monitored Measurement’ to indicate the recording of multiple measurement data to SPC from Production Workbench. After this selection, some fields will be automatically populated, except for the Attribute Value that must be entered by the operator:

 

• SPC Monitor Name?.
• Attribute Name?.
• Attribute Value?: Enter the attribute value (this will be transmitted to SPC even if users do not input the end command).

 

Figure 30: Input Data via SPC API

Input Data via SPC API.png

 

Figure 31: CPK/PPK Chart Generated In via SPC API