Difference between revisions of "SOP-42Q-MES0010 Misc Configuration Maintenance"

From 42Q
Jump to navigation Jump to search
Line 6: Line 6:
 
<center>'''Miscellaneous Configuration''' </center>
 
<center>'''Miscellaneous Configuration''' </center>
  
−
<center>'''Version MDS Portal 1.0''' </center>
+
<center>'''Version MES15 Portal 1.0''' </center>
  
 
<center>'''Work Instruction''' </center>
 
<center>'''Work Instruction''' </center>
Line 22: Line 22:
  
 
==SFDC Configuration Setup==
 
==SFDC Configuration Setup==
−
''This edition applies to MDS Portal 1.0 Application and all subsequent releases and modifications until otherwise indicated in new revisions.''
+
''This edition applies to MES15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.''
  
 
The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.
 
The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.
Line 28: Line 28:
 
SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses barcode scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.
 
SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses barcode scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.
  
 +
The system provides Access Control between the modules of the application, including the portlets of each screen. The current version has an SFDC Configuration page which provides access to all sub-modules pages and its functionalities (view, add, edit, delete, print and generate output file).
 +
 +
'''SFDC Configuration'''
 +
 +
1. To access the SFDC Configuration, navigate to '''Shop Floor Control <nowiki>></nowiki> Configuration <nowiki>></nowiki> SFDC Configuration'''. The main SFDC Configuration and sub-modules page is displayed:
 +
 +
----
 +
 +
'''Figure 1: MES Portal – SFDC Configuration Sub-modules'''
 +
 +
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_01.jpg|framed|none]]
 +
 +
'''NOTE''': A user only has access to the modules assigned to his/her profile.
  
 
===Misc Configuration Maintenance===
 
===Misc Configuration Maintenance===
−
This module provides access to manage Miscellaneous Configurations, such as SFDC ID, Title Line, Screen Update Interval, Inactivity Days, SOMS Site ID, and Work Shift configuration.
+
The portlets under this page provide access to manage Miscellaneous Configurations, such as Shop Floor ID, Line, Title Line, Screen Update Interval, Inactivity Days, Site ID, and Work Shift configuration.
  
−
To access the Miscellaneous Configuration, click on '''Misc Config''' module in the SFDC Configuration page.
+
When the Misc. Config. icon is selected, a list of available SFDC IDs will appear on the following screen.
  
−
The main '''Miscellaneous Configuration''' list is displayed:
+
The user can filter the results by SFDC ID or Title Line.
  
−
'''Figure 1: Miscellaneous Configuration List'''
+
'''Figure 2: Miscellaneous Configuration List – Main Page'''
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_01.png|thumb|none|623px]]
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_02.jpg|framed|none]]
  
 
====List Miscellaneous Configuration====
 
====List Miscellaneous Configuration====
−
This functionality, based on the actual SFDC Configuration, displays the list with all Miscellaneous Configurations.
+
The main page, based on the actual SFDC Configuration, displays the list with all Miscellaneous Configurations.
  
−
To search Miscellaneous Configurations, populate the desired filter fields (SFDC ID, Title Line) and click on '''Filter'''.
+
1. To search Miscellaneous Configurations, enter the desired filter fields (SFDC ID, Title Line) and select '''Filter'''.
  
 
The user is able to edit, delete, print/export and list workshifts.
 
The user is able to edit, delete, print/export and list workshifts.
  
−
Note: The user is able to sort (ascending/descending ordering) the misc list by clicking on the column header.
+
NOTE: The user can sort items in the list in ascending or descending order by clicking on a column header.
 +
 
 +
----
  
 
====Add Miscellaneous Configuration====
 
====Add Miscellaneous Configuration====
−
This functionality enables the user to add Miscellaneous Configurations into the database.
+
This portlet enables the user to add Miscellaneous Configurations to the database.
−
 
 
−
1. To add a Miscellaneous Configuration, click the '''Add Misc Config''' button in the Tasks Page.
 
  
−
The Miscellaneous Configuration Form is displayed:
+
1. To add a Miscellaneous Configuration, select '''Add '''in the Tasks Page. The Miscellaneous Configuration Form is displayed:
  
−
'''Figure 2: Add Miscellaneous Configuration'''
+
'''Figure 3: Add Miscellaneous Configuration'''
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_02.png|thumb|none|623px]]
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_03.jpg|framed|none]]
  
 
2. Populate the mandatory fields:
 
2. Populate the mandatory fields:
  
−
* <font color="#0000FF">'''SFDC ID''' </font>– This is a unique network ID to identify the SFDC PC to the network. Each SFDC ID must be unique in the same database. Usually this is the same name as the Line, without a description. i.e. p99dc1
+
* <font color="#0000FF">'''SFDC ID''' </font>– This is a unique network ID for the SFDC PC. Each SFDC ID must be unique in the same database. Usually this is the same name as the Line, without a description (e.g., p99dc1).
−
* '''Title Line''' – A brief description of the Line. i.e. Plant 99 PCBA
+
* '''Title Line''' – A brief description of the Line (e.g., Plant 99 PCBA).
−
* '''Screen Update Interval''' – The time interval used between updates to the SFDC PC display. This value is normally set to 300.
+
* '''Screen Update Interval''' – The time interval used between updates to the SFDC PC display. The default value is 300.
 
* '''Inactivity Days''' – The number of calendar days a unit may remain at a location before it is listed as inactive on the SFDC PC Serial Number Display.
 
* '''Inactivity Days''' – The number of calendar days a unit may remain at a location before it is listed as inactive on the SFDC PC Serial Number Display.
−
* '''Site Id''' – SOMS Site ID i.e. E99
+
* '''Site Id''' – Site ID (e.g., E99)
−
* '''Download New Multipass''' – Check box to flag the configuration when using Multipass functionality for SOMS.
+
* '''Update All Site Id''' – Check box to flag the configuration when using Multipass functionality.
−
* '''Update All Site Id'''.
+
* '''Download New Multipass''' – Check box to flag the configuration when using Multipass functionality.
−
 
 
−
Click on '''Reset''' to clear the fields or '''Cancel''' to cancel the Misc Config addition.
 
  
−
3. Click '''Save '''to confirm.
+
3. Select '''Save '''to confirm. Otherwise, select '''Reset''' to clear the fields or '''Cancel''' to cancel the Misc Config addition.
  
 
====Edit Miscellaneous Configuration====
 
====Edit Miscellaneous Configuration====
−
This functionality enables the user to modify or update a Miscellaneous Configuration.
+
This portlet enables the user to modify or update a Miscellaneous Configuration.
  
−
1. To edit a Miscellaneous Configuration, select the '''SFDCID''' and click the '''Edit''' button.
+
1. To edit a Miscellaneous Configuration, select an '''SFDC ID''' and select '''Edit'''.
  
−
'''Figure 3: Miscellaneous Configuration List - Edit'''
+
'''Figure 4: Miscellaneous Configuration List - Edit'''
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_03.png|thumb|none|624px]]
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_04.jpg|framed|none]]
  
−
2. Perform the desired modifications and click on '''Save''' to confirm updates. <br>
+
2. Perform the desired modifications and select '''Save''' to complete the edits. <br>
 +
 
 +
----
  
 
====Delete Miscellaneous Configuration====
 
====Delete Miscellaneous Configuration====
−
This functionality deletes the selected Miscellaneous Configuration.
+
This portlet deletes the selected Miscellaneous Configuration.
  
−
Note: It is not possible to delete a Miscellaneous Configuration if a Data Collector is associated to the Line.
+
NOTE: It is not possible to delete a Miscellaneous Configuration if a Data Collector is associated to the line.
  
−
1. To delete a Miscellaneous Configuration, click the '''Delete''' button in the list for the desired configuration.
+
1. To delete a Miscellaneous Configuration, check the box from an item in the list and select '''Delete'''. A confirmation message is displayed.
  
−
'''Figure 4: Delete Misc Config'''
+
'''Figure 5: Delete Misc Configuration'''
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_04.png|thumb|none|624px]]
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_05.jpg|framed|none]]
  
−
A confirmation message is displayed.
+
NOTE: An error message is displayed if a Miscellaneous Configuration with one or more Data Collectors is associated to the line.
  
−
Note: An error message is displayed if a Miscellaneous Configuration with one or more Data Collectors is associated to the Line.
+
2. Select '''Yes''' to confirm. Select '''No''' to cancel.
  
−
2. Click '''Yes''' to confirm, or click '''No''' to cancel the delete action.
+
----
−
 
 
−
3. The Miscellaneous Configuration has been deleted from the database.
 
  
 
====List Workshifts====
 
====List Workshifts====
−
This functionality enables the user to manage the Workshifts.
+
This page enables the user to manage the Workshifts. From this page, the user is able to Add, Edit, or Delete Available Shifts, manage Daily Workshift Assignments, and search Available Shifts.
  
−
To list Workshifts, click the '''Workshift''' button in the list for the desired Miscellaneous Configuration.
+
1. To list Workshifts, click the '''Workshift''' button in the list for the desired Miscellaneous Configuration. The List Workshift Data Page is displayed.
  
−
The List Workshift Data Page is displayed:
+
'''Figure 6: List Workshifts Icon'''
  
−
'''Figure 5: List Workshift Data'''
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_06.jpg|framed|none]]
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_05.png|thumb|none|623px]]
+
'''Figure 7: List Workshift Data'''
  
−
From this page, the user is able to Add, Edit, or Delete Available Shifts, manage Daily Workshift Assignments, and search of Available Shifts.
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_07.jpg|framed|none]]
  
−
To exit the List Workshift Data screen, click the '''Close''' button at bottom right-hand corner of page.
+
2. To exit the List Workshift Data screen, select '''Close''' from the bottom right-hand corner of page.
  
 
=====Add Workshift Data=====
 
=====Add Workshift Data=====
−
This functionality enables the user to add new Workshift Data into the Miscellaneous Configuration.
+
This portlet enables the user to add new Workshift Data into the Miscellaneous Configuration.
  
−
Note: Shifts must be created prior to Daily Workshift Assignments can be made.
+
NOTE: Shifts must be created before Daily Workshift Assignments can be made.
  
−
1. To add a new Workshift data, click the '''Add Workshift Data'''.
+
1. To add a new Workshift data, select '''Add''' under List Workshift Data of the Workshift page. The Workshift Data Form screen is displayed.
  
−
The Workshift Data Form screen is displayed:
+
'''Figure 8: Workshift Data Form'''
  
−
'''Figure 6: Workshift Data Form'''
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_08.jpg|framed|none]]
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_06.png|thumb|none|623px]]
+
2. Populate the following mandatory fields:
  
−
2. Populate the following <font color="#0000FF">'''mandatory''' </font>fields to define the Workshift:
+
* '''Shift Name:''' The name of a workshift with a 2-character maximum text string.
−
 
 
−
* '''Shift Name:''' The name of a Workshift with a 2-character maximum text string.
 
 
:Shift Name Examples: '''S1''' for Shift 1, '''S2''' for Shift 2, '''A''' for Shift A, '''B''' for Shift B, etc.
 
:Shift Name Examples: '''S1''' for Shift 1, '''S2''' for Shift 2, '''A''' for Shift A, '''B''' for Shift B, etc.
  
−
* '''Start Time:''' The time when the present yields are stored and zeroed. This usually occurs just before the start time of the next Workshift. The Start Time is 24 hour '''HH:MM''' format, with a time range of 00:00 to 23:59.
+
* '''Start Time:''' The time when the present yields are stored and zeroed. This usually occurs just before the start time of the next Workshift. The field should be completed in '''HH:MM''' format, with a time range of 00:00 to 23:59.
  
−
3. Click '''Save''' to save, or click '''Cancel''' to ignore.
+
3. Select '''Save''' to save (or select '''Cancel''' to abort).
  
 
4. The new Workshift is displayed in the '''List Workshift Data'''.
 
4. The new Workshift is displayed in the '''List Workshift Data'''.
 +
 +
----
  
 
=====Edit Workshift Data=====
 
=====Edit Workshift Data=====
−
This functionality enables the user to modify an existing Workshift.
+
This portlet enables the user to modify an existing Workshift.
  
−
To edit an existing Workshift, click the '''Edit''' button for desired '''Shift Name'''.
+
1. To edit an existing Workshift, select '''Edit''' for the desired '''Shift Name'''.
  
−
'''Figure 7: Confirmation Message'''
+
'''Figure 9: Confirmation Message'''
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_07.png|thumb|none|624px]]
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_09.jpg|framed|none]]
  
−
Perform the desired modifications to the Workshift Data.
+
2. Make the preferred edits to the workshift data.
  
−
Click '''Save''' to save, or click '''Cancel''' to ignore.
+
3. Select '''Save''' to save, or select '''Cancel''' to abort.
  
 
=====Delete Workshift Data=====
 
=====Delete Workshift Data=====
−
This functionality enables the user to delete an existing Workshift.
+
This portlet enables the user to delete an existing Workshift.
  
−
1. To delete an existing Workshift, click the '''Delete''' button for desired '''Shift Name'''.
+
1. To delete an existing Workshift, select '''Delete''' for desired '''Shift Name'''. A confirmation message is displayed.
  
−
'''''Note: Be aware that it is possible to delete a Workshift even if it has a Daily Workshift Assignment.'''''
+
NOTE: Be aware that it is possible to delete a Workshift even if it has a Daily Workshift Assignment.
  
−
A confirmation message is displayed:
+
'''Figure 10: Delete Confirmation Message'''
  
−
'''Figure 8: Delete Confirmation Message'''
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_10.jpg|framed|none]]
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_08.png|framed|none]]
+
2. Select '''Yes''' to confirm deletion (or '''No''' to cancel).
−
 
 
−
2. Click '''Yes''' to confirm deletion, or No to ignore.
 
  
 
3. The Workshift Data is removed from the '''Available Shifts''' list.
 
3. The Workshift Data is removed from the '''Available Shifts''' list.
  
 
=====Daily Workshift Assignments=====
 
=====Daily Workshift Assignments=====
−
This functionality enables the user to manage Daily Workshift Assignments.
+
This portlet enables the user to manage Daily Workshift Assignments.
  
−
The Workshift Assignment table defines the starting shift times for the workshifts in the SFDC system. Workshift assignment definitions are used to configure the starting time for the SFDC database update performed at the end of a workshift (or prior to the start of the next workshift). The Workshift Assignment table provides up to twenty-eight entries for four workshifts (T1, T2, T3 and T4) assigned for each day of the week.
+
The Workshift Assignment table defines the starting shift times for the workshifts in the SFDC system. Workshift assignment definitions are used to configure the starting time for the SFDC database update performed at the end of a workshift (or prior to the start of the next workshift). The Workshift Assignment table provides up to 28 entries for 4 workshifts (T1, T2, T3 and T4) assigned for each day of the week.
  
−
Note: Shifts must be created prior to Daily Workshift Assignments can be made.
+
NOTE: Shifts must be created prior to Daily Workshift Assignments can be made.
  
−
1. To define a shift change, click the''' List''' '''Workshifts''' button for the desired Miscellaneous Configuration.
+
1. To define a shift change, select '''List''' '''Workshifts''' for the desired Miscellaneous Configuration on the main page. The List Workshift Data Page is displayed.
  
−
The List Workshift Data Page is displayed:
+
'''Figure 11: List Workshift Data – Daily Workshift Assignments'''
  
−
'''Figure 9: List Workshift Data – Daily Workshift Assingments'''
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_11.jpg|framed|none]]
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_09.png|thumb|none|624px]]
+
2. Select the cell for desired day/shift assignment input field in the Workshift Info grid, and then select the desired Shift.
  
−
2. Click the cell for desired day/shift assignment input field in the Workshift Info grid, and then select the desired Shift.
+
NOTE''':''' It is possible to assign only valid shift names displayed in the Available Shifts section.
  
−
'''Note:''' It is possible to assign only valid shift names displayed in the Available Shifts section.
+
3. Select '''Save''' to save the Daily Workshift Assignment, or '''Restore''' to cancel edits.
−
 
 
−
3. Click '''Save''' to save the Daily Workshift Assignment, or '''Restore''' to cancel edits.
 
  
 
====Print/Export Current Line====
 
====Print/Export Current Line====
−
This functionality enables the user to print/export the Miscellaneous Configuration for the current Line. The report results include SFDC ID, Title Line, Inactivity Days, Screen Update Interval, and all Daily Workshift Assignments.
+
This functionality enables the user to print/export the Miscellaneous Configuration for the current line. The report results include SFDC ID, Title Line, Inactivity Days, Screen Update Interval, and all Daily Workshift Assignments.
  
−
1. To print the data current line, click the '''Print/Export''' button for the desired Misc. Configuration in the list.
+
1. To print the data current line, select '''Print/Export''' for the desired Misc. Configuration in the list.
  
 
2. A report is generated.
 
2. A report is generated.
  
−
'''Figure 10: Print/Export Report'''
+
'''Figure 12: Print/Export Current Line'''
  
−
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_10.png|thumb|none|623px]]
+
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_12.jpg|framed|none]]
  
−
----
+
'''Figure 13: Print/Export Report'''
 +
 
 +
[[Image:SOP-5-I-MDS0038-C_RA1_MDS_Misc_Configuration_13.jpg|framed|none]]
  
−
==Appendix A==
+
==Appendix==
  
 
'''Glossary'''
 
'''Glossary'''
Line 254: Line 263:
 
|v 1.0  
 
|v 1.0  
 
|This is the first revision of MDS User<nowiki>’</nowiki>s Guide
 
|This is the first revision of MDS User<nowiki>’</nowiki>s Guide
 +
 +
|-
 +
|02/10/14
 +
|Ashley Martin
 +
|Technical Writer
 +
|v1.0
 +
|Grammar and images review
 +
 +
|-
 +
|02/12/14
 +
|Elaine Fonaro
 +
|Technical Writer
 +
|v 1.0
 +
|Formatting
  
 
|}
 
|}
 +
 +
[[category:uncategorized]]

Revision as of 18:05, 14 February 2014

Sanmina logo.png


SFDC Configuration
Miscellaneous Configuration
Version MES15 Portal 1.0
Work Instruction


This Work Instruction is Sanmina's corporate standard.
This document is under revision control. The latest revision is located on SanminaNet.
Once printed it is an uncontrolled copy. All alterations to this work instruction require approval.
Contact the IT Global Education and Training Department to submit suggested alterations and or updates.


SFDC Configuration Setup

This edition applies to MES15 Portal 1.0 and all subsequent releases and modifications until otherwise indicated in new revisions.

The Shop Floor Data Collection System (SFDC) communicates interactively with the Customer Order Processing System (COPS), and Statistical Process Control/Statistical Quality Control (SPC/SQC). The Manufacturing Data System (MDS) makes the communication between these systems possible.

SFDC provides real-time information used by SPC/SQC and MESWeb to create quality control reports. The data configuration for SFDC PC is handled within the Manufacturing Data System (MDS), which is a complete factory automation system. The SFDC System uses barcode scanning, both manual and automated, to monitor and control a single product line or an entire plant. SFDC Configuration collects data, provides analysis, maintains unit histories, and controls product movement on the manufacturing floor.

The system provides Access Control between the modules of the application, including the portlets of each screen. The current version has an SFDC Configuration page which provides access to all sub-modules pages and its functionalities (view, add, edit, delete, print and generate output file).

SFDC Configuration

1. To access the SFDC Configuration, navigate to Shop Floor Control > Configuration > SFDC Configuration. The main SFDC Configuration and sub-modules page is displayed:

Figure 1: MES Portal – SFDC Configuration Sub-modules

SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 01.jpg

NOTE: A user only has access to the modules assigned to his/her profile.

Misc Configuration Maintenance

The portlets under this page provide access to manage Miscellaneous Configurations, such as Shop Floor ID, Line, Title Line, Screen Update Interval, Inactivity Days, Site ID, and Work Shift configuration.

When the Misc. Config. icon is selected, a list of available SFDC IDs will appear on the following screen.

The user can filter the results by SFDC ID or Title Line.

Figure 2: Miscellaneous Configuration List – Main Page

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 02.jpg

List Miscellaneous Configuration

The main page, based on the actual SFDC Configuration, displays the list with all Miscellaneous Configurations.

1. To search Miscellaneous Configurations, enter the desired filter fields (SFDC ID, Title Line) and select Filter.

The user is able to edit, delete, print/export and list workshifts.

NOTE: The user can sort items in the list in ascending or descending order by clicking on a column header.

Add Miscellaneous Configuration

This portlet enables the user to add Miscellaneous Configurations to the database.

1. To add a Miscellaneous Configuration, select Add in the Tasks Page. The Miscellaneous Configuration Form is displayed:

Figure 3: Add Miscellaneous Configuration

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 03.jpg

2. Populate the mandatory fields:

  • SFDC ID – This is a unique network ID for the SFDC PC. Each SFDC ID must be unique in the same database. Usually this is the same name as the Line, without a description (e.g., p99dc1).
  • Title Line – A brief description of the Line (e.g., Plant 99 PCBA).
  • Screen Update Interval – The time interval used between updates to the SFDC PC display. The default value is 300.
  • Inactivity Days – The number of calendar days a unit may remain at a location before it is listed as inactive on the SFDC PC Serial Number Display.
  • Site Id – Site ID (e.g., E99)
  • Update All Site Id – Check box to flag the configuration when using Multipass functionality.
  • Download New Multipass – Check box to flag the configuration when using Multipass functionality.

3. Select Save to confirm. Otherwise, select Reset to clear the fields or Cancel to cancel the Misc Config addition.

Edit Miscellaneous Configuration

This portlet enables the user to modify or update a Miscellaneous Configuration.

1. To edit a Miscellaneous Configuration, select an SFDC ID and select Edit.

Figure 4: Miscellaneous Configuration List - Edit

SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 04.jpg

2. Perform the desired modifications and select Save to complete the edits.

Delete Miscellaneous Configuration

This portlet deletes the selected Miscellaneous Configuration.

NOTE: It is not possible to delete a Miscellaneous Configuration if a Data Collector is associated to the line.

1. To delete a Miscellaneous Configuration, check the box from an item in the list and select Delete. A confirmation message is displayed.

Figure 5: Delete Misc Configuration

SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 05.jpg

NOTE: An error message is displayed if a Miscellaneous Configuration with one or more Data Collectors is associated to the line.

2. Select Yes to confirm. Select No to cancel.

List Workshifts

This page enables the user to manage the Workshifts. From this page, the user is able to Add, Edit, or Delete Available Shifts, manage Daily Workshift Assignments, and search Available Shifts.

1. To list Workshifts, click the Workshift button in the list for the desired Miscellaneous Configuration. The List Workshift Data Page is displayed.

Figure 6: List Workshifts Icon

SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 06.jpg

Figure 7: List Workshift Data

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 07.jpg

2. To exit the List Workshift Data screen, select Close from the bottom right-hand corner of page.

Add Workshift Data

This portlet enables the user to add new Workshift Data into the Miscellaneous Configuration.

NOTE: Shifts must be created before Daily Workshift Assignments can be made.

1. To add a new Workshift data, select Add under List Workshift Data of the Workshift page. The Workshift Data Form screen is displayed.

Figure 8: Workshift Data Form

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 08.jpg

2. Populate the following mandatory fields:

  • Shift Name: The name of a workshift with a 2-character maximum text string.
Shift Name Examples: S1 for Shift 1, S2 for Shift 2, A for Shift A, B for Shift B, etc.
  • Start Time: The time when the present yields are stored and zeroed. This usually occurs just before the start time of the next Workshift. The field should be completed in HH:MM format, with a time range of 00:00 to 23:59.

3. Select Save to save (or select Cancel to abort).

4. The new Workshift is displayed in the List Workshift Data.

Edit Workshift Data

This portlet enables the user to modify an existing Workshift.

1. To edit an existing Workshift, select Edit for the desired Shift Name.

Figure 9: Confirmation Message

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 09.jpg

2. Make the preferred edits to the workshift data.

3. Select Save to save, or select Cancel to abort.

Delete Workshift Data

This portlet enables the user to delete an existing Workshift.

1. To delete an existing Workshift, select Delete for desired Shift Name. A confirmation message is displayed.

NOTE: Be aware that it is possible to delete a Workshift even if it has a Daily Workshift Assignment.

Figure 10: Delete Confirmation Message

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 10.jpg

2. Select Yes to confirm deletion (or No to cancel).

3. The Workshift Data is removed from the Available Shifts list.

Daily Workshift Assignments

This portlet enables the user to manage Daily Workshift Assignments.

The Workshift Assignment table defines the starting shift times for the workshifts in the SFDC system. Workshift assignment definitions are used to configure the starting time for the SFDC database update performed at the end of a workshift (or prior to the start of the next workshift). The Workshift Assignment table provides up to 28 entries for 4 workshifts (T1, T2, T3 and T4) assigned for each day of the week.

NOTE: Shifts must be created prior to Daily Workshift Assignments can be made.

1. To define a shift change, select List Workshifts for the desired Miscellaneous Configuration on the main page. The List Workshift Data Page is displayed.

Figure 11: List Workshift Data – Daily Workshift Assignments

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 11.jpg

2. Select the cell for desired day/shift assignment input field in the Workshift Info grid, and then select the desired Shift.

NOTE: It is possible to assign only valid shift names displayed in the Available Shifts section.

3. Select Save to save the Daily Workshift Assignment, or Restore to cancel edits.

Print/Export Current Line

This functionality enables the user to print/export the Miscellaneous Configuration for the current line. The report results include SFDC ID, Title Line, Inactivity Days, Screen Update Interval, and all Daily Workshift Assignments.

1. To print the data current line, select Print/Export for the desired Misc. Configuration in the list.

2. A report is generated.

Figure 12: Print/Export Current Line

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 12.jpg

Figure 13: Print/Export Report

File:SOP-5-I-MDS0038-C RA1 MDS Misc Configuration 13.jpg

Appendix

Glossary

Access Control

it is a module that will set the permissions for users and external customers of Sanmina

administrator

the System Administration has full access - all plants, all reports, all users.

component

A component is a specific piece of data that appears on a label, for example: bar code, part numbers, graphic images, line or text. Hence, label components are broken down into several different types: text, graphic images, MDS database values, or a combination of text and database values.

framework

In software development, a framework is a defined support structure in which another software project can be organized and developed. A framework may include support programs, code libraries, a scripting language, or other software to help develop and glue together the different components of a software project.

SFDC Configuration

The rules used to define how SFDC collects data, provides analysis, controls processing and maintains unit histories

Site Minder

Universal login of Sanmina

username

the username is the siteminder username (or a partial string)

Document Revision History

Date Author Title Version Change Reference
08/19/13 Elaine Fonaro Technical Writer v 1.0 This is the first revision of MDS User’s Guide
02/10/14 Ashley Martin Technical Writer v1.0 Grammar and images review
02/12/14 Elaine Fonaro Technical Writer v 1.0 Formatting
Retrieved from "https://42qrpt1.42-q.com/mes_wiki/index.php?title=SOP-42Q-MES0010_Misc_Configuration_Maintenance&oldid=16674"